NIT No. 2 item No. 7 (2025-26) EE (T)/EE(EnM)M-4

Dismantling of one no. pump set installed at Mukhmail pur BPS & two nos. pumps set at OLB Jharoda along with allied accessories also breaking of existing RCC foundation with help of pneumatic hammer machine and Gas Cutter, welding also with help of manual labour etc.

S/o horizontal 30 H.P. monobloc water pump set of discharge flow rate- 24 L/S at 57-meter head range with C.I. impeller gland packing, sealing C-40 shaft TEFC motor, IP-55 “F”-class insulation Sleeve coupled with 30 HP, 3000 rpm, 3 phase, 415-volts TEFC motor, size of suction & delivery-100x80 mm with MS base frame. Make of Pump set: KBL,Lubi,ABB and any approved make of DJB

Supply of horizontal centrifugal pump with 50 H.P. squirrel cage induction motor including base frame, coupling and guard. The pump shall be comprising Pump Fitted with Impeller-CI, Shaft Sleeve- SS 410H standard bearing in fitted condition. Pump discharge 190 m³/Hr., Head- 42 metres. The motor shall be comprising- Rating-50 H.P., Three phase squirrel cage induction motor, Speed- 1500 R.P.M., poles-4 no., Frequency-50 Hz. 5Make: - KBL, KEC, ABB and any approved of D.J.B.

Casting of RCC foundation with the help of Iron Bars & C:C in the ratio 1:1.5:3. The work i/c fixing /grouting of MS foundation nut bolts of suitable size including welding of foundation bolts with the Iron Bars.

Supply of M.S. pipe of 100 mm dia. 05 mm thickness. MAKE: Any approved make of DJB

Supply of M.S. flange 100 mm dia. 05 mm thickness. ISI mark

Rubber insertions for 100 mm dia. pipe joints. D J B SOR Code1374

Supply of M.S Nut bolts washer. D.J.B. S.O.R: Item Code1034

Supply& fixing of anti-vibration mounting pads as required.

Supply of 100 mm dia. bends made out from 5 mm thick MS Sheet, dully welded and having flanges with holes on both sides

Supply of 150 mm dia. bends made out from 5 mm thick MS Sheet, dully welded and having flanges with holes on both sides

Supply & fixing of foundation bolts as required.

Supply of 100 mm dia. NRV PN 1.0. Make: - Kirloskar / IVC / DJB Approved make

Supply Non rising Sluice valve of size 100 mm, PN 1.0 Make: - Kirloskar / IVC / DJB Approved make

Supply Non rising Sluice valve of size 150 mm, PN 1.0 Make: - Kirloskar / IVC / DJB Approved make

Supply of M.S. pipe of 150 mm dia. 05 mm thickness. MAKE: Any approved make of DJB

Supply of M.S. flange 150 mm dia. 05 mm thickness. ISI mark

Supply of PVC insulated Aluminum armored 50 sq.mm three core cable for main to panel Make: Havells, Polycab, Grandlay and any approve make of DJB

Packing and transportation charges of the Pumps set. This includes shifting of the complete pumps set from shop to site and transportation and loading unloading cost done with the help of manual labor.

Making the required incoming power supply connections between main supply and new incomer panel by connecting the cable after relaying of cable and re -thimbling of cable ends as per requirement.

Fixing the above three pumps set over the base frame with the help of tools & tackles with the help of heavy labour as per site. MS pipe including fixing of suction & delivery along with valve, NRV with the help of the gas cutter, welding m/c including welding rods and other tools & tackles etc. complete in all respect as per site requirement

Painting of the complete new installed mechanical equipments with one coat of red oxide paint and two coats of black synthetic enamel paint.

Testing and commissioning of pumps set as per required parameters with relevant IS testing of the starter prior to switching on as follows. Continuity and earth testing. Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth. Checking for all tightness of nut and bolts.

Gupta Brothers (BID ID -1581393)

Super System Engineers (BID ID -1581438)

HYDROCON ENGINEERS (BID ID -1581507)

ARIHANT ENGINEERS AND TRADERS (BID ID -1580969)