Tender ID

Karnataka

Cancelled

Works

Water supply/sewage lines

Providing FHTCs to 497households Nandoor K habitation of Nandoor K village in Kalaburagi Taluka through PWS Scheme at Nandoor K village in Kalaburagi Taluka

Rural Drinking Water and Sanitation Department

RWSSD Division Office Kalaburgi | Karnataka

Amount: ₹1.2 CrCloses: 9 Jun 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published29 May 2025
Cancelled29 May 2025

Cancellation Details

Cancelled

CancelledCancelledReason: Cancelled

Published 29 May 2025

Tender Value

₹1.2 Cr

EMD Value

₹1.8 L

Closing Date

9 Jun 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

Smt.Nikita

Mobile Number

Work Description

Providing FHTCs to 497households Nandoor K habitation of Nandoor K village in Kalaburagi Taluka through PWS Scheme at Nandoor K village in Kalaburagi Taluka

Tender Information

Tender ID

RWSSD/2025-26/WS/WORK_INDENT9243

Reference Number

RWSSD/2025-26/WS/WORK_INDENT9243

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Kalaburgi

Source Website

Subscribe to view

Documents Required

4 documents required · 0 mandatory · 4 optional

Technical Bid

OptionalAnnual Turnover Certificate

OptionalCompany Registration Certificate

OptionalReserved Category Certificate

OptionalSmall Scale Industries Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

It shall be the responsibility of the bidder to ensure credit of tender processing fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders, the departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end

EMD Payments through e-payment mode shall be made as one single transaction and payments made in part are liable for rejection

Bidder shall pay Contract Management Module Processing fees of 0.025% of the contract value (Min Rs.500/-&Max Rs.7500/-)soon after contract has been issued to bidder

As per Karnataka state Government order No. LD/300/LET/2006 Bangalore Dated-01/01/2007 and Government Letter No.PW/134/BMS/2007/Dated-27/07/2007 a sum amounting to 1% of the bill amount will be deducted towards Construction Labour welfare fund

All rates shall be exclusive of GST, but inclusive of Royalty for minor minerals, Karnataka Building and other construction workers welfare cess, shall be included in the rates, prices, and total tender price submitted by the tender

The rates quoted by the contractor shall be exclusive of GST. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law

Conditional tenders will not be accepted

GST will be paid separately

GST will be paid excluding the quotation rate as per the quotation approved by the SE circle office, Kalaburgi

The work will be inspected by the third party and the bill will be admitted only after the satisfactory report from the third party along with GPS Photos

The Employer reserves the rights to reject any of all tenders without assigning any reason

Financial year will be reckoned as the period between first day of April and thirty first day of March of succeeding year (Both days inclusive)

The tenderer should maintain the scheme during the defective liability period i.e. one year

The Department is not responsible for any delay in accessing e-Procurement portal

Tenderer shall note that the tenders of those found eligible as mentioned in clause 3- Qualification of the tendered in section 2: instructions to tenderers (ITT), will only be considered for evaluation

The tendered shall scan & upload all the original documents required for this bid to the e-procurement portal. The original documents should be produced at the time of opening of bid for physical verification

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc

Period of completion is as mentioned in the bid document, which includes rainy season

The contractor should follow terms and conditions as specified in bid document wherever is applicable

Work will be carryout as per the TOR enclosed

The contractor should submit quality control reports along with the bill otherwise bills will not be accepted

After opening of technical bid, eligible bidders work done will be sent to work done verification to concerned authority, more than 7 days for conformation delay of work done will be rejected

Bidder should quote the rate excluding GST amount

The increase in GST shall not be paid in the extended period of contract for which the contractor alone responsible for delay as determined by the authority while granting the extension of time

The tendered at his own responsibility and risk is required to visit and examine the site of works and its surroundings and obtain all information that may be necessary for preparing the tender and entering into a contract for construction of the works. The cost of visiting the site shall be at the tenderer own expense

Bidder should possess unconditional credit line Facility of minimum 30% of the amount put to tender from nationalized /scheduled bank and shall submit the certificate in the prescribed format only

Conditional LOC will not accepted

Annual turnover for the past five/relevant financial years should be certified by an ICAI Registered chartered Accountant The certificate should be affixed with the seal of the office of the charted accountants with the registration number legible along with UDIN number

The Documents which are uploaded by the bidder should be will scanned

All documents related to bid document are to be submitted mandatorily

Corrigendums / modifications / correction if any will be published in the website only

If any date in the tender time table is government holidays, nest working date will be considered

Pipes which are used for the work are tested by CIPET and CIPET report is must for the payment

After completion of the FHTC and HTC work the works is to be handed over to the gram Panchayat for its further maintenance

Final bill will be admitted only after the submission of 3rd party report handing over certificate and completion report

Bidders are bond the guidelines / instructions issued time to from the government

All other conditions as per the bid documents

The CC Road cutting work should be executed without Disturbing/ Damaging the Adjacent CC Road

The lowest bidder should execute the Agreement by Producing FSD & lesser amount in the form of DD or FDR from the Nationalized/ Scheduled bank within 7 days from the receipt of letter of Acceptance

The technical specification includes with all lead lift loading and unloading cost and conveying charges of material, HOM of Machineries etc complete

During course of execution the items of from the tender may required to be dropped or extra items is to be executed as per the site condition.in this regard the bidder should execute the work as per direction of the engineer incharge of the work

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e, 2020-21 to 2024-25) b) Satisfactory completed, as prime contractor, at least one similar work of value not less than ( not less than 50% of amount put to tender) attach certificate by not below rank of Executive Engineer

Work Done Certificate

Quantity wise work done ( As shown in bid document)

Others -- Qty.wise work done

Capabilities of Vendor

The Tenderer shall have valid class II KPWD/CPWD

PWD Registration Certificate (Class I/II/III/IV)

Contractor has to produce Bid Capacity on letter head duly signed & Information on Existing commitments/ Participated in tenders and ongoing works duly signed on letter head

Others -- On letter head

Qualification and Experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this work if work is awarded. Graduate/Diploma civil engineer 1 no and literate assistant SSLC passed 1 no

Others -- Document

A self Declaration stating that I / we have gone through all the Tender conditions and accepted them without any pre conditions as Per KW 4

Others -- on letter head

The contractor should scan the PAN Card & GST No

Others -- Xerox copy

Financial Status

To qualify for award of this contract each tenderer in his name should have in the last five years period (from 2020-21 to 2024-25) (a) achieved in at least two financial year a minimum financial turnover ( in all classes of civil engineering construction work only) of (Usually not less than two times the estimate annual payments under this contract) with UDIN Number

Audited CA Certificate of Annual Turnover

Report on Financial Standing of the Tenderer such as Profit and loss statement and auditors Report for the last five year ( 2020-21 to 2024-25) duly signed by CA

Others -- Profit and Loss

Unconditional Line of credit (LOC) not less than 30% of amount put to tender from (Rs.35.06 Lakhs) nationalized bank or scheduled bank (in the prescribed format enclosed)

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹2,930

EMD Fee Amount

₹1.8 L

Important Dates

Last Activity

29 May 2025

Published

29 May 2025

Bid Opening

10 Jun 2025

Download Ends

9 Jun 2025

Pre-Bid Meeting

4 Jun 2025

BOQ Preview

•

Providing FHTCs to 497households Nandoor K habitation of Nandoor K village in Kalaburagi Taluka through PWS Scheme at Nandoor K village in Kalaburagi Taluka

•

Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all...

•

Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basal...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6m...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 63 mm as per specification,design and drawings in...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including cost of a...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm as per specification,design and drawings including co...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. as per specifi...

