GE/W/LKO/17 OF 2021-22

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L in repair brick work with old size subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

S&F in repair suspended false ceiling with 4mm thick 'E' Board (Make: Everest) of size 600x600mm, white, of approved texture and GI frame work complete all as specified and directed including all necessary drilling, cutting to fix electrical items as under with the following:- (a) 38x24x0.40mm thick main runner (b) 28x24x0.30mm thick GI tee as main and cross runners (c) 24x24x0.3mm wall angle suspended with 4mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab etc. placed @ 600mm c/c from perimeter of wall. (d) Fixing of 4mm thick 'E' board tiles and finished complete with two coats of synthetic enamel paint over a coat of primer on ceiling complete all as specified and directed. NOTE: The complete ceiling work shall be executed as per manufacturer's instructions and as directed.

S&F in repair 4mm thick 'E' Board (Make: Everest) of size 600x600mm, white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture including all necessary drilling, cutting to fix electrical items complete all as specified and directed.

S&F in repair Gypsum board 600x 600mm and 12mm thick (textured finish), white prelaminated sett embossed reinforced designer ceiling board tiles of approved textureat all height on hot dip structural soffits by approved hangers at 1200mm centre to centre. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, screws etc. The last hanger at the end iof each amin runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runner at 600mm center to center to from 600x600 mm modules cross tee longer than 600mm to be supported independently. 600x600mm moduleesfromed by gitting 600mm long tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be 0.45mm hick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer instructions complete all as specified and directed

Dismantling of Asbestos cement (corrugated, semicorrugated etc.) sheets in roof coverings complete all as specified and directed.

M&L 6mm thick Asbestos cement corrugated or semi corrugated sheets in roofs, walls etc. and fixed with L-type or J-type or cranked hook bolts with washer complete all as specified and directed.

M&L 6mm thick Asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets in roofs, walls etc. and fixed with L-type or J-type or cranked hook bolts with washer complete all as specified and directed. NOTE: Two piece adjustable ridges shall be measured as one length.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and fair complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of white wash on old decorated plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished surface even and smooth without using extra cement complete all as specified and directed.

S&F 3mm thick and 38mm wide glass deviding strips, inserted in position, conform to design complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels, finished surface even and smooth without using extra cement and forming 12mm wide expansion joints to the full depth, and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free glazed ceramic tiles, coloured, superior quality of size 300x450x7mm/450x350x7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 finishing the surface even and rough complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured digital glossy, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in vertical surfaces etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F in repair 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 25mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 250 litres and not exc. 500 litres of any type and in any position complete all as specified and directed.

S&F in repair PVC cover with locking arrangement suitable for PVC water tank of capacity 500/1000 litres complete all as specified and directed.

S&F in repair 500 litres capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 15mm bore pipe (Min weight 142gms) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 25mm bore pipe (Min weight 455gms) complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, white seat cover closed pattern including connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated or aluminium hinging device ISI marked as approved complete all as specified and directed.

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, low level, flushing cistern of 10 lit capacity, white, with inlet, ball valve, float valve and handle including bracket, rubber cone and flush pipe etc. and connection to pipes complete all as specified and directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed.

S&F in repair angle valves 15mm bore, half/quarter turn, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore PVC connections, superior quality, with CP brass nuts of length 450mm complete all as specified and directed.

S&F in repair stop valves concealed type 15mm bore, half/quarter turn, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair brass CP central hole basin mixer, fancy type with round spout and popup waste system including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair brass CP wall mixer with over head shower arrangement with arm and long bend pipe, connecting legs and wall flanges, fancy type with costed swinging spout including plugging and securing to walls suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwd for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair brass chromium plated overhead shower rose with arms, 125mm size, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed.

S&F in repair soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrom finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F PVC bath cabinet/ mirror cabinet (multi utility) with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed. Make: Commander/ Polytuff/ Prayag

S&F in repair stainless steel grating doom, 100mm dia, superior quality and fixed complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe, superior quality, ISI marked for WHB or sink and fixed complete all as specified and directed.

