Civil Work

Amount

Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of speicals such on large plate, shoe, carcher, coupling, bolt and nut transportation charges and handling charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base as per the standard specification and as directed by the departmental officers.

Initial height of 3.00 m of length

Every additional 2.50m height

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c, etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, Standardised Concrete Mix M-30 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For First floor

For Second floor

Laying of Screed Concrete using Cemet concrete mix 1:2:4 (one cement, two sand and four hard broken stone jelly) using HBGS 6-10mm ISS metal for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Brick work in Cement Mortar1:6 using best quality Burnt Clay Brick of size 9" x 4 3/8" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

In First floor

In Second floor

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9" x 4 3/8" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

First Floor

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. (The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before use on work.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

PVC pipe of dia 110mm

75mm dia

160mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re- doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

PVC Elbow 110mm dia

PVC Elbow door 110mm dia

PVC Tee 110mm dia

Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level.

40 mm dia UPVC pipe

50mm dia UPVC pipe

Supplying and fixing following UPVC special of approved aulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

UPVC Elbow 40mm dia

UPVC Tee 40mm dia

UPVC Elbow 50mm dia

UPVC Tee 50 mm dia

Supplying and fixing in position best approved of BIS quality 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers.

Rain water pipe of 110mm dia

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25mm dia GM gate valve

40mm dia GM gate valve

50mm dia GM valve

40 mm GM wheel valve

Supplying and fixing position CI Nahani Trap / Floor Trap of the 100 x 75mm sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works).

Brick Jelly Lime Concrete 1:2:5 using 20mm brick jelly in Lime Mortar 1:2 and approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Flooring with Designed ceramic tiles of size 600 x 600 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with best approved quality, Designed colour ceramic tiles of 1200 x 600 x 10 mm sizes (Nano polish) set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm without pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing Counter top Oval type wash hand basin of size 850mm x 450mm with partition wall 11.50cm thick for pillars to a height of 0.75cm height and top with RCC precast slab of 50mm thick with centre opening to wash hand basin and top finishing with prepolished granite slab of 18 to 20mm thick and granite centre portion cutting with cutting machine to fix the oval type wash hand basin and all edges were nosing of round shape and fixing the wash hand basin in position with 15mm dia swan neck tap make and 15mm dia CP angle cock, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin and bottom portion will be covered with PVC shutter with frame including fixing charges etc., Complete and as directed by the departmental officers.

Supplying and fixing in position Wall Mixer of approved make conforming to BIS specification and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).

Supplying and fixing the Health faucet with Two way bib cock tap with flexible hose 15mm dia of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position of SS Heavy Duty Long Body Tap 15mm of approved quality make conforming to IS Specification and quality including cost of shellac, thread etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing Angle Cock of approved quality and approved make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality brass CP towel ring 150mm and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position 15mm dia Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing of Special type of mirror of size 1.00mx0.78 m of approved quality and brand PVC / Fibre Glass framed board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing of colour porcelin Soap dish of size150mmx150mmx50mm approved quality and make including labour for fixing in position etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing of cylindrical vertical PVC sintex water storage tank of 1000 litres capacity The tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all martials labour, conveyance, hoistings and fixing charges etc., (The water tank should be got approved by the Executive Engineer before use on works by the dept., officers).

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing WPC door shutters including cost of furniture fitting such as 3 nos 4"brass butt hinges, 2nos 6"brass tower bolt, 2nos 4"brass hand, 1 no brass, single key shutter, mortice lock without night latch, etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an

appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf of size 1.00m x 2.10m.

Best Teakwood Wrought and Putup with Scantling of doors, window and ventilators and any other similar joinery works including cost of teak wood scantlings of size below 3m in length and labour for manufacturing the frames and fixing hold fasts and fixing in position etc for all lengths as per architect designs.

Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf. Door Shutter Type : Thickness: 35mm thick

Supplying and fixing Mild Steel Grills for windows and ventilators etc., including the cost of mild steel angles, plates, rods, cost of welding charges and one coat of priming coat etc., complete.(The design should be got approved by the departmental officers.)

