SPL REPAIR TO ADM BLOCK NO P-105 OF HQ INF BDE AT BIKANER MIL STN UNDER GE (N) BIKANER

M&L for inverter point wiring for light/fan/mobile charging point with 2.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade(ISI Matked) complete all as specified and directed by Engr-in-charge.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided.

Taking down cement plaster, any description on brick or stone or cement concrete walls including any tiles and raking out joints, hacking for key, scrubbing down with water complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Taking down shutter exc 1 sqm and n exc 2 sqm each and refixing in the same opening after rescuring or easing & adjustment all as specified and directed by Engineer-in Charge.

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and romoving to store

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

S&F Buzzer ,Ding Dong AC,230 volt ,single pole complete all as specified and as directed by Engineer-in-charge.

Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified

Dismantling cast iron /PVC pipes fixed to walls or laid in trenches in any position of any type.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr In Charge

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified.

M&L half brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor /Roof and finished even and fair complete all as specified.

M&L for Rendering 15 mm thick in two layers on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors and skirting ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and directed

M&L Glazed ceremic colour tiles in vertical surfaces 300x450x7/8 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete etc all as specfied and directed.

M&L for 7-8 mm thick dark shade Vitrified ceremic tiles (square/Rectangular) polished ,area of each tiles not exceeding 0.36 Sqm as in floors over 15 mm thick screed in CM 1:6 jointed in neat cement slurrry and pointed in white cement slurry to match the shade of existing surfaces.

ditto as per Serial item above 22 but with 10 mm thick in CM 1:4 as on vertical surface.

M&L for 10 mm thick dark shade double charged Vitrified ceremic tiles (square/Rectangular) polished ,area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm as in floors over 15 mm thick screed in CM 1:6 jointed in neat cement slurrry and pointed in white cement slurry to match the shade of existing surfaces.

ditto as per Serial item above but with 10 mm thick in CM 1:4 as on vertical surface all as spfd.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

M&L Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform or as in vertical surface over 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair including dismantling if required Complete all as specified and directed

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement complete all as specified.

S&F Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 all as specified .

M&L for MS TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for MS TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia

M&L for MS TMT bars 5 mm to 10 mm dia in reinforcement, cut to length, bent to shape required as in stirrups and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for Reinforced cement conc M-25 design mix using 20 mm graded stone aggregate as in slab supported on walls , beam, and columns in floors,roofs landings , balconies etc.

M&L for Reinforced cement conc M-25 design mix using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts

M&L for Reinforced cement conc M-25 design mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span

M&L for Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in chajjas incl necessary formwork and the like, all as specified and directed by Engr-in-Charge.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .

Form work to sides and soffits of roof beams incl supports over hangs etc finished rough

Form work to edges of concrete flats, breaks ,conc railing nexc 200mm wide finished roughthick

Formwork to sides of square/Rectangular etc pillars, posts, struts, piers,columns, and stanchions rough finish surface all as specified

Supply only liquid water proofing compound complete all as specified.

Removal of existing PCC/Brick bat Coba/Mud phuska /APP membrane from the roof stacking the reusable material and disposal of Unserviceable rubbish outside the campus as direction by Engg In Charge but outside in 3 KM.

M&L 15 mm rendering in CM(1:4) over existing/old RCCSlab/surfaces after dismantling /taking down existing roof treatment complete all as specified and directed by Engg In Charge.

Cleaning of surface of loose dust and grit and cement slurry etc. by means of wire brush dust removing and scrapper etc .Pot holes/cracks shall be repaired with cement admixed with polymer as per manufacturer instructions complete all as specified and directed by Engg In Charge.

Providing PCC coving /gola along vertical parapets of size 75 mm x 75 mm with concrete mix (1:2:4) type B1 using WPC of approved make etc complete all as specified and directed by Engg In Charge.

