PROVN OF ACRYLIC OUTDOOR SYNTHETIC BADMINTON COURT, ACRYLIC OUTDOORS SYNTHETIC VOLLEY BALL COURT FLOORING AND STRONG ROOM NEAR QUARTER GUARD AT DCN SUB GP DABATHWA UNDER GE (U) MEERUT CANTT

Amount

M&L for surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L for treating the back fill in contact with foundation at the rate of 7.5 litre of emulsion per Sqm of vertical surface (area of the sub structure in contact with back fill to be measured) complete all as specified and directed.

M & L for treating the top surface of filled earth at the rate of 5.0 litre of emulsion per Sqm of surface, using Chlropyraphas chemical complete all as specified and directed.

M & L for treating thes under plinth protection(Min width 750mm) at the rate of 5.0 litre of emulsion per Sqm of surface ,using Chlropyraphas chemical complete all as specified and directed.

M & L Cement Concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L 50 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded aggregate as in plinth protection cement concrete surface.

M & L for providing reinforced cement concrete M-25 (Design Mix)), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix))), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix)), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concreteM-25 (Design Mix)), using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix)), using 20 mm graded stone aggregate, as in chajjas and the like complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6-8 mm mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per item No 18 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders

M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

M & L for 40 mm thick 1:2:4, type B-0, damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Material and labour for brick work with fly ash brick, straight or curved on plan exc. 6m mean radius, built in CM (1:6) completse all as specified.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of block work or concrete surface incl mixing of water proofing compound finished even & smooth with using extra cement. (Note: WPC shall be measured & paid seperately)

Supply only water proofing compound.

M & L for 5 mm thick rendering on ceiling of brick work with cement mortar 1:3 complete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

All as per item No31 above but on skirtings incl 10 mm thick rendering in CM (1:4) complete.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying 2mm thick putty,two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying 1mm thick putty, two coats of weatherprrof paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and directed.

M&L for preparation of new or proviously untreated steel surfaces of any description over 10 cm width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer.

S & F of steel window or ventilator fixed type with glazing bars complete all as specified and directed.

S &F for 1.00 mm thick, mild steel sheeting providing to steel gate and similar works and fixed to steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up,mitred angles etc. as required complete all as specified.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; doors; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similarsmall articles conforming to Fe-290 Gde-E-165.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S & F 3.0 mm thick forsted glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Machine pressed colour precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete including 25 mm thick cushion of sand layer all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 using 20mm graded aggregate) set in CM 1:4 as in window door cills, lintels, brssumers, PCC Kerb stone,steps , quions blocks(for use with masonary ) string coarses, coping kneelers, apex stone, pier caps, coloumns, post boundary pillars, bed plates, pintle blocks,ancho-rage blocks, bounders (for stone walling) corbels, brackets etc (of any section indicated), with plain fair faces including weathering, slightly rounded or chamfered angles & throating, concrete all as specified and directed.

M&L for treatment of roof and pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:3 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completely before including 10 mm thick cement plaster in cm 1:4 (Note:-Work done as per authorised applicator only)and all as specified and directed Make : Asian Paints /Thermax/Berger

M&L for broken stone or boulders hardcore of guage n.exc. 63 mm deposited spread and levelled in layers n exc 100mm thick watered and rammed to a true surfaces broken stone or boulders.

M&L 75 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base of floor

Supply and providing outdoor acrylic synthetic flooring for badminton court and volly ball court, applying base of bitumen/primer over concrete surface and providing 8 layers synthetic court as specified in perticular specifications including making line as per standard size given by Sports authority of India (SAI) complete all as specified and directed. (Note:- Laying of court work shall be carried out by authorised applicators of manufacturer) (Make:-Metco, A K International, Riccochet sufaces LLP, MAAOON INTERNATIONAL SPORTS, KTR Sports)

S & F 100mm dia galvanised iron pipe/ tube (light grade) as inb posts for volyball court including embeding in concrete , cutting , drilling, hooks, pullies, welding etc complete all as specified and directed.

S & F 50mm dia galvanised iron pipe/ tube (light grade) as inb posts for Badminton court including embeding in concrete , cutting , drilling, hooks, pullies, welding etc complete all as specified and directed.

M&L for prepairing and paintings of new or previously untreated surfaces of any description , exc 10 cm girth, with two coats of Synthetic enamel ordinary tint, over one coat of primeretc complete all as specified and directed.

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed FRLS copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light point or one fan point or bell point controlled by one switch or bell push

One 3 Pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 5/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 53 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Switch piano, flush type single pole, one way 5/6 Amp complete all as specified and directed

Switch piano, flush type single pole, one way 15 Amp

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 100 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed

M & L for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply & fixing MCB, SPN, AC, 240 volts of 40 to 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeincluding including 32/25mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, with electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

AEGIS INTERNATIONAL