REPAIR RENEWAL MAINTENANCE OF LT EXTERNAL ELECT SUPPLY AND UG CABLES INCLUDING CONTROL PANELS AND OTHER ALLIED WORKS AT MKD AND 9 MT AREA AT ARTY CENTRE UNDER GE GOLCONDA

Amount

Note for item Nos 1 & 2 : (a) All existing incoming and out going cables are to be connected to the above panel with proper lugs, glands nuts, bolts etc which shall be deemed to include in the quoted rate. (b) The rate quoted by the contractor shall be deemed to be inclusive of demolition of concrete floors / cutting chases in walls, earth work excavation, PCC foundation etc, and making good the disturbed surfaces to match with the existing surfaces (c) The panel shall be fabricated from a reputed firm(CPRI Approved) .

S&F Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31(9.00 metre long) including two coats of bituminous paint internally and externally for the portion embedded in concrete and two coats of aluminium paint over one coat of red oxide primer to external/ exposed surfaces all as specified and directed. Note: (i) Rate quoted by the contractor shall deemed to includes excavation and earth work, 150mm thick PCC (1:3:6) type C2 (40mm graded stone aggregate below ploe and filled in trench up to 20cm above ground and coping concrete Shall be with PCC (1:2:4) type B1 20mm graded stone aggregate wth necessary formwork (iii) Rate quoted by the contractor shall also deemed to include for taking down carefully the exisitng unserviceable pole, serviceable street light fitting and ACSR conductor including connecting accessories and refixing the same after replacing the new pole with all necessary accessories complete all as specified and directed

S &L in trenches/fixed to walls/poles etc., and testing and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with stranded aluminium conductor of following sizes complete, including taking out of existing cable all as specified and directed. Note :- Earth work & excavation, sand cushioning and brick protection shall be measured and paid separately.

2 core 10 Sqmm

4 Core 16 Sqmm

3.5 Core 25 Sqmm

3.5 Core 35 Sqmm

3.5 Core 50 Sqmm

3.5 Core 70 Sqmm

3.5 Core 95 Sqmm

3.5 Core 120 Sqmm

3.5 Core 150 Sqmm

3.5 Core 185 Sqmm

3.5 Core 240 Sqmm

S & F Stel water tubing , light grade, galvanised as in cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed for the following sizes: -

100mm bore

80 mm bore

50 mm bore

S & F cable end termination jointing kit for 1.1 KV (earthed)grade cable for outdoor end termination heat shrinkable type joint with jointing material and accessories suitable to following sizes of cable complete including taking out old unserviceable one all as specified and directed.

35 Sqmm to 70 Sqmm

95 Sqmm to 150 Sqmm

185 Sqmm to 240 Sqmm

S and F cable jointing kit for 1.1 KV (Earthed) grade cable for outdoor termination heat shrinkable type straight through joint with jointing material and accessories suitable for 3.5 core cable for following sizes of cable complete including taking out old unserviceable one all as specified and directed.

35 sqmm to 70 sqmm

95 sqmm to150 sqmm

180 sqmm to 240 sqmm

S & F stringing of ACSR Conductor steel reinforced of type as directed including stretching, binding using ACSR conductor on insulator complete, on overhead line including taking down of existing conductor all as specified and directed.

Stringing only ACSR Conductor of type as directed including binding using ACSR conductor on insulator on overhead line, complete all as specified and directed .

S&F Stay assembly complete with accessories as shown in electric plate No.1 stay rod 16mm dia including loop type insulator, stay clamps, and also including excavation and earth work, PCC foundation etc., including taking out old unserviceable one all as specified and directed.

M&L Mild steel Cross arm bracing support clamps and back plates fabricated from structural steel sections including nuts, bolts and washers welding bending cold or hot drilling holes for bolts in any shape or sizes as indicated or directed inclusive of one coat of red oxide zinc chrome primer and two coats of aluminium paint, including taking down the existing cross arms etc complete all as specified and directed..

M&L Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two glavanised iron washers and one galvanised iron nut,100mm height, 65mm dia for 1100 Volts grade, including taking down existing insulators all as specifeid and directed.

M&L Shakle type, porcelain, vitreous, white brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts 100mm in height, 115mm dia, working pressure 1100 volts, section of strap 31X5, 14mm dia bolts including taking down the existing one etc complete all as specified and directed.

