Repair/ Replacement of Old FTL / MH / SV street light fittings to smart LED / Solar light fitting of JK Road Md Accn / KK Range / BTR /AE Regt area under GE(N) Ahmednagar

Amount

Excavating in trenches n exc 1.5 mtr wide and n exc 1.5m in depth , for foundation ,etc or for shafts, wells , cesspits, main holes etc.n exc 10 sqm on plan and n exc 1.5 mtr depth and getting out on soft/ lose soil etc complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading , levelling , watering and well ramming in layers not exc 25cm of any soil etc complete all as specified and directed by Engineer-in-Charge.

Supply and Lay HDPE pipe 63 mm dia for laying of LT cables etc complete with all accessores all as specified and directed. Make: Vectus Industries/ Supreme/Infra/Astron Plastic etc complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials(soils) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point etc complete all as specified and directed by Engineer-in-Charge.

Material and labour in replacement of 25 mm dia GI Pipe light grade ISI Marked with all fittings laid in trenches , fixed to walls / poles with FI Clamps of size 40x5 mm etc complete all as specified and directed by Engineer-in-Charge.

Dismantling carefully the existing unserviceable LT overhead line ACSR of any size from its position by necessary disconnecting of conductor and removing etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of unserviceable existing cross arms made from channels, angles and unserviceable FI clamps, nuts, bolts etc from OH line and removing etc complete all as specified and directed by Engineer-in-Charge.

Taking out existing unserviceable UG Cable of following sizes by disconnecting of connections etc complete all as specified and directed by Engineer-in-Charge.

(a) 10 Sqmm 2 Core

(b) 10 Sqmm 4 Core

(c ) 16 sqmm 4 Core

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG cable 1100 Volts, heavy duty XLPE insulated, screened, PVC bedded, galvanised steel strip or wired armoured with aluminium conductor following size etc complete all as specified and directed by Engineer-in-Charge.:-

(a) 10 Sqmm 2 Core

(b) 10 Sqmm 4 Core

(c ) 16 sqmm 4 Core

Supply and replacement of 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension GI wire, twin core cable, flat or circular with size 4sqmm etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 16 (here--n-before) but 6 Sqmm two Core

All as per Item No 16 (here--n-before) but 10 sqmm 2 Core

Material and labour in replacement of 40mm dia GI Pipe light grade ISI Marked with all fittings laid in trenches , fixed to walls / poles with etc complete all as specified and directed by Engineer-in-Charge

M & L for steel tubular poles, swan neck type ,modular or design approved by engr in charge complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 Mtrs Long) including taking down existing pole etc complete all as specified and directed by Engineer-in-Charge.

M & L for PCC(1:3:6) type C-2 using 40mm grade stone aggregates as in foundation of pole and similar work etc complete all as specified and directed by Engineer-in-Charge.

M & L for PCC(1:2:4) type C-2 using 40mm grade stone aggregates for coping and similar work etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing FRLS PVC insulated cables aluminium conductor, stranded 4 Sqmm 2 Core, etc complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking down carefully the defective Highmast light fittings from high mast pole by mechanically/ manually and removing the unseviceable light fitting from pole and supply and fixing led flood light 200 watt,lumen 20000 with 10 KV surge protection in built and reassembling the same pole , and refixing at its original location , including reconnections with suitable length and size of capper/Aluminium wire as per existing and testing / commissioning etc complete all as specified and directed by Engineer-in-Charge. Cat Part No BJFL200W or equivalent in list of makes in Appendix `C'

Lifting the Highmast pole 16 mtr height by crane from its original location with opening the nut bolt and washers , greasing the steel wire rope and fixing with pulley and reassembling and refixing at its orginal location, including reconnections and testing commissioning complete for smooth operations etc complete all as specified and directed by Engineer-in-Charge. Note: (i) Quoted rates include labour and crane charges. (ii) Cost of sundry items like grease, cotton waste, nut, bolt and washers are deemed to be included quoted rates.

Supply only three pole contactor coil suitable for L&T contactor,240V,50 Hz etc complete all as specified and directed by Engineer-in-Charge. cat part No CS94980/CS94105 of L&T or as per existing on site.

Supply only three pole contactor L&T contactor,32/40 Amps,240V,50 Hz or as per existing on site etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing isolater 32/40 Amps,240 volt, three pole etc complete all as specified and directed by Engineer-in-Charge.

