PROVISION OF OFFICERS REST ROOM CUM RECREATION ROOM AND SPECIAL REPAIR TO ROOF SHEET VALLEY GUTTER AND CEILING AT ADMIN BLOCK AND NT POOL COLABA, MUMBAI

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete all as specified & directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified & directed.

M&L for cement concrete 1:4:8, type D-2 , (40mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6, complete all as specified.

M & L for Moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and well ramming all as directed.

M & L for Anti termite treatment Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M & L for Anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L for Anti termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M & L for Anti termite treatment treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M&L for broken stone / boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C 2 using 20mm graded crushed stone aggregate as in plinth protection laid in alternate pannels, finished even and smooth without using extra cement.

M&L for double charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for double charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 10mm thick backing coat in CM 1:4 , complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 10 mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces to be finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 15mm (10+5) thick cement plaster in cement mortor 1:4 on brick or concrete surfaces including mixing integral water proofing compound in the proportion of 3 % of cement content and surfaces to be finished even and smooth without using extra cement, complete all as specified.[Note : WPC will be measured and paid seperately]

Supply only integral water proofing compound complete all as specified and directed.

M&L 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

S & F Factory made single extruded WPC (Wood Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive trength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire ardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, with wood free EPS all as per direction of Engineer-In-Charge.[NOTE-stainless steel butt hinges shall be paid seperately]

S&F 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. Complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with partical board core and ply wood face panels, commercial type on both side including both faces are covered with decorative face veneer with lipping/frame to match, complete all as specified.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified ; supplied and fitted to chowkhats , complete all as specified.

S&F powder coated (colour of coating as directed) aluminium (minimum 50 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type,)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

S&F powder coated aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with new or old wooden beads/ aluminium beads in square all as directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

M&L for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section all as specified and directed

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F butt hinges 100 mm stainless steel hinges medium weight and fixed.

M & L for MS flat for hold fast wind ties etc Conforming to Fe-310-0 or Fe-410-0

S&F 150 mm long aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

M&L for cement concrete 1:2:4 type B-1 (20 mm graded stone agg) as in , bed plates etc all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer on 2 mm thick wall care putty (JK/Birla) all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade over a coat of primer complete all as specified.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, edges etc. also splays between floors and beams, etc.

M & L Reinforced cement concrete type A1 (1:1.5:3) using 20mm graded stone aggregate as in beams / bands complete all as specified.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M&L for TMT Mild steel bars 5mm to 10mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

S&F rolled sections as in main & cross beams , columns, hip and jack rafters , purlins where connected to common rafters and running rails,wind ties & any other places with angles cleats ot other connected plates confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.

S&F plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attahment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw all as specified.

S&F Plain galvanised mild steel sheeting 1.25 mm thick in ridges hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and opening for rain water pipe to be provided fixed with MS Flat complete all as specified and directed.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide incl preparation of surfaces.

S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with / including fixing brackets, Knobs rollers etc.all as specified and directed.

S&F counter top Thin rim type Vitreous china wash basin, white matt , rectangular shape of size 525mm x 415mm x 140mm including waste cupling brass chromium plated including bottle trap , complete all as specified. Make : Jaquar Cat Part No. JDS-WHT-25907N or equivalent make as specified in list of makes.

S&F fancy type Stainless steel with 190 mm extension body Pillar taps mounted , screwed down high pressure ,with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaquar Cat PArt No. VGP-SSF-81021N or equivalent make as specified in list of makes.

S&F fancy two way bib taps, chromium finish, screwed down, & fixed complete all as specified and as directed. Make : Jaquar Cat Part No. OPP-CHR-15041PM or equivalent make as specified in list of makes.

S&F Rimless single piece WC with UF soft close slim seat cover, hinges, single flush with sensor and manually operated incl all accessories of size 60 x 580 x 450mm (incl S- Trap 300mm ,complete all as specified and as directed. Make : Jaquar Cat Part No OPS-WHT-158515300UFSMTL or equivalent make as specified in list of makes.

S&F in aluminium anodised tubular towel rail 20mm dia 600mm long including necessary aluminium brackets complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook.

S&F moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified and derected.

