SPECIAL REPAIR TO BLDG NO 29 (OR MD ACCN) OF MH KASAULI AT KASAULI STATION AND PROVN OF COVER SHED NEAR FRESH ISSUED SHED AND OVERHEAD COVER FROM UPLOADING POINT TO FRESH SHED AT MIL FARM DAGSHAI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismentling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified.

Dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified.

S & F for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings complete all as specified .

Same as item no 4.00 above but except timber---Do----

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified.

Supplied & fixed in Repair Boarding,20mm thich second class hard wood(Hollock) with nails in any situation (except flooring and skirting) Clean sawn with butt joints,complete all as specified.

M & L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of Creosote,complete all as specified.

S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and Labour for Welded steel wire fabric n.exc 4Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed

-ditto- as abve but except stone

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Material and Labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, all as specified. Note : (Reinforce bar paid and measured separately).

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed .

M & L for Rendering 15 mm thick in cement plaster 1:6 on stone work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed .

Material and Labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified.

Material and Labour .63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 ,complete all as specified.

Material and Labour .63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120,complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed .

M & L for 4 mm thick Non asbestos fibre cement building boards fixed in repair or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified & directed.

Preparation of New Non-AC ceiling boards surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of oil bound distemper over one coat chalk whitening complete all as specified and directed.

Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.

Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified.

Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified.

Taking down shutter of any description n. exc 1.0 sq.m each complete all as specified.

Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed .

Supplied and Fixed IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed .

Supply and Fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified.

Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed .

S&F Factory made solid PVC frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specificaiton and drawing.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fot top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either siude & as gap insert for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing for butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and Fixing 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 and as directed .

S&F Aluminium anodised, barrel tower bolts of extruded section 150 mm long & fixed.

Supply and Fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed .

Supply and Fixing 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified in IS No 208-1991 and as directed .

S&F 100mm Aluminium handles, cast type, anodised, fixed complete all as specified.

Supply and Fixing 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 and as directed .

Marterial and Labour for sheet glass 4.0mm thick, ordinary quality and glazing with oil putty/wooden beads in square n exc 0.5 sq m in each pane complete all as specified and as directed .

S & F 4 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified.

Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .

M & L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm complete all as specified and as directed .

M & L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 3 sqcm and n exc 6 sq.cm complete all as specified and as directed .

M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer.

M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed.

Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and Labour for preparing old wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying one coats of synthetic enamel paint complete all as specified.

Material and Labour for preparing new previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

M&L Preparation of new steel surfaces of any description, not exceeding 10cm in width or girth and treated two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S & F in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified.

M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

M&L PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.

M&L PCC 40 mm thick 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.

M&L 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement all as specified.

S & F coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified.

M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and as directed .

-ditto- as per item no 61.00 above but as in skirting incl 10 mm thick rendering in CM 1:3, complete all as specified.

M & L Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

Providing pre cast cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match all as specified .

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed .

M & L for PCC 1:3:6 Type C2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed .

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified and as directed .

M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S & F 75mm bore PVC (SWR) pipes single socketed in any length by using necessary clamps fixed trenches complete all as specified and as directed .

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed .

S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&LCutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm & not exc 20 cm girth .

S & F in repair for ISI marked 15mm bore chromium plated bib tap of cast copper alloy,fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F in repair of ISI marked 15mm bore ,chromium plated stop valve/Angle valve cast copper alloy screwed down, high pressure,fancy type, screwed both ends for iron pipe or for unions, complete all as specified.

S & F in repairs Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified.

S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed .

S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .

Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

S & F 15 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified.

Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified.

Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified.

M & L for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

M & L for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .

Refixing15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

M & L in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified

S & F in repair sheet glass self asemblyconsisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail

S & F 600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified.

S & F as in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed .

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for sink.

S & F as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (including fixing bolts,flush pipe,CP jet with tube and Plastic seat &cover) complete all as specified and as directed .

S & F as in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed .

M & L 75 mm bore PVC (SWR) floor trap , plain with grating including jointing with solvent cement etc complete all as specified.

S&F 75 mm bore PVC (SWR) vent cowl, Complete all as specified and directed.

S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). Complete all as specified and directed.

S&F in repair for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

Marterial and Labour for Marble work (Makrana white) 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 15 mm thick screed bed or bedding layer in CM 1:4 for laying marble incl moulding, complete all as specified and as directed .

S& F Stainless steel plate rack of size 24"X36"X10" made of 1 mm thick salem stainless steel sheet grade SS-304 with shelves, hooks and railing to keep plates vertically and horizontally, including necessary fixing arrangement fixed in repair complete all as specified.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

Excavating in post holes in hard/dense soil(or similar holes) each n exc 0.5 cu. m, getting out, surplus soil at a level n exc 1.50m above the starting point, complete all as specified.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

M&L Plain Cement concrete 1:3:6 type C2 using 40mm graded stone aggregates as in foundations, filling and mass concrete, all as specified.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins,posts where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-W(Gde-Fe-250) quality- B complete all as specified.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

Amount of credit of Rs. 43611.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Vishal Builder

Varindera And Varindera Construction

M/S CHOPRA & COMPANY