S&F in repair brass spindle with washer for fancy type bib tap or stop valve etc. suitable for 15mm bore and fixed complete all as specified and directed.

S&F in repair brass spindle with washer for bib tap or stop valve etc. suitable for 15mm bore and fixed complete all as specified and directed.

S&F in repair brass spindle with washer for concealed stop valve suitable for 15mm bore and fixed complete all as specified and directed.

S&F in repair PVC syphon kit complete with fittings, ISI marked, suitable for PVC low level flushing cistern and fixed complete all as specified and directed.

S&F in repair 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, jointed with cement laid in trenches or in floors complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under respective item.

S&F in repair 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, jointed with cement laid in trenches or in floors complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under respective item.

S&F in repair 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, jointed with cement, fixed to walls with MS clamp complete all as specified and directed.

S&F in repair 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, jointed with cement, fixed to walls with MS clamp complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius) with oval acess door, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius) with oval acess door, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair cast iron vent cowls suitable for 75mm bore pipes complete all as specified and directed.

S&F in repair cast iron floor trap, with grating including jointing to waste pipes, fixed in cement concrete 1:2:4 type B-1 and suitable for 100mm bore pipe complete all as specified and directed.

S&F in repair cast iron floor trap, with grating including jointing to waste pipes, fixed in cement concrete 1:2:4 type B-1 and suitable for 75mm bore pipe complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F in repair 16mm outside dia PE-AL-PE (Polyethylene Aluminium Polyethylene) composite pressure pipes crimp type and fixed to wall, ceiling or laid in floors complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair 32mm outside dia PE-AL-PE (Polyethylene Aluminium Polyethylene) composite pressure pipes crimp type and fixed to wall, ceiling or laid in floors complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair PE-AL-PE composite female tee of size 12x16mm and fixed complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair PE-AL-PE composite tee of size 32x25x20mm and fixed complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair PE-AL-PE composite tee of size 32x25x16mm and fixed complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair PE-AL-PE composite tee of size 32x32x32mm and fixed complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair PE-AL-PE composite coupler/ union of size 12x16mm and fixed complete all as specified and directed. Make: Nexgen or as approved.

S&F in repair PE-AL-PE composite elbow of size 12x16mm and fixed complete all as specified and directed. Make: Nexgen or as approved.

M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashing and junction of parapets, etc., and surface painting with a layer of hot blown bitmen of any penetration applied hot @ 1.7 kg per sqm blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L for cleaning all around at the mouth of existing rain water pipe properly at terrace, wetting and grouting with CM 1:4 and mixed with 3% water proofing compound, area of each grouting n. exc. 0.10 sqm complete all as specified and directed.

M&L for repairing of cracks by cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 3% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: (i) WPC shall be measured and paid seperately. (ii) Wherever PCC padding shall be provided, screed bed shall not be provided.

M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall be measured and paid seperately. (ii) Wherever screed bed shall be provided, PCC padding shall not be provided.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for machine pressed chequerred cement concrete tiles of size 300x300x20mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M & L for preparation of surface of wall/chajja and applying a coat of Tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P151, two part of cement by weight complete all as specified and directed

M&L for cleaning the exposed concrete surface of floor/ wall/ chajja by brushing & watering and applying one coat of TAPECRETE P-151 Acrylic Polymer Modified Cementitious slurry consisting 1:2 (1 part of tapecrete : 2 parts of cement by weight) and shall be allowed to dry for 4-6 hours, then applying second coat of 1.5mm thick tapecrete brush topping consisting 1:2:2 (1 part of tapecrete : 2 parts of cement : 2 parts of silica sand by weight) over the first coat and cured for next 2 days complete all as specified and directed.

M/S S&R Construction

M/S Reliance Construction

M/S Chandra Mohan and Sons