Karnataka

Active

Works

Buildings

Providing and laying vitrified tiles, providing and fixing mosquito mesh, providing kitchen cabinets, rewelding of balcony grills and handrails, filling of cracks, and execution of other emergent maintenance and repair works in Quarter No. B5-115, Krishna Block, NGV,Koramangala, Bengaluru. (Reserved for SC)

Public Works Department

PWD No.2 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 2 Jul 2026Due tomorrow

Tender Value

Refer Docs

EMD Value

₹10,500

Closing Date

2 Jul 2026, 10:00 pmDue tomorrow

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Providing and laying vitrified tiles, providing and fixing mosquito mesh, providing kitchen cabinets, rewelding of balcony grills and handrails, filling of cracks, and execution of other emergent maintenance and repair works in Quarter No. B5-115, Krishna Block, NGV,Koramangala, Bengaluru.(Reserved for SC)

Tender Information

Tender ID

309103

Reference Number

PWD/2026-27/BD/WORK_INDENT37046

Tender Type

Reserved

Product Category

Buildings

Location

PWD No.2 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate and UDIN NO should be mentioned certified from CA

Requiredvalid kpwd license Class iv & above

RequiredReserved Category Certificate

RequiredValid Domicile certificate

RequiredAssessed bid capacity

RequiredValid G.S.T. Registration Certificate

RequiredWork done certificate issued by the competant authority of rank not less than Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Valid KPWD Class IV Civil License & above

Valid License obtained with the Labour Department to be enclosed

Conditional tenders will not be accepted

Tenderer should have Provided Valid copy of Group Insurance policy for Labors /employees

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The employer is not responsible for any delay in accessing E - Procurement Portal

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner

All scanned documents to be uploaded shall be in original, Submit the original document at the time of technical bid opening or next day and the Executive Engineer reserves the right to verify the original documents before approval

If any, additional information required, the same may be obtained from the office of the Executive Engineer, PWD, No. 2 Building Division, Bangalore during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday, the next working day will be considered

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the Standard tender document Attached. Ongoing works list/commitments self attested to be uploaded

The Tender processing fee shall not be refundable

Contractor should follow strictly the prevailing rules of labour laws and minimum wages act

The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder

If the Successful Bidder has quoted lesser rates than the estimated rates then he should remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected

Terms and condition of Contract as per Approved Standard Tender Document KW-1

The quoted rates by the bidder shall be EXCLUDING GST

Valid G.S.T. Registration Certificate

Tenderer Shall note, that the tenderers those found eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers(ITT) will only be considered for further evaluation

Bidder Should upload the bid capacity calculated as per KW-1 Tender condition, the statements showing the value of existing commitment and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer in charge, not below the rank of an Executive Engineer or Equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 b)Satisfactory completion as prime contractor in any kind of works to an extent of 25% of the cost of the work i.e. Rs 2.08 Lakhs

Satisfactory Performance Certificate

Capabilities of Vendor

valid kpwd license Class iv & above

PWD Registration Certificate (Class I/II/III/IV)

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a)Achieved in at least one financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.8.35 lakhs

Audited CA Certificate of Annual Turnover

Others

Reserved Category Certificate

Others -- Reserved Category Certificate

Valid Domicile certificate

Others -- Valid Domicile certificate

Valid G S T Certificate

Others -- Valid G S T Certificate

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 2 month. B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 2 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- Assessed bid capacity

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹10,500

Important Dates

Last Activity

25 Jun 2026

Published

25 Jun 2026

Bid Opening

4 Jul 2026

Download Ends

29 Jun 2026

BOQ Preview

•

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

•

Providing and fixing PTMT grating of approved quality and colour. - Rectangular type with openable circular lid

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

•

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

•

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore

•

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete. Semi rigid pipe : 32 mm dia

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and fixing bright finished brass tower bolts (barrel type) with

•

necessary screws etc. complete : 250x10mm

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

•

Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre...

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length

•

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 40mm

•

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery)...

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards.

•

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Cleaning of Glazed tiles using floors and surfaces cleaners non corrosive with chemicals Hydrochloric acid, butyl oley tamine and other which are soluble and capable of removing hard and soft stains a...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 37046 sc.docx

Tender Document • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid