REPAIR/ REPLACEMENT OF EXTERNAL LIGHTING AND ALLIED WORKS UNDER GE DRONACHAL

Supplying, installation, testing and commissioning of LED Bollard Light fitting of 9/10 Watt capacity and 600 mm height, suitable for outdoor garden/pathway illumination, complete with all accessories as required, of approved make such as Bajaj Electricals (BAJAJ Flute BGBOL 605 9W LED WW/) / Havells India / Crompton Greaves Consumer Electricals / Signify or equivalent, comprising pressure die-cast / cast aluminium corrosion-resistant housing with UV stabilized powder-coated finish, overall height approximately 600 mm (±5%), 9W high efficiency LED module with opal polycarbonate/acrylic diffuser for uniform glare-free illumination, operating on 220–240 V, 50 Hz AC supply, complete with integral LED driver, base plate/flange mounting arrangement suitable for fixing on PCC foundation with anchor bolts, provision for loop-in loop-out wiring through weatherproof terminal block, minimum IP65 protection suitable for outdoor use, earthing provision, internal wiring, and all necessary hardware and accessories, complete in all respects as required; including making PCC foundation of suitable size wherever not available, complete with excavation, leveling, curing, and finishing for proper installation of bollard light.

M&L for Supply installation testing and commissioning of IP 65 flexion tri-coloured LED strip rope light of 120 LED/mtr and with all necessary accessories rated Input power : 8W per meter, LED Driver : AC adapter, Input voltage rated voltage- 220V-240V AC, working voltage range :-100-300 VAC, Supply frequency 50/60Hz, power factor ≥ .9, Protections open circuit, LED reverse polarity, surge withstanding 2.0KV, CCT 3000K/4000K/6500K, temprature : 0 to 500C high quality of lighting color consistency but also protect products outdoor against from harsh environments outdoors, its can be used for decoration lighting and guidence lighting outdoors, delivers good performance of lighting in tri-color complete all as specified & directed (Note- 18 RM length for each roll)

Material and labour for Double wall corrugated HDPE pipe, ISI marked of dia 32mm with smooth internal and profiled external surface, non-pressure laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

Taking up old unsv LT UG cable of any size from trenches/road /floor/poles & wall complete all as specified and directed.

Material & labour for XLPE insulated heavy duty armoured LT under ground cable of size 6 Sqmm, 2 core 1100 V grade PVC insulated ,PVC sheathed ,multi stranded aluminium cable of following size in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc including aluminium lugs at ends of cable and making good the disturbed surfaces complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n exc 1.50m in depth and getting out in soft/loose soil for laying cables, erection of poles complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc. 25 cm in soft/loose soil complete all as specified.

Removing surplus excavated soil n.exc 50m and depositing where directed at a level n-exc 1.5 mtr above the starting point.

Supply, laying, connecting, testing and commissioning of 3 Core x 2.5 Sq.mm copper flexible cable, multi-stranded copper conductor, PVC insulated and PVC sheathed, 1100 Volts grade, conforming to IS 694, suitable for indoor/outdoor use. The cable shall be laid through conduit / surface / cable tray or directly connected to fixtures/equipment as required, including proper dressing, clamping, fixing, termination with suitable lugs, glands (if required), ferruling, and all necessary accessories complete in all respects as per site conditions and direction of Engineer-in-Charge.

S&F in repairs MCB SPN 240 Volts of capacity 40 Amps complete all as directed by Engineer-in-Charge.