Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹88.5 LAccepted-AOC 1ST FLOOR SIDHARTH TOWER BALTI KHARKHANA BYELNE S J ROAD ATHGAON GUWAHATI KAMRUP ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹94.0 L+₹4.5 L (4.99%)Rejected-Finance VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L2 | Rejected-Finance OTHER TNAN L1 BIDDER | |
| 3 | L3₹95.5 L+₹6.0 L (6.69%)Rejected-Finance VILL RAJARCHAK PO HALDIA PORT DISTT PURBA MEDINIPUR WB PIN 721605 | MEDINIPUR EAST | WEST BENGAL | 721605 | L3 | Rejected-Finance OTHER TNAN L1 BIDDER | |
| 4 | Rejected-Technical | - | Rejected-Technical WORK LOAD IN HAND IS MORE THAN 5 TIME TO TENDERING LIMIT |
Tender Value
₹85 L
EMD Value
₹1.5 L
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (CGN) kolkata
GE (I) (Coast Guard Navy) Military Engineer Services Damodar Complex Naval Transit Accommodation Hastings, Kolkata 700 023
SPL REPAIR TO P-37 BLDG (COMSTAN FACILITIES) AND P-08 BLDG (SINGLE LIVING SUBORDINATE OFFICERS INCLUDING SHIP GALLEY, DINING HALL AND PASSAGE) AT HALDIA UNDER GE (I) (CGN) KOLKATA
2022_MES_522761_2
8012/B/E8
Open Tender
Civil Works
Item Rate
270 days
HALDIA
AS PER TENDER DOCUMENT
11 documents required · 11 mandatory
₹1,000
GE (CGN) kolkata
₹1.5 L
Yes
7 Nov 2022
4 Jul 2022
26 Jul 2022
4 Jul 2022
25 Jul 2022
11 Jul 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)and removing unserviceable material outside cantt area complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceble material out side cantt area complete all as specified and as directed.
Demolition of re-inenforce cement concrete in roofs, floors (other than ground loors), beams, staircases, landing, chajjas and removing unserviceable material out side cantt area complete all as specified and as directed.
Demolition of Brickwork built in cement mortar incl. all quoins ,arches, pillars etc and removing debrish out side cantt area complete all as specified and as directed.
Dismantling boarding any drscription, fixed in any position with nails /screw complete all as specified and as directed.
M&L for anodised aluminium snap grid frame work for ceiling size of grid 605mmX605mm under gypsum board 12mm thick fixed with screws complete all as specified and as directed.
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.
S & F 12 mm thick perforated particle boards or tiles for insulation and acoustic purposes, 60 cm X 60 cm in size fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed.
S&F 12mm thk Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)all as specified as directed.
S&F Hanger 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slab by mean of ceiling cleat made out GI flat 40x3mm size 60mm long complete all as specified and as directed.
S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.
M&L Mild steel 10 mm dia and over TMT bar cut to length, bent to shape as required including binding, cranking and hooking ends and binding with and including mild steel wire n exc 0.9mm dia or securing with clip complete all as specified and as directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed
Supply and fix solid PVC door frames of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube all as per specification & drawing complete all as specified and directed by Engineer in charge.
S & F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail panelling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification and drawing in SSR 2010 part-II on page 156 complete all as specified.
S&F 75mm long but hinges, medium wt, cold rolled mild steel all as specified and as directed
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge
Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)
S&F anodised aluminium grill, 10mm thick, diamond shape with apareture 75mm fixed to windows complete all as specified and as directed. Make - Deco Grill, model DG-104 or equivalent in / Jindal/ Hindal
Supply & fix sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with beads in square exceeding 0.5 Sqm in each pane complete all as specified and directed..
Supply & fix sheet glass, ordinary quality, ground or obscured or frosted, 5.5 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
M & L for powder coated aluminium frame for doors, windows, ventilators (thickness of powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F Powder Coating Anodised aluminium door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
M&L for 2nd class hard wood ,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S&F for 30mm thk flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
S&F for 19mm thk Block board, grade 2 quality, interior grade, commercial type decorative type, both faces complete all as specified and directed.
S&F for 12 mm thk Veneered decorative ply wood,grade I (with BWR resin) decorative veneers on one face only including all fitting fixture fixed on wall surfaces complete all as specified and directed.
S & F 1 mm thick, type S (Standard type), wear index No. 3, Impact Index No. 2, Scratch Index No. 3, one side decorative, laminate as per IS 2046: 1995 of surfaces finish, colour and pattern as per approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-charge.
S&F for 6mm thk Cover fillets of tempered hard board, 40mm wide and fixing with screws complete all as specified and directed.
M&L PCC 1:3:6 type C1 (using 20mm graded stone agg) as in bed block for embeded hold fast for doors, window frames or chowkats including necessary form work complete all as specified.
M & L for non skid, rectified, colour ceramic floor tiles (group B II), 400 mm X 400 mm X 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:6) set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and as directed.
M & L for non skid, rectified, colour ceramic floor tiles (group B II), 600 mm X 600 mm X 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:6) set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and as directed.
M&L Dark shed Vitrified ceramic tiles 10mm thick polished area of each tiles n exc 0.36 Sqm in floors jointed in neat cement slurry and pointed white or coloured cement to match complete all as specified and as directed.
M & L for non skid, rectified, white ceramic floor tiles (group B II), 600 mm X 600 mm X 10 mm thick on floor including 10 mm thick backing coat in cement mortar (1:6), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed.
M & L for glazed, colour ceramic wall tiles (group B III), 450 mm X 300 mm X 8 mm thick as in skirting, dado, set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed.
M&L for rendering 10 mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth with out using extra cement all as specified.
M & L for 20 mm thick granite (pure black) (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L 25 mm thick PCC 1:2:4 type B-0 using (12.50 mm graded stone aggregates )as in floor finished even and rough.
M&L for repair to Chajjas/Facias n exc 1.0 sqm area upto 4 storey building including necessary formwork & scafolding, plaster on top, side and soffits of chajjas/facias wherever damaged, RCC 1:2:4 type B1 reinforced duly welded if required and necessary surface finished as per existing complete all as specified.
M&L for repair to Chajjas/Facias exc 1.0 sqm area upto 4 storey building including necessary formwork & scafolding, plaster on top, side and soffits of chajjas/facias wherever damaged, RCC 1:2:4 type B1 reinforced duly welded if required and necessary surface finished as per existing complete all as specified.
Taking down GI tubing of 15 mm dia and connections incl. cleaning for refixing or removing from site complte all as specified.
Taking down GI tubing of 20 mm dia and connections incl. cleaning for refixing or removing from site complte all as specified.
Taking down GI tubing of 25 mm dia and connections incl. cleaning for refixing or removing from site complte all as specified.
S&F 15 mm dia galvanised pipes' medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complte all as specified.
Refixing only 15mm dia tubing and connections in new or old position including cleaning old tubing complte all as specified.
S&F 20 mm dia galvanised pipes 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complte all as specified.
Refixing only 20mm dia tubing and connections in new or old position including cleaning old tubing complte all as specified.
S&F 25 mm dia galvanised pipes 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complte all as specified.
Refixing only 25 mm dia tubing and connections in new or old position including cleaning old tubing complte all as specified.
Cutting chases in brick walls to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., exceeding 10 cm but not exceeding 20 cm girth and making good the same with cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate or cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 complete all as specified and as directed.
Demolition of existing RCC water storage tank of capacity exc.1000 ltr but n exc. 2000 ltr and removing out side cantt area complete all as specified and as directed.
M&L 75 mm thick PCC 1:3:6 type C-2 (20 mm graded stone agg) as in plinth protection finished even and fair.
M&L cement concrete type B1 1:2:4 (20 mm graded agg) as in lintels upto 1.50 m clear span, cills, steps, plinth courses and like including weathering slightly rounded or chamfered as directed.