The surface shall be treated with PU Elastoseal primer with Epoxy primer to seal the pores and enhance the adhesion of the coating,supplying and applying single component waterproofing liquid membrane based on pure,elastomeric,polyurethane resin cold applied of spray/brush applied membrane with an elongation of (650%+,- 50 ) and tensile strength not less than 2 Mpa ,crack bridging ability not less than 2 mm.No leakage upto 5 bars of water pressure.shore hardness > 50 shore. The Minimum thickness to be applied shall be 1.5 mm,( overall )in two layers (each layer 750 micron) or as per manufacurer's instructions so as acheive thickness not less tha 1.5 mm complete all as specified and directed by Engg In Charge.

Providing and laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75 mm complete all as specified and directed by Engg In Charge.Note :- For Roof Treatment process Make of PU Primer /Membrane :- SIKA/BASF,BERGER/STP FOSROC/ SAINT GOBIN /PIDILITE

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in mud stops or roof kerbs, etc all as specified and directed by Engr-in-Charge

Bus Bar Chamber with MCCB.

Supply and fixing of 100 mm SS Butt hinges, complete all as specified.

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed.

Material and labour for 150 mm stainless steel handles all as specified.

S&F SS sliding door bolt, length 250 mm including a minimum of 6 bolts, nuts and washers all as specified

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 150 mm complete

S&F for 150mm size Stainless steel tower bolts, all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window or Two track two panels sliding window with fly proof S.S wire mesh /Glazed , made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners of suitable size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed /openable glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 1.50 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners of suitable size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone conc. or brick surroundsglazed with putty or fixed with beads

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F 3 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair 20 mm dia mild steel curtain rod chromium plated incl brackets, stops etc. complete all as specified.

S&F aluminium anodised haspen stapple incl bolt to hinge plate 100 mm long

S&F extruded anodised aluminium handle 100 mm long bright polished

S&F 25 mm thick Flush shutters for cupboards solid core construction, with block board core, and ply wood face panels, both faces covered with decorative face veneer with lipping to match complete all as specified and as directed by Engineer-in-Charge.

S&F second class hard wo

od Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. Cm each

M&L for welding in repairs n.exc 2.5 cm in length and not exceeding 6mm thick of metal complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated aluminum frames/shutter ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified. .

S & F in repair aluminium glazing clip with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 4.8 mm thick ordinary quality & glazing with rubber gasket in squares n exc 0.5sqm in each pane as in aluminium door/window complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 4.8 mm thick ordinary quality & glazing with rubber gasket in squares exc 0.5sqm in each pane as in aluminium door/window complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminum American handle cast type 200mm for doors all as spfd.

S& F 100 mm long Butt hinges extruded aluminium alloy , with galvanised mild steel hinge pin, anodised, type B-21, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S & F in repair for Aluminium (extruded section body) door closer hydraulically regulated , designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass 4 lever mortice lock, vertical type size 100mm suitble for existing aluminium door complete all as specified and directed by Engineer-in-Charge.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, govering pivot made of brass other parts made of mild steel heavy duty and fixed

Supply and laying of CPVC pipes (outer dia 20 mm) SDR 13.5 pipes & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed by Engr In Charge

Supply and laying of CPVC pipes (outer dia 25 mm) SDR 13.5 pipes & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed by Engr In Charge

M&L for Jodhpur stone of roof slab self faced 7.5 cm to 10 cm thick 25 to 35 cm wide hoisted and set jointed and grouted in cement and sand mortar 1:6 comp.all as specified.

M&L Sand stone slab 25-35mm thick as in chajjas, sunshade , man holes covers ,plateform etc. n exc 2 m in length punched dressed on face and along exposed edges,self faced on other side and set in cement mortar 1:4 incl.making chases in wall.

Demolition of reinforced cement concrete to any thickness as in slabs, beams incl cutting of reinforcement as reqd at site.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone agg. ,50mm thick as in floors over stone patti roof slab finished the surface even and fair without using extra cement comp.all as specified.

S&F in repair 20 mm dia of ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (minimum weight 20mm-210 gms) complete all as specified.

S&F in repairs,stop /gate valve with butterfly handle ,screwed both ends for iron pipe of dia 20 mm complete all as specified and directed,all as specified & directed. ISI Marked

S&F vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Jaquar (Cat Part No -OPS-WHT-15953 BIUFPM or equivalent out of makes specified in list of makes as approved by GE

S&F in repairs vitreous China pedestal pattern white,(excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed by Engr In Charge

S&F in repair concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified. Make : Jaquar (Concealed Cistern-JCS-WHT-2400 FS, Flush Plate-JCP-CHR-812415) or equivalent out of makes specified in list of makes as approved by GE

S&F in repairs vitreous china premium/ 1st quality Table top WHB ,white/ivory/off white including all accessories as recommended by manufacturer and incl brass CP bottle trap 32 mm with inlet ane outlet screwed for pipe or connections incl all necessary accessories for fixing,packing,union and incl 32 mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instruction complete all as spf and directed. Make: Jaquar (Cat Part No JDS-WHT-25907N ) or equivalent out of makes specified in list of makes as approved by GE

S & F in repair Viterous China urinal half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; white including CP spreader, waste pipe etc.

S&F in repair Single lever central Hole Basin Mixer CP brass 15 mm bore dia with letter marked for cold and hot complete all as spfd and directed. Make : Jaquarn(Cat Part No - OPP CHR 15005 BPM) or equivalent out of makes specified in list of makes as approved by GE

S&F in repair chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm

S&F in repair fancy type chromium plated stop valve/Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified. Make : Jaquar (ALD-573) or equivalent out of makes specified in list of makes as approved by GE

S&F in repair CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flangess complete.

S&F in repair Towel ring of cast copper alloy chromium plated fixed and repair as app by Eng-in-Charge.

S&F in repair CP Brass towel rack complete all as specified and directed.

S&F in repair CP Brass liquid soap dispenser complete all as specified and directed.

S&F two way angle cock of cast copper alloy chromium plated fixed and repair as app by Eng-in-Charge.

S&F in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repair 32 mm size CP waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Earthing complete with galvanised steel pipe electrode, 32mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 6mm dia galvanised iron or steel wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

S&F Corner Glass shelf fancy type, toughned glass, with CP bracket and guard railing, fixed along wall with CP brass screws and PVC plug complete all as specified and as directed.

S&F 75 mm bore uPVC pipes grade 'B' , single socketed in any length with rubber ring joints , laid in floor or fixed along walls with and including suitable size clamps/brackets (interval

of 1m and pipe keeping 100mm away from wall) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant including UPVC bend/tees of any radious for 75mm bore with access door, 75mm bore Junction( double T/socket) equal or unequal, reducer 75 mm to 50mm and 75mm bore vent cowl complete complete all as specified and as directed by Engr-in-Charge. Note : Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with jotbdip zinc alumnium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. Note : uPVC pipe and fitting / Fixture - (i) The testing for leakage of pipe shall be done before connecting the pipes (ii) All pipes shall be minimum 4" away from walls fixed with GI brackkets (iii) The gully trap shall be minimum 90 cm away from wall (iv) Seperate pipes for for each floor should be provided (v) Sewage and drain system shall be seperate.

M&L uPVC multifloor trap 75/100 mm dia and 600 mm long with grating including jointing with solvent cement in repair .

M&L uPVC gully trap 75/100 mm dia including jointing with solvent cement in repair .