•

Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

•

Providing Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any as per specification,design and drawings including cost of all material, labour charges and hirecharges o...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

•

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

90 MM ELECTRO FUSION COUPLER as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the En...

•

90 MM ELECTRO FUSION ELBOW as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-i...

•

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 80 MM GI COLLAR as per specification,design and drawings including cost of a...

•

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any 80 mm dia GI bend . as per specification,design and drawings includin...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

•

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with Murrum. as per specification,desi...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.Cutting in Asphalt Road Surfa...

•

Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffo...

•

Providing and laying in position plain cement concrete for levelling course for all foundation work. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...

•

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per specification,design and dr...

•

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per specification,design and drawings including cost of all materia...

•

Providing and fixing Strainers including cost of all materials ,labour charges,HOM and testing complete as per specifications.as per specification,design and drawings including cost of all material, ...

•

Supply, delivery, erection and commissioning of following capacity of micro processor based water disinfection equipment using Silver Ionization process based on Oligo dynamic technology, suitable t...

•

Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. as per specification,design ...

•

Earth work excavation for pipelines/cables In all kinds of soils. Depth upto 1.50m by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shorin...

•

KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter with special flange, compression type fittings, wa...

•

Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost o...

•

Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...

•

Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...

•

Flow control valve 5LPM/10 LPM/15 LPM; Providing and fixing Flow control valve using food grade materials SS 316 ball/1/2"(15 mm ) including cost of all materials ,labour charges,HOM and testing as pe...

•

Providing and fixing electrofusion Saddle comply with BS EN 12201-3:2011,PN-12.5 rating and Food grade raw material as per BS 6920 with Material of construction PE 80 or 100 and colour of fitting -...

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. as per specification,design and drawings including cost of all material, la...

•

Supply and installation of Best quality Brass BIB cock. 15 mm dia. as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lea...

•

Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

•

Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...

•

Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all basement and surface level works.return wall ,retaining wal...

•

Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent member...

•

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(Com-VoIII-II SR/I.No8.10/Pg.no.56)

•

Providing and fixing of ELECTRO FUSION COUPLER 63 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as d...

•

Providing and fixing of ELECTRO FUSION COUPLER 75 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...

•

Providing and fixing of ELECTRO FUSION COUPLER 90 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...

•

Providing and fixing of ELECTRO FUSION COUPLER 110 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as d...

•

Providing and fixing of ELECTRO FUSION TEE 63 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...

•

Providing and fixing of ELECTRO FUSION TEE 75 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...

•

Providing and fixing of ELECTRO FUSION TEE 90 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...

•

Providing and fixing of ELECTRO FUSION TEE110 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direct...

•

Providing and fixing of ELECTRO FUSION ELBOW 63 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as dir...

•

Providing and fixing of ELECTRO FUSION ELBOW 90 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as dir...

•

Providing and fixing of ELECTRO FUSION ELBOW 110 MM as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as di...

•

EF End cap kit PE 100 SDR11 PN16 D 63 as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the E...

•

BULK FLOW METER :-Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI...

•

Providing and Fixing 'Citizen Information Board A" Providing and fixing of typical 'Citizen Information BoardA" as per specifications and drawing. Two ACP Sheet of 4mm thick having minimum 0.25mm thic...

•

Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of l...

•

Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works. The granite/trap/basalt crushed graded co...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent...

•

Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Basement and surface level works.return walls,retaining wal...

•

Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Basement work and surface level return wallr retaining wall...

•

Providing and laying in position Reinforced cement concrete for M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Basement and surface levelworks. Return walls ,retaining wa...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Nandoor k.docx

Tender Document • 0.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Cancelled

Works

Water supply/sewage lines

Providing FHTCs to 497households Nandoor K habitation of Nandoor K village in Kalaburagi Taluka through PWS Scheme at Nandoor K village in Kalaburagi Taluka

Rural Drinking Water and Sanitation Department

RWSSD Division Office Kalaburgi | Karnataka

Amount: ₹1.2 CrCloses: 9 Jun 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published29 May 2025
Cancelled29 May 2025