REPAIR TO JOINERY ROOF CEILING PLASTERING SANITARY FITTING WATER TANK CLEANING AND ALLIED SERVICES AT 4 PARA SF 3 ASD 153 TA COY 2 CT AND IS DET OTM ACCN UNDER AGE BR I GE SOUTH UDHAMPUR

Amount

Demolition of Brick work or stone/boulders masonry, built in cement mortar all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and as directed.

Demolition of concrete (unreinforcement) of any description and any position not otherwise specifically provided complete all as specified and directed.

Cement concrete 1:3:6 , type C1 using 20 mm graded aggregate as in surface channel and drain completed all as specified and as directed.

Providing cement concrete 1:2:4 type B1 ( 20mm graded aggregate) as in coping complete, all as specified and as directed.

Demolition of reinforcement cement concrete of any description and any position not otherwise specifically provided complete all as specified and directed.

Providing Precast RCC 1:2:4 type B-1 (20mm graded aggregate ) as in Drain cover slab etc all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to E-250,complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick (in two layer 10+5)on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

5 mm thick rendering on ceiling in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and directed.

Solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, including dismantling of old ceiling/wall panelling complete all as specified and directed.

Dismantling structural steel any description including door steel gates etc complete all as specified and directed.

Rolled section as in main and cross beams , purlins , rafters ,posts where connected to common rafter and running rails,frame work of eves board, tank staging work etc conforming to Fe- 410-w complete all as specified and directed.

Running welding n exc 6mm for iron wire mesh door and fixing of hinges of wooden flush door with iron door frame in repair including petty repairs material like screws/nails etc. to make it functional complete all as specified and directed by Engineer-in-Charge. Note :- Any items required to be replaced shall be paid under respective items completed all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.

Factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

All as per item 25 above but glazed and skeleton shutter with sash bar for glass / wire gauge, complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size quality or description) from wooden /almn frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

3mm/4mm thick Figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

3mm/4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair drapery rod of 25mm dia powder coated decorative along with brackets and end caps of quality as approved by GE, complete all as specified and directed.

18/19 mm thick prelaminated particle board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work complete all including dismantling of old boards as specified.

Block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work 25mm thick including decorative laminate type 1 of surface finish colour and pattern as approved with adhesive 1.5mm thick complete all including dismantling of old boards., complete all as specified and directed.

Continuous (piano) hinges, mild steel,bright finishor electrogalvanised width of flaps (when open) 30 mm complete all as specified and directed.

100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

Supply only flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed.

0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or 'L' type or 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed.

Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed.

75mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in foundations filling and mass concrete, complete all as specified and directed.

Sand cushioning under floors including watering and consolidation complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Cement concrete rich colored chequered tiles machine pressed with imported pigment smooth finish of size (300 mm x 300 mm or any size as approved 20 to 25 mm) thick set and jointed with neat cement slurry complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises,complete all as specified and directed.

Vitrified Dura stone tiles of size 300 x 300 x 10mm thick as in floors and over & including 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair and 15mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair and 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished, as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

Glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

Non - Skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair and 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

All as per Seritem No 51 above but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 25mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing etc. complete all as specified and as directed.

Machine cut kota stone 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair and 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing etc. complete all as specified and as directed.

PCC 75 mm thick type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.

Preparation of old steel and iron surfaces of any discription exceeding 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted wood or wood based surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of old surfaces of walls and applying a coat of oil emulsion distemper over one coat of primer, complete all as specified and directed.

Preparation of new and old surfaces on wall and applying a coat of wall putty (JK/Birla) to make the surface smooth and even all as directed.

Applying one coats of cement base paint after preparation of old plastered surfaces of walls complete all as specified and directed.

Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 2000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

20 mm bore brass float valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule "as in repair" complete all as specified and directed.

S&F in repairs Gun metal globe or gate valve 15mm , with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

S&F in repair Sinks with draining board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts 600mm long, fixed in repairs, complete all as specified and as directed.

S&F in repair vitreous China wash basin, white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs Single Piece WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 370x695x795 mm, S trap-300mmr as approved and complete all as specified and directed.

Water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and directed.

S&F in repairs 15 mm dia WHB mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.

S&F in repairs 15 mm dia wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.

S & F in repairs 15 mm dia Sink mixer chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and directed.

200 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and directed.

15 mm bore Bib tap chromium plated in repair complete all as specified and directed.

S&F in repairs 15 mm dia Angle valves/ stop cock, fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed.

Stainless steel silver EWC toilet Jet Spray faucet with all accessories all as approved and fixed as in repairs complete all as specified and directed.

Health faucet ABS body with wall hook and 1.2 mtr chrome plated PVC hose pipe in repair complete all as specified and directed.