Supplying and fixing Colour laminated (Uniform Brown Finish) UPVC (Un-Plasticized Polyvinyl Chloride) Sliding Windows (special type) by factory manufactured. The size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing Colour laminated (Uniform Brown Finish) UPVC (Un-Plasticized Polyvinyl Chloride) Fixed Windows (special type) by factory manufactured. The size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have security protective hinges, security protective hinges and as per size for arresting noise and energy loss. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fixing of M.S.Pipe hollow box purlin section 40mmx40mmx3.60mm (medium weight) of approved quality and make including labour for fabrication, labour for petty iron works and painting two coats of synthetic enamel paint over primer etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing of M.S.Pipe hollow box purlin section 50mmx25mmx3.20mm (medium weight) of approved quality and make including labour for fabrication, labour for petty iron works and painting two coats of synthetic enamel paint over primer etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing 50mm puff panel sheet roofing with 5 micron polyester primer with the resistance capacity of saline mist upto an (ECCAT8)>50h and also with the resistance to moisture at the level (ASTMSD 2247)>1000h with the thermal conductivity of 0.024- 0.03 w/mc and the range of thermal should be -40 c to +80 c and it should be free from cfc . The polyester paint finish should be at the 18 micron level with back coating at 5 micron level . corner flash and ridge sheets with profile filler will be provided .The foam type should be B2,B3 and PIR with the Average density 40 +2kg/m with all the necessary accessories including and the colour of the puff sheet will be as approved by engineer in charge

Supplying and Fixing the High Density High Moisture Resistance (HDHMR) board of 18mm thick Single Skin wall panelling 2"x1" aluminium channel 2"-0" interval on both directed and fixing to the existing wall portion and fixing (HDHMR) board wall panelling using screws and approved quality and colour etc., Complete and as directed by the departmental officers.

Providing Cornice design work using 12mm thick HDHMR board center portion and alround nosing finishing with 4Nos all cornor side Computer numerical control machine (CNC) design work including labour charges for fixing etc., Complete and as dirtected by the departmental officers.

Providing Single skin wall panelling using 2.0"x1.0" Aluminium Channel 2"-0" intervals on single directed and fixing to the existing wall and fixing 12mm thick WPC board of approved quality and colour with grooves and finishing with 1mm thick special glossy finish laminated sheet etc., Complete complying with standard specification and as directed by the departmental officers.

Providing Single skin flutted wall panelling using 2.0"x1.0" Aluminium Channel 2"-0" intervals on single directed and fixing to the existing wall and fixing 12mm thick WPC board of approved quality and colour with grooves and finishing with 5.00mm thick fluted panel with teak wood ornamental beading of 3/4"x3/4" at bottom and top of fluted panels etc., Complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing double level false ceiling with12mm thick saint Gobiant False ceiling in the truly horizontal level false ceiling grid using aluminium section of size 2'' x 1'' of aluminium section density of 1.9 kg per metric cube will be laid at equal intervals for 2'feet x 2'feet. this section is held by 1'' inch cross 1 '' of aluminium along with a bullet screw in the ceiling. after this perimeter 1.5'' inch cross, 2''inch to be placed below the aluminium section.a joint compount will be applied to hide the joint then, the fiber raincoat tabe will be placed.including two coats of putty and one coat of whit primer , two coats of paint etc., complete complying with standard specification and as directed by the Departmental officers.

Supplying, Fabricating, erecting and fixing Hilux (or) equivalent Gyp Board FALSE CELING upto a ceiling height of 4.50 m from floor level using Hilux board Plain sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross direction for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively for horizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the desing pattern given and sprating the standard specification and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.

Supplying and fixing ornamental sound proof Armstrong grid false ceiling arrangements with alu. anodized T section and L angle frame work grid of size 60x60cm with Aluminium T section 25x25x2.8mm L angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dia M.S rods with suitable threaded nuts, suspended rod and hanging from ceiling at 1.20m c/c in longitudinal section and 60cm at middle portion 60x60cm panel should be covered with 12mm thick Armstrong sheet in grid so as to give neat finishing etc., complete complying with standard specification and as directed by the Departmental officers.

Supply and fixing of horizontal zebra fabric roller blinds of superior quality double ply blinds with 100% polister composition weight of 340 gsm / square metre and 0.40mm thick and finished width of 250cm with 100% light transmission etc.,complete complying with standard specification and as directed by the departmental officers at site of work.

Supply of storage unit of various size and 450mm width fabricated out of 18mm thick commercial plywood and all sides laminated with 1mm thick mica, including finishing neatly edges laminated with 2mm thick PVC beading with smoothing type door providing hinges hand lock and also laminated with 1mm thick for interior portion etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of partly glazed and partly panelled pre laminated partical board made with following provisions Partition : Partition tile based system (75mmthickx1200mm ht) made of Aluminium extrusions duly powder coated with 40 to 60 microns of required colour choice. The frame is fixed with tiles to the Choice of Pre laminated particle Board in the bottom and Glass panel of 5.50mm thick for bottom panel. Skirting will be provided at the bottom of the partition that can be used to run the cables to a thickness of 100mm. The system is developed to run the cables (power & data) from the bottom to the table top level (universal cabling system) Necessary provision will be given to fix table top with the partition along with vertical supports wherever required as directed by the departmental officers. (The colour and quality of panels should be approved by the departmental officers before execution of work)

