Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.0 Cr
EMD Value
₹3.9 L
Closing Date
6 Sept 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mangalore Electricity Supply Company Limited
Yashavantha n p
Construction of Kundapura Subdivision office, by dismantling existing deteriorated subdivision office, at Kundapura , Kundapura Division.
MESCOM/2025-26/BD/WORK_INDENT328
MESCOM/2025-26/BD/WORK_INDENT328
Open
Buildings
Two Tender Document System(Two Cover)
MESCOM Superintending Engineer Tech Corporate Office Managaluru
9 documents required · 7 mandatory · 2 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Work Done Certificate:- Satisfactory completion as a prime contractor for at least one single building work to an extent of 50% of the cost of the work i.e., Rs. 152.50 Lakhs by Executive Engineer, equalant or above cadre. Work done certificate without indent number will be rejected. ( from last 5 years from date of closure of tender)
Financial turnover:- The Financial turnover of bidder in any two years out of last 5 year shall not be less then Rs. 407.00 Lakhs . The Tenderer should enclose last Five years balance sheet copy issued by Charted Accountant and IT returns copy
Must executed in any one year, the following minimum quantities of work: Cement concrete (including RCC and PSC) 302.00 cum , Providing and Fixing Mechanical type Storage Mobiliser 49.00 Cum, TMT Steel 33.00 tons ,Size stone/laterite Masonry 192.00 Cum( from last 5 years from date of closure of tender)
Contractor having Valid License Class 2 and above
liquid assets and /or availability of credit facilities of not less than Rs. 76.25 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period) (25% of estimated amount)
Turnover certificate of last five financial year (2019-2024) with UDIN number
Valid EPF Registration Certificaficate
Valid ESI certificate
GST Registration documents
Valid Labour License Certificate
Bankers certificate for an amount mentioned in Bid document
₹5,000
₹3.9 L
6 Aug 2025
6 Aug 2025
8 Sept 2025
30 Aug 2025
30 Aug 2025
Construction of Kundapura Subdivision office, by dismantling existing deteriorated subdivision office, at Kundapura , Kundapura Division.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing & Filling Foundation with granite/trap broken metel 100mm and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labours with all le...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...
First Floor-Column
Second Floor-Column
Terrace Floor-Column
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Filling available excavated earth(excluding rock)in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6(1 cement : 6 coarse sand)
Providing & constructing Laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specifications. I.S. 3620/1979 having compressive strength not less than ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned, chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardant grade unsaturate...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...
Providing 12 mm cement plaster with cement mortar 1:6(1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...
Providing 20 mm cement plaster of mix1:6(1cement:6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including c...
Providing 20 mm cement plaster of mix1:4(1cement: 4 fine sand)to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing comple...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat sur...
Providing and fixing magnetic door stopper with necessary screws, etc. complete
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.- pr...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost o...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Rack:- Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...
Providing and fixing 8" deep uPVC Gutters of make Aquastar/ Euroguard including necessary support system as per specifications including cost of material, labour etc complete
Glass Door cum fixed glass partitions using Jindal anodised section of 4" x 2" on all sides of glass and door completely along with 4 numbers of SS handle of 450mm long.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Installing, testing and commissioning of approved make 15 mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle etc.,complete.
Providing and fixing brass stop cock of approved quality : 20 mm nominal bore Jal or equivalent
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore Jal or equivalent
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore.
Providing and placing on terrece polythene water storage tank , IS : 12701 marked with cover and suitable locking arragements and making necessary holes for inlet, outlet and over flow pipes but witho...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13593 type A, including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion...
1) Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plas...
1) Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plas...
Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings i.e....
Providing and fixing chlorinated Poly Venyl Chloride (CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings inc...
Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings. This includes jointing of...
Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings. This includes jointing of...
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Vertical
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...
Point wiring using copper wire without switch : Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and ru...
25 mm dia 2 mm thick (
32 mm dia 2.5 mm thick
Groove cutting : Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by braci...
