Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC 16 BAITHAKKHANA ROAD 16 BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH KOLKATA | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹28.2 L+₹3.0 L (11.9%)Rejected-Finance | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹28.4 L+₹3.2 L (12.7%)Rejected-Finance | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹29.5 L+₹4.3 L (17.1%)Rejected-Finance P O WEST SRIPURIA DIST TINSUKIA ASSAM PIN 786 145 | TINSUKIA | ASSAM | 786145 | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹29.9 L+₹4.7 L (18.7%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹40.9 L
EMD Value
₹81,840
Closing Date
26 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DINJAN
GE DINJAN, PANITOLA (PO), DIBRUGARH (DIST), ASSAM PIN-786183
REPAIR/REPLACEMENT OF SECURITY LIGHT, TIMER AND CONNECTED ALLIED SERVICES AT DINJAN MIL STN AND MAINTENANCE FOR VARIOUS B/R NATURE WORK AT 162 MH UNDER GE DINJAN
2023_MES_593789_1
C/8552/E8
Open Tender
Electrical and Maintenance Works
Item Rate
300 days
DINJAN MIL STN
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE DINJAN
₹81,840
Yes
1 Jul 2023
8 May 2023
2 Jun 2023
8 May 2023
26 May 2023
21 May 2023
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed.
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments.
M&L for bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and as directed.
Taking out/down old/unserviceable under ground LT cables of any size and connections including pipes etc from trenches/walls/poles of any cross sectional area and keeping serviceable materials in safe custody for reuse and unserviceable materials removing from site complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 6 Sqmm 2 core, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 10 Sqmm 2 core,, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 10 Sqmm 4 core,, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed.
S&F in repairs 25 mm dia, rigid non metalic, PVC Conduits medium grade complete with all accessories suitable for wiring to street lights complete all as specified and as directed.
S&F for service cable, 1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed stranded conductor, nominal cross sectional area of 6 Sqmm 2 core complete all as specified and as directed.
S&F service cable,1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, stranded conductor, nominal cross sectional area of 4 Sqmm 3 core complete all as specified and as directed.
S&F single run service cable with PVC insulated, stranded copper conductor served with an inner seathing of FRLSH suitable for outdoor uses and PVC sheathed 3 core stranded conductor of 2.5 Sqmm nominal cross sectional area complete all as specified and as directed.
Taking down LED/CFL/sodium vapour/metal halide/MV lamp street light/flood light/ any other light fitting of any make and size, refixing the same in position after replacement of unserviceable/defective parts like fittings , lamps , LED driver etc as required to make the fittings in smooth serviceable condition and testing complete and as directed. Note : (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of worn out cables as per existing size and type of the fitting shall be deemed to be included in the unit quoted rate of this item. (iii) Necessary climbing arrangements like scaffolding for repairing/ removing/ refixing the fittings should be included in the quoted rate.
All as per item No. 1.014 here-in-above but for hanger lights/flood lights/ street lights.
All as per item No. 1.014 here-in-above but for aviation lights.
S&F in repairs lamp holder assembly as per existing garden light fitting with necessary modifying the electrical connections complete all as specified and as directed.
S&F for new LED street light fitting of capacity 120W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 90W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 70W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 60W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 48/50W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F in repairs integral compact wide beam high performance 200W LED flood light luminaire with PLUTO NEO LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs integral compact wide beam high performance 100W LED flood light luminaire with ROVER PLUS LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs integral compact wide beam high performance 70W LED flood light luminaire with ROVER PLUS LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs integral compact wide beam high performance 50W LED flood light luminaire with ROVER LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs modular junction box made of SMC/FRP of size 350x250x150mm with provision of MCB SP, and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel/ flat iron clamps, nuts and bolts complete all as specified and as directed. Make : Cat No. GSJB 3525 of Sintex /Hensel.
S&F in repairs modular junction box made of SMC/FRP of size 240x130x110mm with provision of MCB SP, and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel/ flat iron clamps, nuts and bolts complete all as specified and as directed. Make : Cat No. GSJB 2413 of Sintex /Hensel.
S&F in repairs, LED post top lantern of 40 Watt MAPLE Decorative post top for 360° indirect light with IP65 protection, resistant to impact and corrosion, glare free and better uniformity including providing and connection with 1.5Sqmm copper conductor, multistranded copper conductor cable of required length complete all as specified and as directed.
S&F in repairs decorative gate light 20W made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 Base, including providing and connection with 2.5 Sqmm aluminium conductor, cable of required length and taking down old unserviceable fitting of any make and size complete all as specified and as directed.
S&F LED 10W Bollard MAYA I Pressure die cast powder coated housing with PC diffuser, efficient high output LED with IP-65 protection complete all as specified and as directed.
S&F in repairs street light bracket arm of length not less than 1.5 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed.
S&F for batten holder with screw in existing post top lantern fitting by removing top post in place of pin type holder to suitable B22 base LED bulb complete all as specified and as directed.
S&F for LED post top 20watts cap HERITAGE rated, ideal to light up parks, gardens and heritage site with rated voltage 240 Volts including high voltage and short circuit protection IP 65, with necessary suitable fixing accessories/arrangements complete all as specified and as directed.