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

M&L for for complete removal of existing treatment on walls etc, by scraping, sand papering or by using mechanical sander and preparing plastered surfaces and applying two coat of acrylic distemper/OBD of approved tint over avg 2 mm thick wall care putty on walls complete as specified and as directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of priming with chalk whitning and applying two coats of acrylic distemper/OBD paint of approved tint over avg 2 mm thick wall care putty over new plastered surfaces etc all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old surfaces plastered or unplastered by mechanical sander brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coat of white wash on old decorated surfaces of ceiling include cornices complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of priming with chalk whitning, and applying three coats white wash on ceiling etc all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two or more coat of exterior premium acrylic emulsion paint (weather coat )of approved tint including priming coat of exterior primer over a coat of wall care putty over new plastered surfaces etc all as specified and directed by Engineer-in-Charge.

M&L for for complete removal of existing treatment on walls etc, by scraping, sand papering or by using mechanical sander and applying two or more coat of exterior premium acrylic emulsion paint (weather coat )of approved tint including priming coat of exterior primer over a coat of wall care putty all as specified and directed by Engineer-in-Charge.

Dismantling of spall / loose concrete from soffits of RCC slab to any thickness in a controlled manner carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete including cleaning the surfaces by air jet etc. complete all as specified and as directed.

M&L for cleaning existing reinforcement bars with wire brush / rotary wire brush making the surface free from cement skin, loose particles, dirt, etc and applying rust remover ('Rustoff 100' of Sika / '8832 GM' of Pidilite or equivalent of Fosroc / Dr. Fixit) on the rebars and removing the loose rust particles after minimum 24 hours by wire brush, all as per manufacturer’s instructions, complete all as specified and as directed. Note : Mode of measurement shall be affected surface area of column, beam, slab, etc.

S&F hard drawn steel wire fabric, weight not exc 4 Kg per sqm, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, supplied and fixed in reinforcement, complete all as specified & as directed.

M&L for cement based polymer modified anti corrosive rebar coating system ('SikaTop Armatec-108' of Sika or equivalent of Dr. Fixit / Fosroc) to existing reinforcement all as per manufacturer’s instructions, complete all as specified and as directed.

M&L for one layer of 20-25 mm thick concrete {comprises composition 1:2:1 plain cement concrete i.e. one part of cement (43 Gde OPC), two parts of fine aggregate and one part of 10mm and down size trap stone aggregate} mixed with 'Sprayset SL' of Fosroc (or equivalent in Sika / Dr. Fixit) 2.00 to 2.50% by weight of cement and 12.50 to 16.50 litre of water mixed as per manufacturer’s instructions and guniting by pressure nozzle with a delivery capacity of 2.5 Kg per Sqm over column, beam, roof slab, etc, and finish with ceiling /wall plaster of required thickness complete all as specified and as directed.

Excavation in trenches n exc 10 Sqm on plan n exc 1.5 m deep and n exc 1.5 m wide , getting out in any type of soil.

S&F LED light fitting 1X9W/1X10W bulkhead luminares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point.

S&F LED luminare 600 mm x 600 mm ,35/36 watts, 230V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holders &LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

M&L for Concrete 1:3:6 type C2 using 40mm graded aggregateas in bed to 150mm drain pies incl packing under and haunching against the sides of pipes after they are laid and tested for.

M&L for DWCPE pipe 150 mm dia laid in trenches ,Jointing incl testing along with necessary fittings , complete all as per manufactrers instructions including dismantling old pipe of any type complete all as specified and directed by Engineer-in-charge.

M&L Rendering 15mm thick in CM 1:4 to concrete walls or brick masonary walls surfaces and finishes even and smooth w/o usi

ng extra cement

M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work

Per point

Each Set

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down old U/S existing DB SPN 8 way & TPN DB 4 way including MCB/MCCB/Industrial plug socket of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

S&F for factory made single extruded WPC ( Wood polymer composite) solid door /window/ceosetory windows& other Frames/Chowkhat of size 65x100 mm compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N ( Edge),minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete as per direction of Eng In charge .( MS holdfast / lugs dash fastners shall be included in unit rate of item). Note:- For WPC solid door/window frames,minus 5 mm toletance in dimension i.e. depth and width of profile shall be acceptable .Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for factory made single extruded WPC ( Wood polymer composite) solid decorative type flush door shutter of size 35 mm thick compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N ( Edge),minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws ,complete as per direction of Eng In charge . Note:- SS butt hinges and SS screws shall be included in unit rate of item.

One light/fan point (Ceiling Fan/Exhaust Fan) controlled by one switch

One3 pin 5 amps socket on same board.

One3 pin 5 amps socket on Independent board.

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

per conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed by engineer-n-charge.

5. All as per item No 141 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4 Sqmm single core PVC insulated and sheathed multistranded cop

S&F Bell push ,Modular type ,5 amp 230V AC 50 Hz for complete all as specified and as directed by engineer-in-charge.

S&F Modular Telephone socket with 1 M White complete all as specified and as directed by engineer-in-charge.

4. All as per item No 141 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

S&F in repair rotational mouleded polythene water storge tank any colour triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 500 ltr capacity include dismandling old water tank and remove from site.

S&F 110 mm bore uPVC pipes grade 'B' , single socketed in any length with rubber ring joints ,laid in floor or fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant including UPVC bend/tees of any radious for 100mm bore with access door, 100mm Junction( double T/socket equal or unequal, UPVC 100mm bore vent cowls, reducer 110 mm to 50mm complete complete all as specified and as directed by Engr-in-Charge. Note : Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with jotbdip zinc alumnium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. Note : uPVC pipe and fitting / Fixture - (i) The testing for leakage of pipe shall be done before connecting the pipes (ii) All pipes shall be minimum 4" away from walls fixed with GI brackkets (iii) The gully trap shall be minimum 90 cm away from wall (iv) Seperate pipes for for each floor should be provided (v) Sewage and drain system shall be seperate.

S&F Modular TV Coaxial Socket 1 M White complete all as specified and as directed by engineer-in-charge.

Taking down and Refixing LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F LED tube light fitting, 1x 20 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make: Philips-EN021 LED20S PSU CW GR S2/ Crompton Greaves LDDR20-CDL Dazzle Ray/bajaj-BCLAB 20W

S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers , holders , LED lamp suitable for roof ceilling including connecting up with three core flexible copper conductor cable of suitable size.

S&F dimmable touch LED table lamp 6 Watt with 3 level adjustable brightness desk lamp with touch sensor switch , with & including all standard accessories , prewired and connecting up , complete all as specified and as directed.

S&F LED Wall light 12 W , sun/prismatic made up of unbreakable poly carbonate suitable for mounting on wall/surface complete all as specified and directed by Engineer-in-charge.

S&F lamp holder,PVC/Polycarbonate insulated body with back plate suitable for conduit/casing caping fitting ISI marked complete all as specified and directed.

S&F LED Bulb 9W ,operating voltage 220-240 volts , starting time<0.5 s, color temperature -6500K , lumens :min 825 complete all as specified and directed by Engineer-in-charge.

Taking down fan ,sealing cable end ,dismantling blades of any make , any sweep , and refixing after necessary repairing such as winding of motor , replacement of capacitor & ball bearing of ceilling fan , cleaning all dust & painting with existing colour synthetic enamel paint by spraying including filling cavities with filler,one coat including writing MES No. all as specified and directed by Engr-in-charge,.

Supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter ,voltage 230V,50 Hz , RPM1200, Copper winding of sweep 300mm.

S&Fexhaust fan steel body AC single Phase ,230Vof size 300mm sweep ,with blades and frame and louvers

S&F LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-Charge.

S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (m

inimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 16 AMP with valve flange suitable for 15mm bore pipe for water supply connection complete. Make : Havells (Model -Monza EC) Cat part No GHWAMFSWH025/Bajaj Calenta Storage/Crompton Solarium Qube

S & F sheet metal enclosure MCB DB , double door , vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S&F MCCB 63 amps . 4 pole , 415 volts , fixed type breaking capacity 16KA complete all as specified and as directed Engr-in-charge.