25 mm dia 2 mm thick
32 mm dia 2.5 mm thick
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
SUPPLYING AND FIXING PVC / METAL CONDUIT ACCESSORIES.
Supplying and fixing PVC/metal conduit Deep junction box
19/20 mm deep Junction box
25 mm deep Junction box
Supplying And Fixing Metal Fan Box with Round Hook
Supplying And Fixing Metal Fan Box with Round Hook
Extra length of GI pipe of class B 19mm dia for down rod.
SWITCHES, SOCKETS & ACCESSORIES.
upplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove c...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
6A One Way Switch
6A Two Way Switch
6A Three Way socket
Stepped Fan Regulator Two Module
16A One Way Switch .
6/16A Universal Socket
TV/Telephone Socket
RJ45/I.O Outlet Cat-6
CONTROL SWITCH GEARS & ACCESSORIES.
upplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
II - Double Door 12 Way SP & N
III - Double Door 4 Way TP & N
NETWORKING & TELECOMMUNICATION. /CC TV
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and drawing PVC flexible TWO pair telephone unarmoured tinned c...
Supplying and drawing UTP-CAT 6E LAN cable.
Supplying & Fixing of ... ms Cat 6 Patch Cable
Supplying&Fixing of switch mounting rack with power manager&Cable manager.
42U with 650mm depth
Supplying & Fixing of Patch panel for LAN cabling
48 Port 10/100 patch panel
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.
Open Conduit System
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
25 mm dia 2 mm thick
40 mm dia 2.5 mm thick
Fixing Charges.
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC in...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
EARTH STATION & EARTH TAPE.
Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is noncorrosive, thermally conductive, potential to pe...
GI/Copper strips for grounding connections, using necessary fixing materials as required.
25 x6 mm GI strip 8 SWG copper wire
Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.
6A Bakelite Ceiling Rose
LT UG CABLE & Meter Panel
.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivi...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
Supply and fixing of heavy duty cable glands suitable for UG Cables of 1.1 KV Class. (metal only)
Aluminium End Terminal (Lug)32 Sqmm
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Refilling available earth around trenches/pipelines, cables in layers not
exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Lightning Protection System.( Market Rate)
Supply and installation of spike type copper lightening Air Termination with standard copper support rod of 25mm dia fixed to the top most height of the buil...
Supply and fixing of test link for the lightening conductor on the wall at 600mm above the finished ground level with sheet steel enclosure.
GI/Copper strips for grounding connections, using necessary fixing materials as required.
25 x 6 mm GI strip
LT PANEL BOARDS
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complet...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
50-63 A TPN ,MCB (Refer KPWD SR 2023/24,PART-VI,Page 18 Sl. No. 5.18.9 )
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Refer KPWD SR 2023/24,PART-VI,Page 19 Sl. No. 5.35)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C
Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. upto 63 A
Supply and fixing of fully Enclosed Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Power coated of necessary...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow: - In Conformance with standar...
Supply of Fixture/ Fans
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Inpu...
Supplying&fixingofretrofittype-LEDbulb......WwithOPALacrylicdiffusercomprisingofLEDsourcewithCCT6500degreeK,CRI 70%.efficacy 80lumenper W,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...
UPS, VOLTAGE STABILIZERS, BATTERIES & ACCESSORIES
Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all ac...
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.
60 /65 AH capacity
Design, supplying, erecting testing and commissioning of - passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...
Design,manufacturing ,Supply &Installation of Mechanical type Mobile Storage system (Optimizers)as per approved drawings. Base frame of 3.15 mm thick C channel HR sheet (30x100x30mm) cabinet of 22swg(...
5 Bay Single Faced Static unit Size H 2502 X W 3660 X D 381 mm
5 Bay Double Faced mobile unit Size H 2502 X W 3660 X D 381 mm
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4_Kundapura_SubDevision.docx
Tender Document • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .