Repair to joinery rolling shutters collapsible gates and railing including aluminium joinery under the AOR of AGE BRI under GE Gomantak Vasco

Amount

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc. 1 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed

M&L for inspecting joinery and carrying out petty repairs, easing adjusting door/ window/ kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed. Note : (i) Each repair job shall be measured as one job.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for 35 mm thick, plain framed, panelled shutters (two panels), factory made with lock rail and panels of 9 mm thick BWP commercial ply or 12 mm thick venered particle board with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS : 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 2nd class hard wood glazed and skeleton shutters 35 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

M&L for 35 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on one face and other face covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 125 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F in repair 300 mm, brass ordinary rat tail rod pattern spring including roller and roller plate complete fixed to wooden/steel frame including necessary welding, cutting, opening etc. complete all as directed.

M&L for 2nd class hard wood (Sal) glazed and skeleton shutters 30 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. with sash bars divided into squares with plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 125 mm long and fixed complete all as specified and directed.

S&F Aluminium plate type II, gate and shutter hook and eye of size 150 mm complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed. Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item.

M&L for 4.8 mm thick sheet glass frosted and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed. Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item.

Cutting holes in brick walls/PCC block wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4, type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed.

Cutting holes in stone masonary wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4, type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F in repair for towel rail 600 mm long of PTMT (minimum weight 190 grm) fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed.

S&F in repair brass mortice lock 4 levers, vertical type, of size 100 mm including plate and two keys including making hole in pressed steel frame complete all as specified and directed.

S&F solar/sun control film 50 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Ball catches (magnetic catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50 x 15 mm and fixed complete all as specified and directed.

S&F in repair plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads cross sectional area exc. 6 Sqcm but not exc. 13 Sqcm in second class hard wood complete all as specified and directed.

S&F in repair second class hard wood boarding 25 mm thick, planed both sides with butt joints fixed with nails in any situation complete all as specified and directed.

S&F in repair 100 mm long hasp & staple Aluminium anodised, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

M&L for forming jambs etc to opening, including cutting, toothing proper bonding into old work, also facing, jointing and pointing to match the existing work, new work built in CM 1:6 complete all as specified and directed.

Removing existing grills from window and refixing the same after carrying out repairs for windows to external/internal side of buidling complete all as specified and directed.

S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/ windows/ ventilators, sliding/ fixed/ openable type with one or more rebates including joining cleat for fixing complete with necessary fittings complete all as specified and directed.

Dismantiling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed .

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of anti corrosive paint over a coat of red oxide primer all as specified and directed.

S&F in repair steel rolling shutters, with lath thickness of 1.25 mm without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed

S&F in repair collapsable steel gate, top hung consisting for channel pickets, pivoted flats bars, top and bottom runners and wheel, handle etc as specification, erected in position and securing runners with holdfast and brackets complete all as specified in clause No. 10.24 of SSR part-I and consisting of following:- MS channel - Hot rolled medium channel 18 x 9 x 3 mm Tee and flats for top and bottom runners with a minimum web of 40 x 12 mm and flange of 40 x 6 mm Distance between centre to centre of channel pickets - 10 cm

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of Aluminium paint paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Supply only MS spring for rolling shutter fo any size or any lenght

Supply only ball bearing for rolling shutter

Supply only gear set for rolling shutter

Supply only rolling shutter shaft assembly including all necessary fittings

Supply only mortise lock steel 6 lever chromium plated with double handles for single shutter to match with existing one Make : Godrej , Universal

Repairs to collapsible gates removal, replacement of worn out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning complete all as specified and as directed.

Repairs to alumunium doors shutters of any size by cleaning, greasing and easing for smooth functioning including replacement of unserviceable minor fittings for the following:- Note: Spare parts if required shall be measured and paid separately under respective items.

Repairs to alumunium window/ventilator shutters of any size by cleaning, greasing and easing for smooth functioning including replacement of unserviceable minor fittings for the following:- Note: Spare parts if required shall be measured and paid separately under respective items.

Supply only rubber beading suitable for fixing glass in alumunium /MS Windows and Doors complete all as specified and directed.

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings.

