RENOVATION OF TOILTES BLOCK OF VEGETABLE OBSERVATORY AREA, FARM I, ICAR RCER, FSRCHPR, RANCHI

Amount

Sub Heading

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 15.7.4 in cement mortar

Demolishing R.C.C. Work manually/by mechanical means including stacking of steel bara and disposal of unserviceable material within 50 metress lead as per direction of Engineer-in-charge.

Earth Work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m, in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within al lead of 50m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level:4.1.3 1:2:4(1 Cement:2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with jamuna sand with common burnt clay non modular bricks.

Brick Work with common burnt clay F.P.S. (Non, moudlar) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :13.2.2 1:6 (1 cement: 6 fine sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring shuttering finishing and reinforcement – all work up to plinth level. 5.1.3 1:2:4 (1 cement: 2 coarse sand (zone-III ): 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resistant mortar bedding, and joints filled with acid and /or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in Charge. 11.21.1.1 in flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand) Acid and alkalli resistant tile

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resistant mortar bedding, and joints filled with acid and /or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in Charge. 11.21.2.1 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkalli resistant tile

Providing and fixing white vitreous china flat back half stall urinal of size 580x 380x350 mm with white PVC automatic flushing cistern, with fitting, standard size C.P. brass fulsh pipe, spreaders with unions and clamps (all in c.p.brass) with waste fitting as per IS: 25565,C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fitting and cutting and making good th walls and floors wherever required: 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S trap, 10 lit low level white PVC flushing cistern, including flush pipe with manually controlled device (handled lever) conforming to IS: 7231, with all fittings adn fixtures complete, including cutting adn making good the walls adn floors wherever required. 17.1.1 white vitreous china Orissa pattern WC, pan of size 580 x 440 mm with integral type foot rests

Providing and fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting adn making good the walls wherever required. 17.7.1 white vitreous china wash basin size 630 x 450 mm with a pair of 15 mm CP brass pillar taps

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stabilty for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC Solvent cement and testing of joints complete as per direction of Engineer in charge. 18.7.2 20 mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC Solvent cement and testing of joints complete as per direction of Engineer in charge. 18.7.1 15 mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC Solvent cement trenching, refukkubg & testing of joints complete as per direction of Engineer in charge. 18.9.9 100 mm nominal inner dia pipes

Finishing walls with acrylic smooth exterior paint of required shade : 13.111.1 old work (two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface

Goods and Service Tax

M/s Jay Gurudeo Enterprises

Shiva construction

ASHIS CHAKRABORTY

SAGIR HUSSAIN

RAMESH DUTT PATHAK