RequiredOEM Authorization Certificate Bid to RA enabled Yes T – Shirt ( 31 pieces ) ( Under PAC ) Make na Model niviaultra2020-2(combo) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) UTILITY Utility Unisex * DIMENSIONS Size Large (L) Large (L) Length of T Shirt (cm) 76 ( Large ) * Width Across Chest (cm) 55 ( Large ) * Sleeve Length (cm) 62 ( Large
RequiredFull Sleeve ) * 1/5 Depth of hemming/binding at neckline
Requiredsleeve end and bottom binding 2 cm * MATERIAL Material ( composition ) 100% Polyester 100% Polyester Mass of Material (g m²) 180 120
Required130
Required140
Required160
Required180
Required200
Required220
Required240
Required260 Knitting Plain ( Single Jersey ) Knitted Plain ( Single Jersey ) Knitted Count of Yarn (Ne) NA * pH value of aqueous extract 6.0 to 8.0 ( Hot Method
Requiredas per IS: 1390 ) * Neck Binding/Collar Self Material * Bottom Hem ( Bottom Binding ) Self Material * Sleeve end Binding Self Material * Lining Without Lining Without Lining Lining Material Not Applicable * Mass of Lining (Gram per Square Meter) Not applicable * Netting mesh No of holes on base & bias within 625 Square millimeter Not Applicable * Colour of Mesh Lining Not applicable * PATTERN Neck Type Round Neck V- Neck
RequiredRound Neck
RequiredPolo Neck
RequiredWith Collars and Buttons Sleeve Type Set in * Sleeve Half Sleeve Half Sleeve Number of Buttons in T Shirt with Collar Not applicable * Side Slit Without * Depth of side slit ( in case of T Shirt with Side Slit) (cm) Not applicable * Pocket Without Pocket Without Pocket Size and position of pocket ( in case of T Shirt with Pocket ) ( Width X depth ) Not applicable * STITCHING Sewing Thread 145 d tex X 3
RequiredPolyester * 2/5 Raw edges
Requiredif any shall be bound by overlock stitching Yes * Stitches per dm ( min ) 36 * COLOUR Colour Self Design Self Design COLOURFASTNESS OF FABRIC AND DEPARTMENTAL LOGO Colourfastness to Washing [IS/ISO 105-C10
RequiredTest- C (3)] Change in Colour – 4; Staining of Adjacent Fabric – 4 * Colourfastness to perspiration ( IS 971 ) Not applicable * Colourfastness to Rubbing ( IS 766) Not applicable * Colourfastness to Light ( IS 2454 ) Not applicable * Colour fastness – Potential to phenolic yellowing of fabric 4 ( Test method – ISO 105-X18:2007
RequiredLatest) * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Mesh Lining Change in Colour- 4; Staining of Adjacent Fabric- 4 * Colourfastness to perspiration ( IS 971 )- Mesh Lining 4 * OTHER REQUIREMENTS Pilling Resistant [after 5 hours Test as per IS 10971 (Part 1)]
Requiredmin 4 * Dimensional stability to washing
RequiredShrinkage or Elongation Percentage
Requiredmax ( IS 2977 latest)
Requiredin lengthwise and width wise direction 3 * Spirality
Requiredpercentage
RequiredEnumerable +/- 4 N/A Mandatory max ( After one wash ) ( IS/ISO 16322-1:2005 ) ( Washing as per ISO 6330- 2A at 60 degree C ±4 * Label Tagless * LOGO AND MARKING Logo Marking As per buyer's requirements As per buyer's requirements Type of Logo Printed * Embroidery Thread for Logo Not applicable * TEST REPORT Availability of Test No * 3/5 Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Name of the Lab NA * Address of The Lab NA * Test Report No. NA * Test Report Date NA * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Not applicable * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