S&F for time switches digital type 415 Volt Three phase of 65 Amp rating with contactor fitted inside and MCB TPN 63 A, max load of 6 KW within steel enclosure complete including connecting items complete all as specified and as directed. Make : Havells/L&T/ABB/Legrand.
S&F in repairs power contactor 3 pole 65 Amps all as specified and directed Make : ABB / Legrand/L&T.
M&L for LT cable jointing kit straight through epoxy type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 35 sqmm including taking down complete all as specified and directed.
Supply only Integral LED aviation lights comprising of aluminium housing with polycarbonate enclosure complete all as specified and as directed. Make : Cat No BGAV302 LED of Bajaj/Philips/Havells.
S&F for time switches digital type 240v/ single phase of 32 Amp rating with contactor fitted inside and MCB SPN 40 A, max load of 12 KW within steel enclosure complete including connecting items complete all as specified and as directed. Make : Havells/L&T/ABB/Legrand.
M&L in repairs for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole coping including necessary form work for fair finish surfaces duly breaking the old damaged and placing a new flush box for termination inside the base complete all as specified and as directed. Note : Rate deemed to be included of CRCA sheet made out of sunken box with terminals.
Supply only LED lamp 10 Watt B22 base surge protection 2.5K,CCT 6500K complete all as specified and as directed.
Supply only LED lamp 14 Watt B22 base surge protection 2.5K,CCT 6500K complete all as specified and as directed.
Supply only LED lamp 20 Watt B22 base surge protection 2.5K ,CCT 6500K complete all as specified and as directed.
Supply only PVC insulation tape of pack of 30 rolls multi colour and black of standard size and thickness 2 to 3mm complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 20 to 45 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 60 to 120 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED Flood light fittings of capacity 50 to 150 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED Flood light fittings of capacity 200 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F Strem LED strip light 5W ,CCT value 3000K/6500K colour Red/Green/Blue IP-65, Outdoor type suitable for AC -120-300 V,50 Hz including taking down complete all as specified and directed.
M&L for scrapping the existing surfaces of the street light poles of height 7.5 metres (painting length) with emery paper, removing the dust and rust properly and applying 2 coats of aluminum paint over complete pole and stickering the pole with glow sign round the electrical pole at three places of 10cm width and numbering with paint not less than 4 letters with glow sign material at the bottom of pole and nomenclature shall be specified and as directed by Engineer-in-Charge.
M&L for drawing a circle and writing the number in side the circle on Electric pole not less than 4 letters and nomenclature and colour of the sticker to be stickered on pole shall be given by Engineer-in-Charge complete all as specified and as directed..
S&F in repairs 50 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, pole using suitable clamp/holder bat complete all as specified and as directed.
Taking down the service connections of the light fittings from connector/ ceiling roses/ overhead bare conductor etc of the street/ security lights , from height of approx 7mtr above ground by any means on PCC/ Metal poles with all safety measures to remove the carbon deposits/ disconnected due to wind/wear & tear complete and connecting / fixing back the connections /fittings at existing place complete all as specified and as directed
Dismantling steel poles/ struts, any size, transporting to store and stacking
M&L for steel tubular swaged pole 410 SP-22 (8.5 metre long) including CI base plate, finial taper plug, bolts, nuts & screws as per IS 2713 Part -I & II including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer on exposed portion and making strips of width 30 cm upto 1.5 m from the ground level in black and yellow shade in alternate layer including numbering of poles using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and two coats of anticorrosive paint over a coat of red oxide primer to embedded portion of pole including making good to match existing area complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts and nuts, checknuts and washers of galvanised iron or steel all as specified and shown in elecrical plate No. 3 of SSR Part-1 including necessary excavation and earth work in any type of soil, PCC 1:3:6 type C1, chamber with RCC 1:2:4 type B1, 40 mm thick cover with MS rod 80 mm dia 150 mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.
Comprehenssive maint of solar street light fitting such as lithium-ion battery, removal of rust, any minor repair will be carried out complete all as specified and directed.
Taking down carefully 15 meter long high mast light, removing all the serviceable fitting (6/9 Nos ) of 250/400 Watt for refixing after replacement of worn out and serviceable Rope, chain, gear, jubli clamp, etc. After servicing re-installation of the complete High Mast all as specified and directed by Engr-in -charge.
S&F rope of 6/9 mm dia stainless steel complete all as specified and directed by Engr-in -charge.
M&L for opening/ removing of burnt out winding and complete with new winding for 1HP motor for automatic operation of the high mast , after re-installaytion and testing all as specified and directed by Engr-in -charge.
S&F stainless steel gear (2" & 4", 2 Nos smaller and 2 Nos larger) complete all as specified and directed by Engr-in -charge.
M&L for chain suitable for High Mast light all as specified and directed by Engr-in -charge.
M&L for jubli clamp (16 piece) suitable for High Mast light all as specified and directed by Engr-in -charge.
M&L for copper wire 2.5 sqmm 4 core of 20 mtr length suitable for High Mast light all as specified and directed by Engr-in -charge.
FREEZCON
NChetia and Sons Trading
MAZUMDAR ENTERPRISE
STANDARD ELECTRIC WINDERS
MAA COMMUNICATION
M/s PRABIR ENTERPRISE
M/S S. P. ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .