EMF of 871 (647 MIG 224 EWS ) MS housing at Pkt.E Lok Nayak Puram Bakkarwala.

Supplying,Replacement, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm). a) 18 to 22 watt

LED Flood Light, powder coated pressure die cast aluminium(System lumen efficacy ≥120 and <135 lm/Watt).Supplying,Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separatedriver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 Hz,Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as perIEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electricalcircuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copperconductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). a) 200 watt (DSR.2025 8.15.5)

Supplying, installation, Testing & Commissioning of 2 Nos. fully automatic garden centrifugal Monobloc pumps (1 working and 1 standby )i/c installation of complete 150 mm suction header size and 120 to 140 mm size discharge header of length 3 to 5 mtr each arrangements along with cable connection with armoured cable size 4x16 s.mm from meter to starter and 3x16 s.mm from motor to starter panel .Electrical scope includes installation,cabling and connections with separate DOL starter control panel fabricated with 16 SWG MS sheet duly painted and equipped with MCB ,contractor and overload relay for automatic pump ON/OFF operation .The suction header shall be constructed using 150 mm pipe MS pipe and the suitable size discharge header using MS pipe complete with butterfly valves,NRV,Y-strainers as complete as required .

Fabricating , supplying and fixing wire mesh frame work made out of 40x40x6 mm thick angle iron having 40x6 mm flat strip and wire mesh 6 sg dia M.S wire with 25mmx75mm space in between mesh and top covered for rain protection by 16 swg MS sheet and making main door gate having suitable locking arrangement with godown lock i/c grouting with cement concrete & primer and spray painting with super synthetic enamel paint of approved color quality with heavy duty godown lock etc.complete as required

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3- 2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation ColourMatching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test reportand all testing required for LED fixtures as per BIS shall besubmitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). a)120 Watt

Supplying & replacement of storage type lead acid battery of 12 V , 180 AH for different Diesel Engine sets, i/c P/F battery cable , thimbles, connections, testing etc. as reqd.

Supplying ,Installation,Testing and commissining of Non return valve cast iron double flange as per IS/5312 PN-1.6 rating complete with bronze body & wedge stainless steel spindle ,Gland packing ,Rubber gasket a) 50 mm

Supply, installation, testing and commissioning of three phase 5 HP drainage dewatering pump for efficient sewage water removal having head upto 22 mtr and discharge 625 lpm etc complete as required

Supply and Replacement of automatic DOL starter in sheet steel enclosure type MN/ML with single phace protection feature suitable upto 7.5 HP Dewatering Pump, 3 Phase,50 Hz 415 V AC supply i/c dismantaling the existing starter, thimbling, connections, testing etc as reqd.

Please Enable Macros to View BoQ information