S&F in repair vitreous china wash basin white,flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site and all as directed by Engr-in- charge.
S&F in repair Brass CP Mixer for mixing hold & cold fancy type extra heavy duty chromium plated for WHB suitable for 15mm bore pipe,screwed down for iron pipe with complete all as spd and directed.
S & F in repair Angle / Stop Valve cast copper alloy fancy type15 mm dia bore with capstan handle screwed down screwed for iron pipe or for brass ferrule fixed in repairs.
S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including connection to GI pipe line complete all as directed.
S&F in repair PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long, fancy type chromium plated angle valve of 15mm bore dia complete all as spfd.
S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc.incl. making good to floor as existing complete all as specified and directed by Engr-in-Charge.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-charge.
S&F Steel Peg Set of size (450x50mm) including four aluminium hooks all as specified and directed.
S&F in repair tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated.
S&F in repair stainless steel gratings of outer frame dia 125 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.
S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.
S&F in repair Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified.
S&F in repair swan neck bib cock cast copper alloy with capstan head, chromium plated fency type, with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore complete all as specified.
S&F in repair 100 mm dia cast iron bends any radius diminishing pieces or tapers(larger bore measured) fitted with oval access door.
S&F in repair cast iron 100 mm dia bore pipe,branch pieces,single (equal or unequal),ordinary or inverted(spigot or socket type) or with parallel branches.
S&F in repair 100 mm dia cast iron soil, waste and vent pipes,( sand cast pipes ) in any length with or without ears, with cement joints, laid in trenches or in floors.
S&F in repair 75 mm dia cast iron bends any radius diminishing pieces or tapers(larger bore measured) fitted with oval access door.
S&F in repair cast iron 75 mm dia bore pipe,branch pieces,single (equal or unequal),ordinary or inverted(spigot or socket type) or with parallel branches.
S & F in repair 75 mm dia cast iron soil, waste and vent pipes,( sand cast pipes ) in any length with or without ears, with cement joints,,fixed to walls.
S & F in repair 110 mm dia PVC (SWR) Pipes double socketed in any length with rubber ring joints fixed to walls with MS clamps complete all as specified and directed by Engineer-in-charge.
S&F for PVC (SWR) bends any radius fixed to walls with MS clamps complete all as specified and directed by Engineer-in-charge
S&F for PVC (SWR) vent cowl fixed to walls with MS clamps complete all as specified and directed by Engineer-in-charge
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and as directed.
M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as specified.
M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces finished even and smooth without using extra cement as in ceiling complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth with out using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/concrete surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces) complete all as specified and as directed.
Supply only Liquid water proofing compound.
Preparation of surfaces new plastered surfaces & applying two coat of oil bound distemper over a coat of alkali resistant priming paint over two coat of putty minimum 3 mm thick on ceiling complete all as specified as directed.
Preparation of new plastered wall surfaces & applying two coats of oil emulsion over a coat of alkali resistant priming on over two coat of putty minimum 3 mm thick on plastered surface preparatory to oil emulsion.
Material & Labour for applying on new wall surfaces Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
Material & Labour for applying on old wall surfaces, Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
M & L complete removal of existing treatment for preparation of old decorated surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spotsan applying two coat of oil bound distemper on old wall surface complete all as specified and directed.
Preparation of old plastered ceiling surfaces and applying two coat of oil bound distemper on old ceiling surface complete all as specified and directed.
M&L for 3mm thick wall care putty on wall surface complete all as specified and directed.
M&L for 3mm thick wall care putty on ceiling surface complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds,
S & F 3 mm thick ordinary glass sheet quality and glazing with oil putty in squares n exc 0.5 sqm in each pane and hacking out old broken glass (any thickness size and quality or description ) from metal/steel frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones all as specified.
S&F Curtain rod 20 mm dia Aluminium fancy type complete with clamps, ring, ball shaped knobs at both end, all golden colour, complete all as directed by Engr-in-charge.
Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items.
M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm stone aggregated at roof including water proofing compound (WPC paid and measured separetely).
Supply only liquid water proofing compound Make pidilite LW as per manufacturer instruction
M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here in below. (a) 10 mm thick (av. Minimum thickness) plastering in cement mortar 1:3 finishing the plastered surfaces even and smooth over cleaned Rcc roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25 degree C, 0.87 to 0.89 kg/ Liter and viscosity 70-160 cps.(c) a coat of bonding material with applying hot blown bitumen 85/25 @1.2 kg/sqm (d) providing and laying 3 mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proffing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I (e) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction( Note : The work shall be executed through authorized applicator approved by the manufacturer of members)
S & F Aluminium handle ,cast type,anodised size 150 mm long.
S & F Aluminum, anodized, barrel towers bolt of extruded section and fixed 150 mm size.
S&F Aluminum alloy 250 mm long, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.
S & F in repair Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed Aluminium (extruded section)body complete all as specified as directed.
M & L Applying two coats of synthetic enamel paint on wood/wooden based surfaces over one coat of pink primer including preparation of new surfaces over 10 cm width or girth.
M&L Applying two coats of synthetic enamel paint on existing wood/wooden based surfaces including preparation of old surfaces of any description over 10 cm width or girth.
M&L Applying two coats of synthetic enamel paint on existing steel surfaces including preparation of old surfaces of any description over 10 cm width or girth.
Dismantling structural steel work in- cluding doors, gates but excluding framed truss etc.
S&F Fe 410-W (Gde-E- 250) quality-A Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication all as specified as directed.
Dismantling old/rusted Galvanised plain or corrugated mild steel sheeting any gauge thickness as in roof covering with ridges etc complete as specified and directed.
M&L welded steel wire favric supplied and fixed laid under floor weight per Sqm n exc 4 Kg/sqm complete all as specified.
S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw and washer in roof, wall etc all as specified as directed.
S&F 0.50 mm thick pre- painted galvalume aluminium zinc coating GI based corrugeted steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering / cladding to wall fixed with self tapping screws complete specified and directed.
M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete and as specified and directed.
S & F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm comp all as specified and directed at site.
S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 31x30 inchs fixed with steel fastners or steel screw complete all as specified as directed.
Dismantling water tanks and removing to store complete all as specified and as directed.
S&F Rotational moulded polytehylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltrs incl. making connections including 25 mm dia bore Ball Valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for iron pipe and fixed. (Minimum wt -455 gms) complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125 mm size fancy type, with CP neck 9 inch long with swivel joints, including fixing to steel pipe or union of 15 mm bore all as specified and directed.
S & F Stop valves cast copper alloy 25 mm dia, screwed down, high pressure, with crutch and butterfly handle screwed both ends for iron pipes or for unions and fixed in repairs all as specified and directed.
S & F Stop valves cast copper alloy 20 mm dia, screwed down, high pressure, with crutch and butterfly handle screwed both ends for iron pipes or for unions and fixed in repairs all as specified and directed.
S & F Stop valves cast copper alloy 15 mm dia, screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed all as specified and directed as in repairs.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 25 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness will be measured excluding plaster)
Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry complete all as specified and as directed. (Note : - Length of reinforcement bars cleaned of rust all around will be measured for payment.) (Note: thickness will be measured excluding plaster)
Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia complete all as specified and as directed. (Note: Epoxy based passivating, protecting & bonding coat of zinc rich system will be paid for separately).
Supply only epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ BASF) as approved by the Engineer-in-Charge (Note: Payment will be made for the total weight of resin and hardener in manufactured specified proportion)
M&L for drilling holes in concrete of suitable dia to providing and fixing 8 mm dia High Yeild steel reinforcing bar at on the RCC surfaces at 350 mm c/c or as per the site requirement, shear key shall be 75 mm long with embedment length of 40 mm and projecting out the concrete surfaces with horizontal bend of about 25 mm complete all as specified and as directed.
Mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material complete all as specified and as directed (Note: SBR latex will be paid for separately)
Supply only approved SBR latex from FOSROC/BASF/DR FIXIT/ SIKA for bonding coat (Note: Rate will be in terms of solid contents of polymer)
Mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note: Acrylic polymer will be paid for separately)
Supply only approved SBR latex from FOSROC/BASF/DR FIXIT/ SIKA for SBR latex modified cement mortar (Note: Rate will be in terms of solid contents of polymer)
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down unserviceable submain wiring any size,complete all as specified and directed.
M & L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in quoted rate.)
M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in quoted rate.)
M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed .(Note: Cost of cutting chase and making good shall be included in quoted rate.)
M & L for concealed point wiring for one 3 pin/ 5 pin 15/16 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in quoted rate.)
M & L for concealed point wiring for one 3 pin/ 5 pin 15/16 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 4 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good complete all as specified and as directed.(Note: Cost of cutting chase and making good shall be included in quoted rate.)
Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 4 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. Note - Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of conduit shall be measured and paid as one unit length. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 6 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 6 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. Note - Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of conduit shall be measured and paid as one unit length. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
Supply and fix LED batten 20 Watt with lamp lumen not less than 2100 lm, extruded aluminium housing,high power diffuser, slim and integrated design and necessary fixtures required for mounting the light fitting incl taking down old one. Complete all as specified and as directed. Note: Necessary certificates to be submitted to the department.
Supply and fix LED batten 10 Watt twith lamp lumen not less than 1050 lm, extruded channel in thermally conductive material,high power diffuser, slim and integrated design and necessary fixtures required for mounting the light fitting incl taking down old one Complete all as specified and as directed. Note: Necessary certificates to be submitted to the department.
S & F 2x2 recessed type LED 36 Watt light with efficacy >120 L/W, alongwith all connected acessories and required fixtures complete all as specified and directed.Note: Necessary certificates to be submitted to the department.
M & L Switch Modular type single pole, one way 6 Amp complete all as specified and directed
M & L modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed
M & L Flush type AC starter 6 M with DP MCB and plug top with indictor complete all as specified and directed
S & F Rigid non-metallic PVC conduit heaavy grade 20 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for provision of AC condensed water outlet pipe.
S & F in repairs Modular White cover plate with frame 3 M complete all as specified and directed
S & F in repair Modular White cover plate with frame 6 M complete all as specified and directed
S & F in repairs modular White cover plate with frame 8 M complete all as specified and directed
S & F in repair Metal flush box 3 module complete all as specified and directed
S & F in repair metal flush box 6 module complete all as specified and directed
S & F in repairs Metal flush box 8 module complete all as specified and directed
S & F in repairs ceiling rose 3 terminal PVC/polycarbonate isolated body type complete all as specified and directed
M & L Switch socket combination 2 in 1, 6A flush type complete all as specified and directed
M & L Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and directed
Supply and fixing 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN/DP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed
Supply and fixing TPN/FP 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity 40-100 A in the DB complete with connection testing and commissioning complete all as specified and directed
S & F sheet metal SPN DB 8 way double door with 200 Amps rated bus bar single pole with neutral complete all as specified and directed
S & F sheet metal TPN DB 4 way double door with 200 Amps rated bus bar single pole with neutral complete all as specified and directed
M & L Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed
S & F 40 mm dia GI Pipe light grade as fixing in PCC base for mounting the Air termination rod with other connected accessories like nuts, screws,etc. Complete all as specifie and directed.
M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge.
Supply and fix Air termination (vertical conductor), single pointed aluminium rod 12 mm dia and 300 mm long including suitable design of fixing components of gun metal as per fig 30 of IS 2309: 1989 all as specified and as directed.
S & F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 mm X 3 mm aluminium strip complete all as specified and as directed.
UNIVERSAL TRADING
KAKOLI ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .