SPL REPAIR TO INTERNAL BLACK TOP ROAD APPROX LENGTH 1000 MTR IN DINJAN MIL STN UNDER GE DINJAN

Amount

M & L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, Sqm or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed.

Scarifying or picking graveled, macadam or bituminous macadam surfaces exc 50mm and n exc Sqm 100 mm deep and area not exc 400 sqm complete all as specified and as directed.

M & L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) with lime stone, sand stone, flint or quartzite, spread, rolled and consolidated to gradient and camber required with 8 to 10 ton power roller, complete all as specified and as directed.

Prepairing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and as directed.

Prepairing blacktop surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and as directed.

M & L applying evenly a priming/tack coat with Cationic Bitumen Emulsion SS1 conforming to IS:8887 at a rate rate of applicationof 0.7 to 1.00 Kg/Sqm on surfaces of WMM/VVBM as specified in Table 500-3 of MoRTH specification of road and bridge works 2013, using machanical sprayer complete complete all as specified and as directed.

M & L applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanica sprayer after cleaning of existing surface as specified and directed.

M&L semi-dence asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix.rolled and compacted to required camber and gradient complete all as specified and directed

Premix bituminous,macadam laid/rolled and compacted to required gradient and camber (consolidated thickness) 50mm using paving bitumen of any penetration complete all as specified and directed

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions & all as specified and as directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc & all as specified and directed

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profilr shoe, glass beads dispensar, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, lobour, T & P, cleaning the road surface of all dirt,seals , oil, grease and foreign material etc all as specified and directed. Note : Thickness 2.5mm shall be exclusive of glass bends as per IRC :35

M&L Continuous brick edging; with width equal to the with of the brick; laid dry on end vertically all as specified and as directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all costs such as royalty if any transportation taxes etc. for area filling / forming including raising earth spreading in layers not exc 30 cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high / depth from EGL. Notes:- (i) Earth required for the item shall be suppied by contractor out side MOD land of any lead at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc. shall be deemed to be included in the unit rate quoted by the contractor. (iii) with reference to clause 3.6 of MES schedule Part-II on serial page no- 21 it is clarified that measurement of the above item shall be finished embankment/ traverse of filled earth after consilidation/ copmaction and 5% deduction shall be made from measured and calculeted volume to allow for increase in bulk. (iv) Total quantity/ partial of earth may not be available in Dinjan area. The contractor shall bring the earth outside area it is advised to quoted the rate considering availability of soil and its lead involved all as specified and as directed.

S&F road safety conve mirror made up of polycarbonate and body made of ABS/Fibber/Plastic of size 80 cm dia all as specified and directed. Make : Gogiya plastic Cat No RSCM -80 or equivalent from approved list of make.

MAHABAHU ENTERPRISE (BID ID -3418830)