PROVN OF GRILLS IN THE DOOR AND WINDOW OF OTM ACCN, CABLE CONDUIT COVERS FOR HUB BLDG AND CHAIN LINKING FENCE AROUND JCOs CLUB AND SINGLE JCOs ACCN AT DCN DABATHWA UNDER GE (U) E/M MEERUT CANTT

Amount

Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface

M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregate as in foundation, filling and mass concrete

S&F mild steel posts and struts in fencing , flat iron as in wind ties for roof including securing bolts, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh and similar work confirming to Fe-290 Gde E-165

Supply only Chain link MS galvanisd fencing of any dia wire, any mesh size made into mattresses laped wired laid in position all as specified and as directed and approved by Engr in Charge.(Note :-Weight to be decided by BOO)

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight n exc 4 Kg per Sqm metre as approved by Engineer- in-Charge

M & L for 10 mm dia round bars ( FE - 410 W Gde E 250 quality A or Fe 250 ( Gde E-165) and over deformed or twisted bars cut to length bent to shape reqd incl cranking, bending, hooking ends and binding with mild steel wire (anealed) not less than 0.9 mm dia as in line bars for securing chain link fence etc.,

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not, exc 30cm long (diameter of neck in mm exc 12 but not exc 20).

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in soft/ loose soil.

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Complete all as specified and directed

S & F Rolled MS iron work as in gates of ornamental type conforming of Fe-410-W(Gde-E-250) quality A as in door frame of any size including flat iron for hold fast, in back of chowkats as back plate for support of machine screws including drilling holes and making threads for machine screws complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth ( with out using extra cement ) all as specified and directed..

M&L for preparing newly plastered surfaces and applying two coat of white wash on wall complete all as specified and directed

Returning , filling in, including spreading leveling, watering and well ramming in layers n.exc 25cm in soil

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting points in soil

M&L for preparation of new or previously untreated surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces al as specified.

Supply & fixing anodised aluminium grill ( anodised transparant or dyed to required sgade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved dessign/ pattern size 50x50mesh and 6 to 7 mm thick with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening seze for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening alll complete as per required and direction of Engr-inCharge.

Supply and fixing mild steel framed work such as Grills, Grating, treads, landing baluster, hand rail etc. with ends of bars shouldered and / or riveted , or forged into spikes, framed guard bars, walk ways hand rail wind ties for roof encluding securing bolts and struts in fensing, frame work of water tank and similar work, drillling holes notching for wire etc confirming to Fe-290 Gde E-165 etc. complete all as specified.

M/S KAPIL ENTERPRISES

AEGIS INTERNATIONAL

AR Enterprises

Shikha Enterprises

mohanlal gupta

Rajneesh Jain

M/S AGARWAL CONSTRUCTION CO.

Anand constructions

chaprana enterprises