Chromium plated toilet paper holder in repair complete all as specified and directed.

600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed.

Supply and fixing in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild CP hings for pedestal pan completed all as specified and directed.

Soap dish in repair complete all as specified and directed.

Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and directed.

AC designer composite ceiling board 4 to 6 mm thick in 600 x 600 mm panel confirming to IS-14682 type-B category-3 including GI frame, holdfast & suspenders complete all as specified and directed by Engineer-in-Charge.

6 mm thick asbestos cement corrugated sheets as in roof covering fixed with L or J hooks complete including dismantling of existing sheets all as specified and directed.

110 mm bore PVC (SWR) pipe single socketed, in any length with rubber joints fixed to walls including demolition of existing PVC pipes complete all as specified and directed.

110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Corner glass shelf with chromium plated rails incl brackets as in repair complete all as specified and directed.

PVC waste pipe 32 mm bore with cup and washers "as in repair" complete all as specified and directed.

Concealed stop valve cast copper alloy fancy type chromium plated long shunk and cup screwed down high pressure with crutch or butterly handle screwed both ends for iron pipe or for unions "as in repair" complete all as specified and directed.

75 mm bore cast iron floor trap with grating including jointing to waster pipe fixed in cement concrete type B-1 1:2:4 "as in repair" complete all as specified and directed.

Sand cast iron 'P' or S trap 100 mm bore for ind type w/c complete all as specified and directed.

Viterous China urinal half stall type white including CP spreader, waster pipe etc. "as in repair" complete all as specified and directed.

Two coats of oil bound distamper on new surfaces over a coat of primer on internal walls complete all as specified and directed.

Two coats cement base paint on newly plastered surfaces including preparation of surfaces on external walls complete all as specified and directed.

Three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed.

Two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide zinc chrome primer complete all as specified and directed.

Two coats of synthetic enamel paint on new wooden surfaces including preparation over a coat of pink primer complete all as specified and directed.

Anodized aluminum fixed partition using approved medium weight aluminium section as follows: Horizontal members size 63.50 x 38.10mm at 0.75 Kg/m c/c spacing shall be n. exc 90cm. Vertical member size 63.50 x 38.10mm at 0.75 kg/m. c/c spacing n.exc 90cm. 3' height portion- Pre laminated board 12mm thick including necessary clips, rubber beading aluminium beading and fixing to the adjoining/existing wall etc. Top portion 12mm thick toughened glass with all necessary fittings/fixtures etc. complete all a specified and directed.

Powder coated aluminium door air tight anodised frame made of size 100 mm x 45 mm of sheet, thickness 1.50 mm with one or more rebate including jointing cleats etc for fixing anodised aluminium door shutter fully panelled (two Nos of panel of each shutter) with 5.5 mm thick tinted plain glass shutter rail made out of 80 mm x 45 mm of sheet thickness 1.5 mm (top, bottom, middle and side rail) single leaf side hung type including necessary jointing cleats, anodised aluminium fillets/Aluminium glazing clips with rubber gasket with aluminium fitting such as aluminium butt hinges 100 mm long 3 No on each shutter, aluminium anodised tower bolt 200 mm long 3 No for each door aluminium anodised handle 150mm 2 No 'D' type for each shutter & locking 6 lever Make : Harrison one on each door, bottom door hydraulic spring one on each shutter. All door fitting cleats shall be ISI (Single Shutter) marked (size of each door shall be as per site requirement) complete all a specified and directed.

Aluminium door closer hydraulically regulated universal type, suitable for door shutters complete all as specified and directed.

40 mm dia, cupboard knob fixed with nut, screw and washer of powder coated aluminium bright finished fixed in repairs complete all as specified and directed.

Butt hinges 75 mm sizes, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type C-21 complete all as specified and directed.

All as per ser item No 110 above but 100 mm size, type B-21 complete all as specified and directed.

All as per ser item No 110 above but 125 mm size complete all as specified and directed.

Aluminum alloy powder coated sliding door bolt 300 mm long and not less than 12 mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

All as per ser item No 114 here in before but 150 mm long complete all as specified and directed.

Extruded aluminum alloy handles, fabricated type and powder coated, 100 mm size complete all as specified and directed.

Aluminium alloy, anodised, 200 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

Mortice locks Brass vertical type size 100 mm 4 levers brass chromium plated with keys in duplicate as in repair complete all as specified and directed.

Pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified supplied and fixed as in repair complete all as specified and directed.

Description all as per ser item No 120 but frame size 105 mm x 60 mm complete all as specified and directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per ser item No 122 as above here in before but without glazing bar complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately

M/s AKHIL SHARMA (BID ID -3056533)

s l sharma and sons (BID ID -3056390)

M/S GURBACHAN SINGH (BID ID -3056652)