M & L for painting of Street light poles (SWAN NECK) with two coats of aluminium paint and one coat of red oxide as primer including writing of pole Nos etc complete all as specified and directed by Engineer-in-Charge.

M & L for painting of Street light poles tubular type 9 mtr long with two coats of aluminium paint over one coat of red oxide as primer after preparing the surface including writing of pole Nos etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of MCB TPN, 63 Amps 10 KA breaking / rupturing capacity capacity 415 volt , 50 HZ conforming to IS 60898-1 including necessary connection with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge. MAKE: CAT No DSMSCTNFO63 OF Standard or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fix in replacement of LED post top lantern 40 Watt, with spun aluminium canopy & die cast aluminium spigot with opal PMMA acrylic diffuser pre wired with all accessories including making necessary connections and make it functional etc complete all as specified and directed by Engineer-in-Charge. . Make : Crompton cat Part No- LPTO-40-CDL or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fix in replacement of timer switch analog FM/1 quartz, 240volt, 50/60 Hz 16 amp/250VAC resistive etc complete all as specified and directed by Engineer-in-Charge. Make L&T of cat part No-J648B or equivalent makes mentioned in list of makes in Appendix `C'

Supply, fix in replacement of Contactor 3 pole AC -1 40 Amps Main Pole Confugration 2 No 2 NC 415 volt fixing with Existing Box by suitable size of copper cable with suitable size of lugs etc complete all as specified and directed by Engineer-in-Charge.. make L&T Cat Part No-SS90701 or equivalent makes mentioned in list of makes in Appendix `C'

S&F Shock Proof, Rust Proof, Fire Retradrant, Non-transparent Kiosks Pole Box of size 310x210x120mm made of Engineering Plastic on Piece moulding for Outdoor type, Heavy duty with 4 No. insulated Alunminium Bus-bar of 60 Amp capacity, mounted on Unbreakable Insulators MCB SP, 10 Amp, complete with Aluminium Lugs of suitable size upto 50 Sqmm including 2 No. Flat Iron 40x3mm Clamps with suitable size Mild Steel Bolts, Nuts & Washers, etc. and duly Painted on Both Sides with Two Coats of Synthetic Enemel Paint over a Coat of Red Oxide Zinc Chrome Primer including Taking down Unserviceable Pole Box of any description from any Height, etc complete all as specified and directed by Engineer-in-Charge.

M & L for replcement of Chain sprocket in Highmast Light etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of brass batten holder for fixing of gate light etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of Triple pole and Neutral HRC type rewireable Swich fuse unit 63 Amp 415 volt AC 23 A 50 HZ conforming to IS 60947 1 & 3 fixing on Street light Pole with 32x4mm of MS Clamp and suitable size of nut, bolt and washers etc complete all as specified and directed by Engineer-in-Charge.. Cat Part No-#DTPN063 of Indoasian or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing with replacement of MCB SP 6 to 32 Amps with PVC Enclouser fixing with pole or wall for individual street light/ security light control with suitable size of clamp nut , bolt and washers etc complete all as specified and directed by Engineer-in-Charge. make stanard, cat part No-DSMSCSPF006-032 or equivalent makes mentioned in list of makes in Appendix `C' Note: Rate of MS Clamp is include in Quoted Rates.

M&L for bracket (for street light fitting) made out from GI Pipe 50 mm Bore (dia), Light Grade, not exc. 1.20 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 40x5mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works incuding taking down existing etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for street light control board / box of size 0.50 X 0.50 X 0.20 m made out of 1.60 mm thick MS sheet fixed / mounted on pole by means of 2 Nos of FT clamps of size 25 X 3 mm comprising the following enclousers and connecting with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge.:- a) MCB, TPN, 40 Amps, - 01 No MAKE: CAT No DSMSCTNF040 OF STANDARD or equivant makes mentioned in list of makes in Appendix `C' b) Timer switch, eletronic, ET 100 operating on 110 / 240 / 415 Volts, 50 Hz MAKE: CAT No SE92006 OF L&T or equivant makes mentioned in list of makes in Appendix `C' c) Contactor ML 2, 32 Amps,415 Volt - 01 No MAKE: CAT No SS90701 OF L&T or equivant makes mentioned in list of makes in Appendix `C'

Material and labour for street light control board / box of size 0.50 X 0.50 X 0.20 m made out of 1.60 mm thick MS sheet fixed / mounted on pole by means of 2 Nos of FT clamps of size 25 X 3 mm comprising the following enclousers and connecting with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge.:- a) MCB, TPN, 40 Amps, - 01 No MAKE: CAT No DSMSCTNF040 OF STANDARD or equivant makes mentioned in list of makes in Appendix `C' b) Timer switch, eletronic, ET 100 operating on 110 / 240 / 415 Volts, 50 Hz MAKE: CAT No SE92006 OF L&T or equivant makes mentioned in list of makes in Appendix `C' c) Contactor ML 2, 32 Amps,415 Volt - 01 No MAKE: CAT No SS90701 OF L&T or equivant makes mentioned in list of makes in Appendix `C'

Taking out Old existing security light (HPSV/Tube light fitting) and fixing of LED street light, 45 Watt fixed with suitable size of GI Bracket,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box etc complete all as specified and directed by Engineer-in-Charge. Note : Street light 45 Watt will be issued under Sch 'B' freee for fixing.

Taking out Old existing security light (HPSV/Tube light fitting) and fixing of LED street light, 90 Watt fixed with suitable size of GI Bracket,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box etc complete all as specified and directed by Engineer-in-Charge. Note : Street light 90 Watt will be issued under Sch 'B' freee for fixing.

Taking out Old existing security light (HPSV/Tube light fitting) and fixing of LED street light, 70 Watt fixed with suitable size of GI Bracket,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box etc complete all as specified and directed by Engineer-in-Charge. Note : Street light 70 Watt will be issued under Sch 'B' freee for fixing.

Taking out Old existing security light (HPSV/Tube light fitting) and fixing of LED street light, 60 Watt fixed with suitable size of GI Bracket,Clamp,Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box etc complete all as specified and directed by Engineer-in-Charge. Note : Street light 60 Watt will be issued under Sch 'B' freee for fixing.

Supply only in replacemet LED Drivers for 25 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED surg protectors for 25 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED Drivers for 30 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED surg protectors for 30 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED Drivers for 60/65 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED surg protectors for 45/60 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED Drivers for 70/75 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED Drivers for 120 watt LED flood light Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED surg protectors for 120 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED surg protectors for 200 watt LED Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacemet LED Drivers for 200 watt LED flood light Fittings any type and any make as per sample etc complete all as specified and directed by Engineer-in-Charge.

Supply , fixing and testing Solar LED street light fitting complete having solar photo voltaic module 100 x 2 Wp system where 45 Watts LED lamp operates for stipulated time everyday without any human intervention work on auto electronic controller, including providing Battery 24 V, 120 Ah (Tubular plate Lead Acid battery) and electronic system with tamper proof MS box with corrosion resistance paint suitable for battery , bend pipe and camps suitable for mounting lamps fixtures complete including providing tubulor GI pole 20 feet designed to specifycally for Solar light fitting including PCC work , foundation, earth work including suitable size of cable etc complete all as specified and directed by Engineer-in-Charge.. Make-Havells, Modal No 45W Solar SLS,HSN Code.8541 or equivant makes mentioned in list of makes in Appendix `C'

M & L for repairing of Highmast panel box by replacing of MCB TPN, Timer switch, Contactor and also repairing the Panel box by welding of hinges, replacement of Lock etc complete all as specified and directed by Engineer-in-Charge. Note: (i) MCB TPN, Timerswitch and Contactor shall be measured and paid separately. (ii) Rate Includes cost of welding,Lock and keys , Painting in two coats of synthetic enamail and one coat of primer red oxide,

Supply and fix in replacement of MS Clamp 25x3mm with nut bolts and washers duely painted in two coats of aluminium paint and one coat of red oxide etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of copper conductor XLPE insulated stranded , unarmoured ,extructed PVC type ST2 sheathed , 650/1100 volt graded as per IS 7098.of size 6 Sqmm 4 Core etc complete all as specified and directed by Engineer-in-Charge..

Supply and fix in replacement of steel wire rope Grade AISI 316, 7/19 with 6mm dia etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of copper conductor PVC insulated stranded , unarmoured , 650/1100 volt graded as per IS 7098.of size 4 Sqmm 5 Core . etc complete all as specified and directed by Engineer-in-Charge.

M & L for replcement of Chain sprocket in Highmast Light etc complete all as specified and directed by Engineer-in-Charge.

An amount of Rs 69,026.00 shall be deducted from BOQ on account of schedule of credit

vedant engineering enterprises

AZAD SERVICES

metro electrical services

Maruti Abhiyantriki

BHAVIN INFRA