Supplying and fixing of door shutter with partly glazed and partly panelled pre laminated particle board door shutter with frame made with following provisions. outer frame will be made with aluminium powder coated box section of size 2 ½”x2” and door shutter frame will be made with aluminium powder coated box section of size 4 1/2”x1 ½” the bottom portion of the door shutter will be covered with Pre laminated particle Board and Glass panel of 4.00 mm thick for top panel on both side. The glass portion shall be itched to avoid clear visibility in the room. Stainless steel butt hinges 3-Nos are fixed to run the door on the frame, Ball lock system of godrej make will be fixed on the middle portion of the door frame to provide proper security arrangements of the necessary door stopper is also provided bottom of the door shutter. The cost of the door shutter with frame will be inclusive of cost of material, labour charges for fixing in position, power consumption charges and other incidental charges etc., complete (The colour and quality of panels should be approved by the departmental officers before execution of work)

Paving the floor with best approved quality fine polished Granite Stone Slabs of 1200mm x 600mm, 16mm to 18mm Thick size and Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Providing Nosing to the granite slab by cutting the granite slabs edges half round / full round shape to required size and polishing using hand machine and the nosing is made highly smooth and gloosy. The cost includes labour charges and cost of machineries and polishing charges tc., complete and as directed by the departmental officers.

Providing grooving to granite slab at the intermediate edges of the vertical face with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc., complete

Paving the Top of roof with Solar refelective ceramic tiles of 305mm x 305mm x 7mm thick approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works).

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting the wall two coat of Ducco paint over two coat of putty and one coat of primer of approved quality and colour with necessary brushes, labour charges and scaffolding charges etc., Complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with Interior emulsion paint of first class quality and of approved colour with a priming coat and two coats of putty including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.

Painting the wall with Texture Finish Paint of first class quality and of approved colour with a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with Exterior emulsion paint of first class quality and of approved colour with a priming coat and two coats of putty including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling Crushed Stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and laying of rubber moulded hydraulic presses paver block inter locked blocks 83mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Supplying of the Reverse osmosis plant of capacity 50 liters/hr and Erecting in position of following liters capacity Industrial Model with following accessories. 1. Carbon filters - 3 Nos 2. Sediment filter- 1 No. 3. Membrane Housing – 4 Nos. 4. Reverse Osmosis Membrane (of 100 GPD) – 4 Nos. 5. Storage tank of 50 Litres capacity 6. Booster pump of 48 Volts and 1.8 Amps – 2 No. 7. Compatible Adapter – 2 No. 8. Reverse Osmosis Skid – 1 No. 9. Flow Resistor – 2 Nos. The system shall include automatic cutoff arrangements ( The pump stops automatically when the tank is full or when there is no supply to ensure safety and energy efficiency). The work shall be finished neatly and handed over in working condition after proper testing for flow rate, water quality and leak proof performance complying with standard specifications and as directed by the departmental officers

Supplying, laying and jointing CPVC 20mm pipes OF Standard Dimension Ratio 11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works) - Internal water supply above ground level.

Supplying and fixing of 20mm CPVC special of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

CPVC Elbow

CPVC Tee

CPVC Bend

CPVC Valve

Supplying, laying and jointing PVC 40mm pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply above ground level.

Supplying and fixing 40mm PVC special of approved aulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

PVC Elbow

PVC Tee

PVC Bend

Supplying and installations of UPVC louvers made from square tubes of size 32 mm x 32 mm x 3 mm in Vertical orientation supported using square tubes of size 50 mm x 50 mm x 3 mm ( confirming to IS 2062 Grade A or equivalent) in rear side of louver frame at equal intervals. Preparing detailed fabrication drawings and after approval by the Engineer in charge, providing, fabricating and errecting at all levels, structural steel and other accessories, including the cost of all labour, material and equippment, transpoting, lifting to all heights, setting in place, cutting, grinding, drillings, bending,bolts and bolting, welding, preheating and post heating for welding, testing etc., complete complying with standard specification and as directed by the departmental officers.

Collecting the scattered debries using tipper machinery from work spot and loading into the tipper lorry and conveying away the same to outside by lorry to a lead of 3km entirely with in city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers. (200 cft volume capacity)

GST at 18%

ABIRAMI ENGINEERING CONSTRUCTION AND CO (BID ID -1549134)