REPAIR/REPLACEMENT OF TILING AND ROOF SHEETS FALSE CEILING AND CONNECTED B/R WORKS AT MD ACCN AND OTM ACCN OF VARIOUS UNITS AT SHILLONG UNDER GE SHILLONG

Amount

Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling of asbestos cement (corrugated,semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work)complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for roof truss (framed) trussed, purlin etc of angle or other section for refixing of sheets and similar works complete of Gde Fe-290 (Gde E-165) all as specified and directed.

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified and directed.

S&F 20mm thick 2nd class hard wood boarding in eaves board/fascia or any other boarding horizontal or vertical, plained one side with butt joints fixed with nails complete all as specified and directed.

S&F Solid PVC Wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 10mm thick/insulated PVC Wall panelling with EPS struck to 7mm plain colour PVC sheet, suitably fixing/placed at site on walls/false ceiling including grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm all as specified and directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L Dark shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, dados, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in cm 1:6 complete all as specified and as directed.

M &L for prepairing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old decoated wall surface and applying one coat of oil emulsion distemper complete all as specified and as directed.

M&L for applying plaster of paris putty of 1 mm thickness over plastered surface to obtain smooth surface complete all as specified and as directed.

M&L preparation of old painted surfaces of wood any description not otherwise descri-bed, over 10cm width or girth two coat of synthetic enamel complete all as specified and as directed.

M&L preparation of old painted surfaces of wood surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel (ordinary tint) incl scrubbing, washing, rubbing down and stopping complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L preparation of new surfaces of wood surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint two coat of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote oil complete all as specified and as directed.

S K Construction (BID ID -3315765)

MS HO Shadap (BID ID -3315781)

M/S U.K ENTERPRISE (BID ID -3316268)

M/s SS Engineering (BID ID -3316136)

M/S Surendra Prasad and Associates (BID ID -3316264)

M/S Thapa Construction (BID ID -3316263)

M/s. V M ENTERPRISE (BID ID -3316243)