Providing Bus Washing Machine Platform In Valparai Branch.

Earth work for depositing the earth work , leveling Branch yard portion clearing using JCB as directed by the departmental officers including hire and fuel charges and driver batta Etc complete.

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over country wood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

CEMENT CONCRETE 1:5:10 (One cement, five sand and ten aggregate) using 40mm gauge hard granite stone jelly for FLOORING & BASEMENT including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.

PLAIN CEMENT CONCRETE 1:2:4 (One cement, two M-sand and four aggregate) using 20mm gauge hand broken hard granite stone jelly for FLOORING & BASEMENT laid in layers of not more than 15cm thick, well rammed watered, curing ,etc., complete complying with standard specification.

Supplying, fabricating and placing in position Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, etc complete complying with standard specification.

Reinforced CEMENT CONCRETE 1:2:4 (One cement two sand and four aggregate) using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, necessary grouting complete complying with standard specification and as directed by the departmental officers.

Plastering the exposed surface of RCC with cement mortar 1:3 (One cement and Three Sand ) 10 mm thick in all floors and curing finishing etc complete complying with standard specification.

Supplying of 2000 Liters Capacity sintex tank as per standard Specification for corporation officers etc., complete