S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

S & F stop valve /angle valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed.

S&F Toilet paper holder with flat recessed type stainless steel and fixed with suitable screws on wall/tiles, Complete all as specified and directed.

S&F Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles machined each exceeding 5 Kg by weight complete all as specified and directed by EIC

S&F in repair cast iron cowl suitable for 75mm dia pipe , complete all as specified.

S&F in repair cast iron cowl suitable for 100mm dia pipe, complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm bore complete all as specified.

S&F brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified.

S & F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms.

S & F 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as directed.

S&F in repairs Soap dish holder any type fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F decorative corner glass shelf shall be size of 300 X 120 mm and 8mm thick with railing 25mm high having edges rounded off and shall be supported on chromium plated brass brackets fixed with chromium plated brass screw on plugs or gutties fixed in wall.

M&L 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed.

S&F 100mm CI ‘P’ or ‘S’ Traps jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm bore of sand cast Cast iron soil waste pipe in any length with ears and jointed with cement joints, laid in trenches ot in floors complete all as specified.

S&F 75mm bore of sand cast Cast iron soil waste pipe in any length with ears and jointed with cement joints, laid in trenches ot in floors complete all as specified.

S&F 100mm bends (any radius) diminishing pieces or tapers (larger bore measured).

S&F 75mm bends (any radius) diminishing pieces or tapers (larger bore measured).

S&F 20mm bore of dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 300mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.

M & L for Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 Sec) in cement concrete 1:2;4 type B1 smooth finished and reforming benching as reqd for 200mm bore of pipe.

M&L, Extra for forming fair finished drain or channel 200mm inner girth in cement concrete, using ex-tra cement, including forms, moulds, mi-tred/stopped ends etc.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in Hard / dense soil, complete all as specified.

Removal of excavated soils from site to distance exc1.50 Km but not exc 5 Km and depositing where directed, complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; tank supports, framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

Dismantling plain or corrugated steel sheeting, any gauge, thickness, any description including Nainital or similar pattern roof coverings or as in valley gutter complete all as specified and directed.

Fixing only of Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F flat iron for Bands, straps, supports or stays for rainwater, valley gutter, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges large hasps and staples, chains,hand made sliding bolts, clamps,hold fasts, wall ties, hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts two way and three way straps, plate washers and similar small articles and straps to be screwed, ends including keys to MS angle or the like item conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Dismantling of ceiling boards any thickness etc including aluminium grid frame work complete all as specified and as directed.

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic conduit ISI marked with accessories in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

M & L for point wiring for AC/ Geyser and one 3 pin socket outler 15 Amps independent with cable 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic coduit including PVC bend, tee joints etc as per site requirement , ISI marked with accessories concealed in wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes conealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic coduit including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

S&F Modular Switch , 6Amp, One way, 1 module, ISI marked.

S&F Modular Switch , 16Amp, One way, 1 module, ISI marked.

S&F Modular Socket , 6 Amps, 2/3 pin combined 2 module, ISI marked.

S&F Modular Socket , 16Amps, 6 pin combined 2 module, ISI marked.

S&F Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked.

S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed.

S&F Modular white cover plate with Frame 4 Module, ISI marked.

S&F Modular white cover plate with Frame 6 Module, ISI marked.

S&F Modular white cover plate with Frame 8 Module, ISI marked.

S&F Modular metal flush box 4 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.

S&F Modular metal flush box 6 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.

S&F Modular metal flush box 8 module , ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F DB 08 way Double door SPN type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

S & F MCB SPN 63 Amps, 10 KA ratingcomplete all as specified and directed.

S & F MCB SP 06-32 Amps, 10 KA rating complete all as specified and directed.

S&F in replacement Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners.

Material & Labour for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25 x 4 mm with the help of bolts, nuts, check nuts and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type D2 and PCC cover 1:2:4 type B1 watering arrangement with GI pipe funnel, jali, and cast iron cover fixed on top of pit complete all as specified and shown in electrical plate No.3 including connection to the earthing test point and testing on completion.

Supply and fixing ceiling fans complete with blades, down rods with sefty GI wire connecting up to fan hook, electronic regulaor and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with wervice value 6.0 BEE. Five star rated with brushles diret current motor and connectding jup including provision of flexible 3 core copper cable.

Taking down old U/S exhaust fan. Supply and fixing exhaust fan , steel body AC single phase, 230 volt of size 250 / 300 mm sweep 1200 RPM with blades, and frame and louvers complere fixing arrangements on the wall with nuts and bolts making the good surfces all as specifed and directed at site. [Note:- Unserviceable exhaust fan shall taken on charge in MES store]

S&F of LED Bldg security light 45 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including 40 mm dia pipe bracket , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of bracket for street/security light fitting made of GI pipe 40 mm light grade 1.2 m long bend to shape including two Nos of clamps nuts and bolt as required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Ceiling light 36 WATT 2 ft X 2 ft Recess mounting led ultra slimceiling light with extruded aluminium housing and milky diffuser.LED ultra slim panel.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. laid in duct / along pole/wall including making connection complete all as directed.

S&F HDPE of pressure rating 6kg/cm sq pipe of 63 mm dia including necessary bends, elbows, Tees etc on cable protection complete all as specified and directed by Engineer-in-Charge.

Supply, installation, commissioning,Hi wall split inverter air conditioner electric driven single phase comprising indoor and out door units of capacity 1.5 TR complete with cordless remote control unit rating of ISEER-5 & above. Compressor type, rotary, refrigerant including copper pipes with insulation, copper armoured cables for connection of indoor and out door unit upto 6 mtrs length and PVC drain pipe of size 15mm upto 6 mtrs complete all as specified and as directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key , scrubbing down with water etc.

M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaxces finished even and smooth without extra cement as on wall with using water proof compound. [NOTE: Water proofing compound should be measured saperately.]

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate in foundation filling and mass concrfete excluding shuttering etc.

M&L for RCC M-25 design mix (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

S & F in repair Mild steel framed work (Fe-410-O) or (Fe-310-O) such as grill, gratings, sheet including welding to purpose made hinges etc with the ends of bars shoulders or riveted or forged into spikes framed guard bars railing and similar works fixing with bolt etc ,complete all as specified and directed.

S & F in repair MS plate (CHEQUERED) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150 mm handle complete all as specified and directed.

M&L in repair thickness of metal to be welded not exc.6mm,welding in repairs exc 2.5cm but not exc.5cm in length completed all as specified and directed at site.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thick above or below ground level including removal of debris out of Mod Land.

M & L 40 mm thick cement concret type B-1 1 : 2 : 4 ( 20 mm gaded aggregate as in floor finishes, sub bases including demolition, complete all as specified and directed.

M&L for plain cement concrete colour interlocking tiles 60 mm thick having (colour and pattern approved by GE) strength not less than 350 Kg/Sq CM laid over and including 50 mm thick dry sand cushioning and void filled with dry and compact, including compation by means of surface vibrator, includinng dismantling complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry build in cement mortar including all quions/archers etc completed all as specified and directed.

Supply and fix GI pipes medium grade (ISI Marked) of following size with all fittings /GI bends complete fixed to wall/ducts and ceiling or laid in floors ( in high rise buildings including scafolding)as specified and directed.

(a) 50 mm Bore

(b) 25 mm Bore

(c) 20 mm Bore

(d) 15 mm Bore

Supply and fix in repairs Gun metal globe or gate valve with iron wheel head screwed both end, with union for iron pipe with following size and fixed in existing lines all as directed.

(a) 50 mm Bore

(b) 25 mm Bore

(c) 20 mm Bore

(d) 15 mm Bore

Supply & fix in repair MCB DB, TPN 8 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming) (b) MCB TP 63 Amps, 10KA - 06 Nos. (c) MCB SP 40 Amps, 10KA - 06 Nos.

Taking Down and Supply and Laying in repairs PVC insulated XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 Core laid in trenches/ducts/wall/through pipe etc complete all as specified and directed.[NOTE-Taking down XLPE Cable shall be taken on charge.]

Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe size 200/250 mm) supply and Install complete of 3 WHP inclusive of 40 metre long submersible cable and starter of suitable size complete all as specified and directed by Engineer - in - Charge.

SHRI SAI ENTERPRISES

David Construction Co.