Construction of office building for accommodating O/o The Chief Engineer Electy, Hotline, KPTCL and staff at 220 K.V Station premises, SRS Peenya, Bengaluru.

Construction of office building for accommodating O/o The Chief Engineer Electy, Hotline, KPTCL and staff at 220 K.V Station premises, SRS Peenya, Bengaluru.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ranite/t...

for RCC beam 60%

for roof slabs and staircase 50%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

PLAIN CEMENT CONCRETE : Providing and laying in posiiton plain cement concrete of mix 1:3:6 with OPC cement @ 220 Kgs with 20mm and down size graded granite metal coarse aggregates @ 0.84 Cum and fine...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 21...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

(PWD SR 2023-24, Volume-2, Page 9, Item No: 5.4)

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing Honne wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. (PWD SR 2023-24, Volume-II, Page ...

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...

Providing & fixing of 2.5 track x 2 panel sliding windows made out of multi chambered PVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with PE(Thermo Plastic Elasto...

Providing and fixing aluminium work for doors, windows, entilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming ...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, wind...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS aldrop 200mm (PWD SR 2023-24 Volume-II page 218 Item No: 12.15.3)

do SS hinges 100 mm (PWD SR 2023-24 Volume-II page 219 Item No: 22.15.9)

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete (PWD SR 2023-24 Volume-II page 105 Item No: 12.61)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR 2023-24 Volume-II page 105 Item No: 12.61)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10mm :(PWD SR 2023-24 Volume-II Chapter-12 page 107 Item No:12.76.1)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manu...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge..(PW...

Stone tile (polished) of 8mm thickness granite stone of any color and shade work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/m2 incl...

Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% inte...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Cutting holes upto 30x30 cm in walls including making good the same: with common burnt clay F.R.P (non-modular) bricks. (PWD SR 2023-24 Vol-2 Pg No:123, Item No: 13.36)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, if fixing the pipe with clam...

b) -do- 25 mm dia (PWD SR 2023-24 Vol-2 Pg No:122, Item No: 13.32.3)

c) -do- 20 mm dia (PWD SR 2023-24 Vol-2 Pg No:122, Item No: 13.32.2)

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class (PWD SR 2023-24 Volume-2, Page-139, ...

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (PWD SR 2023-24 Volume-2, Page-119, Item No:13.15)

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class. (PWD SR 2023-24 Volume-2, Page-138, Item No:14.48a)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing . Rectangula...

Providing and fixing PTMT towel rail complete with brackets fixedto wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with t...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wa...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

.(PWD SR 2023-24 Volume-II Chapter-14 page 125 Item No:14.8)

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

Providing and fixing white vitreous china squatting plate urinal with

integral rim longitudinal flush pipe. (PWD SR 2023-24 Vol-2 P No:135, Item No: 14.24)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& w...

Pro viding and placin g on terrace (at all floor levels) polyethylene water storage tank , IS : 12701 ma rked, with cover and suitable lo cki ng arr angement and making necessary holes for inlet, outl...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia.(PWD SR 2023-24 Volume-II Chapter-14 page 136 Item No:14.28.2.1)

Providing and fixing unplasticised PVC connection pipe with brass unions 20 mm nominal bore :(PWD SR 2023-24 Volume-II Chapter-12 page 116 Item No:13.8.2.2)

Providing and fixing 100 mm sand cast Iron grating for gully trap.(PWD SR 2023-24 Volume-2, Page-136, Item No: 14.29)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor sp...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...

Disposal of debris : Loading and Unloading of Stone Boulder / Stone aggregates / Sand / Kanker / Moorum. KSRRB M100 - 1: Placing tipper at load point, loading with front end loader, dumping, turning f...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch. (PWD Ele SR 2023-24, P-5, I -2.1.2)

Long point above 6Mtr up to 10Mtr from tapping point to out let via switch. (PWD Ele SR 2023-24, P-5, I -2.1.3)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

b) 2.5 Sqmm (PWD Ele SR 2023-24, P-5, I -2.3.3)

c) 4 Sqmm (PWD Ele SR 2023-24, P-3, I -2.3.4)

d) 6 Sqmm (PWD Ele SR 2023-24, P-3, I -2.3.5)

Supplying and drawing UTP-CAT 6E LAN cable.(PWD Ele SR 2023-24, P-27, I -8.1)

Supplying fixing of Network Switches. 24 Port Gigabyte (manageable)(PWD Ele SR 2023-24, P-28, I -8.9.2)

LAN Switch Mounting Rack. 12U with 450mm depth (PWD Ele SR 2023-24, P-28, I -8.4.4)

Supplying & fixing of I/O socket with back box. Double I/o (PWD Ele SR 2023-24, P-28, I -8.10.2)

Supplying and fixing on Load Change Over Switches 4 Poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 400Amps (PWD Ele SR 202-23, P-11, I -5.11.6)

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Double Door 8 Way SP & N)(PWD Ele SR 2023-24, P13, I 5.18.7)

Double Door 12 Way SP & N)(PWD Ele SR 2023-24, P-13, I -5.18.8)

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Fabricating supplying and mounting double door MS box made out of 18 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front ...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(6Amps 1way switch) (PWD Ele SR 2023-24, P-5, I 3.6.1)

6/16 Amps universal socket (PWD Ele SR 2023-24, P-5, I 3.6.11)

Extra for Groove cutting in brick wall/CC floor to the suitable

depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.(PWD Ele SR 2023-24, P-2, I -1.7.1)

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws (PWD Ele SR 2019-20, P-6, I -3.8)

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200x200x65mm (PWD Ele SR 2023-...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection oulded polycar...

Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate

on 230V 50Hz, AC Supply (PWD Ele SR 2023-24, P-22, I -6.1)

Supplying wall mounting fan suitable to operate at single phase 230v A.C.supply.(300mm Sweep)(PWD Ele SR 2023-24, P-23, I -6.5.1)

Fixing all types and all capacities of fluorescent /false ceiling /spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, req...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzACwith latest micro controller based, digital read out of percentage leakage curr...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,GI 8 SWG (PWD Ele SR 2...

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 80 mm conduit using necessary machine screws. (PWD Ele SR 2023-24, P-6, I -3.10.1)

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 100 amps

Supplying and Fixing........mm dia clamps A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL stree...

Preparation and submission of preliminary plans, conceptuals designs, elevations and other details, Preparation and submission of detailed plan, elevation, structural design, electrical layout, plumbi...