Cutting & trimming of tree branches any girth and size touching to overhead lines and cleaning the distance 1.5 mtr both sides of overhead line with in a gap of span 35 mtrs each and removing the same cleaning the site all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation, laying of poles in trenches and getting out in hard/dense soil complete all as directed and specified.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as all as specified and directed.

Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a lvevel not exceeding 1.5 mtrs above from the starting point complete all as all as specified and directed.

Supply and spread approved dry river sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as all as specified and directed. Note:- Punned thickness will be measured for payment purpose

M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm laid in trenches for cable protection complete all as directed by Engineer-in-Charge.

M&L precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm laid in trenches as cable protection all as specified and directed.

M & L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including necessary excavation for laying of cable protection pipe all as directed including making good the road/hard standing by using all old/new materials and with PCC (1:2:4) type B1 (20mm graded stone aggregate) 200mm thick, required to match with the existing surface complete all as specified and directed.

M&L Earthing complete with galvanized steel with plate electrode 60 cm x 60 cm x 6.3mm thick buried directly in ground (earth kit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized steel strip 32mm x 6mm dia by means of bolts, nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR part-I connected to earth test point incl necessary earth work and excavation PCC 1:3:6 type C1 using 20mm graded stone aggregate for earth chamber with SSR Part-II RCC cover 50mm thick 1:2:4 mix type B1, using 8mm dia TMT bars reinforcement @ 140mm c/c both ways, watering funnel with water pipe GI pipe 15mm dia medium grade and protection pipe GI 40 mm dia, light grade all as specified and directed in SSR Part II. Earth strip and protection pipe beyond 7.5m shall be measured and paid separately.

S&F PVC separators for suitable for LT over head line of 4 conductors and all as specified and directed

M&L MCCB 415 Volts, 4 pole, adjustable type, 100 Amps, with breaking capacity 25 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

M&L MCCB 415 Volts, 4 pole, adjustable type, 160 Amps, with breaking capacity 25 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

M&L MCCB 415 Volts, 4 pole, adjustable type, 200 Amps, with breaking capacity 25 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

M&L MCCB 415 Volts, 4 pole, adjustable type, 250 Amps, with breaking capacity 36 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

M&L MCCB 415 Volts, 4 pole, adjustable type, 320 Amps, with breaking capacity 36 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

M&L MCCB 415 Volts, 4 pole, adjustable type, 400 Amps, with breaking capacity 36 KA complete with all connected accessories including taking out old U/S one all as specified and directed.

M&L for cleaning thoroughly LT distribution poles of any height and any description (Maximum 9 Mtr long ) with necessary cleaning agent including scrapping of old corroded paint dirt/ rust carefully and applying two coats aluminium paint including marking of pole numbers and colour washing of pole coping , complete all as specified and directed .

M&L for cleaning thoroughly the two pole structure of any height and any description with necessary cleaning agent including scrapping of old corroded paint dirt/ rust carefully and applying two coats aluminium paint including marking of pole numbers and colour washing of pole coping , complete all as specified and directed .

M&L for cleaning thoroughly the four pole structure of any height and any description with necessary cleaning agent including scrapping of old corroded paint dirt/ rust carefully and applying two coats aluminium paint including marking of pole numbers and colour washing of pole coping , complete all as specified and directed .

Supply and install, test the new voltmeter of capacity 0-500V including taking down existing unserviceable Analog voltmeter with electrical connections, complete all as specified and directed.

Supply and install, test the new ammeter of capacity 0-250A/100A including taking down existing unserviceable Analog ammeter with electrical connections, complete all as specified and directed.

Supply and install, test the new digital 3 phase meter including taking down existing unserviceable digital 3 phase meter, complete all as specified and directed.

Supply and install, test the New MPP-S heavy duty Capacitors upto 4 KVAr including taking down existing unserviceable Capacitors with electrical connections, complete all as specified and directed.

All as per item No. 57 but for 5 /7.5/10 KVAr capacity

Supply and fix Advance power factor controller 12 Segment including Comprehensive displays with large, three- digit LED display. 3 Logics (1:1:1), (1:2:2), (1:2:4) to connector banks, with automatic recognition or with standards programs RS-485 Communication with electrical connections including taking down the existing unserviceable Advance power factor controller cpmplete all as specified and directed.

L and S ENTERPRISES

STANDARD AGENCIES

MOHAMMED MUMTAZ ENGINEERING WORKS

MRK CONSTRUCTIONS

Amutha Constructions

Sri Lakshmi Enterprises

SAI ENTERPRISES