Tender ID

DEFPROC

Active

Works

Civil Works

PROVN OF DRONE PROTECTION NETS FOR BLAST PENS AT AF STATION SRINAGAR

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE AF SRINAGAR | Budgam, Jammu And Kashmir | Srinagar, Jammu And Kashmir

Amount: ₹73.4 LCloses: 18 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published22 Oct 2026
Submission Opens13 Nov 2026
Closes18 Nov 2026
Bid Opening25 Nov 2026

Tender Value

₹73.4 L

EMD Value

₹1.4 L

Closing Date

18 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

CWE AF SRINAGAR

Address

CWE AF SRINAGAR

Work Description

PROVN OF DRONE PROTECTION NETS FOR BLAST PENS AT AF STATION SRINAGAR

Tender Information

Tender ID

2026_MES_795193_1

Reference Number

CWE(AF)SGR/SGR-40/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE AF SRINAGAR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredApplication for bid in Firm letter head (.pdf)

RequiredEnlistment letter or renewal letter (.pdf)

RequiredScanned copy of DD of cost of tender (.pdf)

RequiredCopy of GST Registration No (.pdf)

RequiredCopy of EPF Code (.pdf)

RequiredScanned copy of all the requisite document as per NIT for unenlisted Contractors (.pdf)

Finance

RequiredBOQ (.xls)

RequiredTENDER (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,000

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

GE AF SRINAGAR

EMD Fee Amount

₹1.4 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

22 Oct 2026

Published

22 Oct 2026

Bid Opening

25 Nov 2026

Download Starts

22 Oct 2026

Download Ends

18 Nov 2026

Submission Starts

13 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (26 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	M&L in repairs for 6 mm dia SWR galvanized steel wire rope 6*19 tensile strength 1770 N/MM2 connected to hook etc, complete all as directed and specified	2,029.2	RM	-	-
2	S&F In repair of mild steel wire rope clamp 8 mm with two bolt size for looping of wire rope, complete all as specified and directed.	124	Each	-	-
3	S&F in repair galvanised iron turn buckel of M-16 eye to hook type , body length 170-180 mm complete all as specified and directed.	2,448	Each	-	-
4	S&F stainless steel curtain ring of 30 mm dia with hooks and round shape of thickness 2 mm complete all as specified and directed.	2,448	Each	-	-
5	S&F in repair straining bolts/eye bolt of 16 mm dia including moulding to the required shape and with nut & washers, minimum length 300 mm conforming to FE-290 Gde-E-195 etc, completed all as specified and directed.	31	Kilogram	-	-
6	M&L for rolled mild steel work in Plates (plain or chequerred ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (gde-E-250) Quality B complete all as specified and as directed.	2,716.4	Kilogram	-	-
7	S&F FE-410-W (Gde e-250)quality B for Joist, channel, angle, or tee sections, fixed independently , without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) rolled sections Fe-410-W (Gde-W (Gde-E-250) qualty-B , as in framed work for connecting SWR Wires over blat pen main beams and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.	10,621.44	Kilogram	-	-
8	M&L for rolled sections Fe-410-W (Gde-W (Gde-E-250) qualty-B , as in framed work for connecting SWR Wires over blat pen main beams and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.	1,323.43	Kilogram	-	-
9	M & L Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete	1.26	Cum	-	-
10	Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.	208.67	Square Metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.48 MB

Work Item Documents

TENDER40.pdf

Tender Documents • 1.30 MB

BOQ_891844.xls

BOQ • 3.43 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

M&L in repairs for 6 mm dia SWR galvanized steel wire rope 6*19 tensile strength 1770 N/MM2 connected to hook etc, complete all as directed and specified

2,029.2

S&F In repair of mild steel wire rope clamp 8 mm with two bolt size for looping of wire rope, complete all as specified and directed.

124

Each

S&F in repair galvanised iron turn buckel of M-16 eye to hook type , body length 170-180 mm complete all as specified and directed.

2,448

Each

S&F stainless steel curtain ring of 30 mm dia with hooks and round shape of thickness 2 mm complete all as specified and directed.

2,448

Each

S&F in repair straining bolts/eye bolt of 16 mm dia including moulding to the required shape and with nut & washers, minimum length 300 mm conforming to FE-290 Gde-E-195 etc, completed all as specified and directed.

Kilogram

M&L for rolled mild steel work in Plates (plain or chequerred ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (gde-E-250) Quality B complete all as specified and as directed.

2,716.4

Kilogram

S&F FE-410-W (Gde e-250)quality B for Joist, channel, angle, or tee sections, fixed independently , without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) rolled sections Fe-410-W (Gde-W (Gde-E-250) qualty-B , as in framed work for connecting SWR Wires over blat pen main beams and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

10,621.44

Kilogram

M&L for rolled sections Fe-410-W (Gde-W (Gde-E-250) qualty-B , as in framed work for connecting SWR Wires over blat pen main beams and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

1,323.43

Kilogram

M & L Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete

1.26

Cum

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

208.67

Square Metre