S&F Deco-104 (10 mm thick), aluminium powder coated grill and fixed to the existing window frame with and incl 'C/F/L' channel (weight not less than 0.136 g/Rm) alround grill, CP brass/ stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles wherever required and fixing approved anodised aluminium standard section (C/F/H) around the opening all complete all as specified and directed.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed to timber frame work with screws or aluminium sections complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation of post holes, filling & mass concrete or in coping complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing or gates, flat iron fillets, angle iron, swan neck including cutting tops to shape, drilling holes, notching for wire etc. conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickess including Nainital or similar pattern roofs covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hip and vally gutters, fixed with self tapping screws as specified complete all as specified and directed.

S&F 1.00 mm thick mild steel plain, black sheet covering to door shutters/frames cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F 1 mm thick PVC sheet, plain colour fixed to existing doors by using rubber base adhesive including removing and re fixing builders hardware complete all as specified and directed.

S&F in repair curtain rod fancy type, made out of 25mm dia MS conduit pipe duly PVC sleeved, fancy type plastic finial, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50 mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed.

M&L for anti termite treatment at contact of wood work by chemical emulsion (in oil or Kerosene based solution) @ 0.50 ltr per hole by drilling 6mm dia hole at down ward angle of 45 degree at 150mm centre to centre and sealing the same to match the existing surface complete all as directed.

M&L for post construction anti termite treatment along the exterior wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear metre including drilling and pluging hole etc in apron.

S&F factory made uPVC white colour casement (Openable) window area exc. 1 Sqm but not exc. 2 Sqm each made of extruded profiles with wall thickness of 2.3 mm ( + 0.2 mm). Window profile with hollow section with multi chamber, frame (62 mm x 67 mm), sash (67 mm x 78.4 mm), T profile (One vertical length in between two shutters) (67 mm x 78.4 mm), Glazing bead (42 mm x 25.8 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 (+ 0.2) mm thick, galvanized steel Frame (29 mm x 25 mm), sash (38 mm x 25.5 mm). T profile (38 mm x 25 mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] complete all as specified and directed. Note: The unit rate quoted by contractor and includes all other connected accessories. Glass and wire mesh shall be measured and paid seperately.

S&F factory made uPVC white colour Two track two panels sliding glazed window upto 1.50 m height made of (small series) frame 50 x 50 mm & sash 54 x 32 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note: The unit rate quoted by contractor and includes all other connected accessories. Glass and wire mesh shall be measured and paid seperately.

S&F factory made uPVG white colour Sliding window area n. exc. 2 Sqm each Three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2 mm). Window profile with hollow section with multi chamber. Frame (90 mm x 42.50 mm), sliding sash (54 mm x 32 mm). Sliding mesh Sash (54 mm x 32 mm) Sliding interlock (One vertical length in each shutter) (30 mm x 35.50 mm), Glazing bead (14.5 mm x 22 mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+ 0.2) mm thick galvanised steel Frame (25 mm x 11 mm) 2 nos, sliding sash (22 mm x 25 mm), frame will be fixed to the wall with 8 mm x 100 mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system and required accessories] complete all as specified and directed. Note: The unit rate quoted by contractor and includes all other connected accessories. Glass and wire mesh shall be measured and paid seperately.

S&F factory made uPVC white colour three track three panels sliding glazed and gauged window (Two No. glazed and one No. wire mesh panels) upto 1.50 m height made of (big series) frame 122 x 54 mm & sash 47 x 64 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note for item No. 82 to 85 : (i) The unit rate quoted by contractor and includes all other connected accessories. (ii) Glass and wire mesh shall be measured and paid seperately. (iii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted without but no extra payment on this account shall be made.

S&F in repair stainless steel sliding/telescopic channel of lenght 20 inch (500 mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45 mm complete all as specified and directed.

SHIVRAJ CONSTRUCTIONS (BID ID -3491349)

AATREYA CONSTRUCTION (BID ID -3490931)

K M SUBHANAIAH (BID ID -3490499)

Super Construction (BID ID -3490201)

Paulraj Painters And Civil Engineering Contractors (BID ID -3490704)

CVS CONSTRUCTIONS (BID ID -3490889)

M/s RAJ CONSTRUCTION (BID ID -3490793)