Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.3 LAccepted-AOC PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹28.3 L+₹61,904.94 (2.24%)Rejected-Finance H NO 02 SAGAR ROAD OPPO MKD GIRLS SCHOOL TILAK NAGAR BIKANER 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance Other than lowest bidder. | |
| 3 | L3₹30.8 L+₹3.1 L (11.2%)Rejected-Finance STREET NO 11 SECTOR NO 4 TILAK NAGAR SAGAR ROAD BIKANER 334 001 RAJASTHAN | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Other than lowest bidder. | |
| 4 | L4₹31.2 L+₹3.5 L (12.8%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Other than lowest bidder. | |
| 5 | L5₹32.3 L+₹4.7 L (16.9%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L5 | Rejected-Finance Other than lowest bidder. |
Tender Value
₹39.1 L
EMD Value
₹39,900
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAL
GE (AF) NAL, AF STN NAL BIKANER (RAJ)-334001
AS DESCRIBED IN BILL OF QUANTITIES
2024_MES_647700_1
GE (AF) NAL/T-77/2023-24
Open Tender
Civil Works
Item Rate
273 days
GE (AF) NAL
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE AF NAL
₹39,900
Yes
11 Jul 2024
23 Mar 2024
20 Apr 2024
23 Mar 2024
18 Apr 2024
6 Apr 2024
23 Mar 2024 - 1 Apr 2024
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n exc. 15 cm thickness incl floor finishes ground level complete all as specified & directed. Note: All demolished material / debris should be disposed off outside the Airforce station Nal without any extra cost to the Contractor and with own arrangement of dumping site to dispose off material.
Demolition of cement Concrete of any description and in any position including any type of roof treatment , PCC padding, lime concrete, mud fuska etc, complete all as specified and directed. Note: All demolished material / debris should be disposed off outside the Airforce station Nal without any extra cost to the Contractor and with own arrangement of dumping site to dispose off material.
M&L Cement concrete 1:2:4 type B0,(using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, on junction of parapet, coping etc cement concrete surface finished even and smooth without using extra cement complete all as specified and directed.
Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and including brushing neat cement slurry with 3 Kg/Sqm in roofs, complete all as specified and directed.
M&L Cement concrete 1:3:6 type C1, (using 20 mm graded stone aggregate) as in roof paddding, mass concrete finishing as required gradient cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M & L APP based polymeric membrane minium weight 3 Kg/Sqm and Minium 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid by torch forced application over a coat of bitumen 85/25 grade applied hot @ 1.20 Kg/Sqm laid over and including a priming coat using bituminous primer @ 0.40litre/ sqm, over 15mm thick screed bed in cm 1:4 complete all as specified and as directed.
M&L for 15mm thick screed bedding in cement mortar 1:4 mixed with water proofing compound as per manufacturers instructions, on concrete surface of roof and finished even and smooth without using extra cement complete all as specified and directed Note:- Water Proofing compound shall be measured and paid separately.
M&L for Pre-cast Cement concrete tiles of size 25cmx25cm,22mm thick with grey cement and no pigment 1:2:4 type B0,(using 10 mm to 12.5 mm graded stone aggregate), machine pressed; set jointed and pointed in 1:3, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed.
Supply only Liquid water proofing compound ISI marked.
M & L for 75mm thick PCC1:3:6 ,type C-2 ( using 20mm graded aggregate) as in plinth protection, surface finished even & smooth without using extra cement including making joints and laid in alternet bay complete all as specified and directed by Engineer-in-Charge.
Material and labour 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed.
Supply and laying glossy finished chequered cement concrete tiles any Pigment of size 30cmx30cm, 22mm thick made by table vibratory method set, jointed and pointed in neat cement slurry as in floors with white cement & pigment over and including 15mm thick screed bed, complete all as specified and directed.
M & L for 40mm thick PCC 1: 2: 4, type B-1, (using 20mm graded crushed stone aggregate) as in floor and forming joints & finishing the surface even & smooth using extra cement complete all as specified
Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade 'A' complete all as specified and directed.
Surface excavation in soft/ loose soil n.exc 30 cm deep and averaging 15cm deep and getting out ,complete all as specified and directed
M&L for Rubber moulded precast cement concrete interlocking paver block with made by table vibratory method with pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and laying over sand cushioning all as specified and directed.
M&L for Sand filling under floors, floor finishes, paver blocks or in foundations including watering and consolidation all as specified and as directed.
Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing serviceable tiles to store. Note: All demolished material / debris should be disposed off outside the Airforce station Nal without any extra cost to the Contractor and with own arrangement of dumping site to dispose off material.
M & L for 25mm thick PCC (1:2:4) type B-0 ( using 12.5mm graded aggregate) as in sub base of floor surface finished even & fair, complete all as specified and as directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick mirror finish over and including 20 mm thick screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L Machine cut kota stone slab 20-25 mm thick mirror finish in riser of steps, skirting, dado and pillar laid over backing coat laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.
Material and labour for Mirror polishing on existing marble/ granite/ Kota stone/ stone work to give high gloss finish complete all as specified and as directed.
M & L for Glazed ceramic coloured tiles in vertical surface size 350x450x7mm/ 450x300x7mm thick set & jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick backing coat on fair faces of brick work or concrete surface in CM 1:4 complete all as specified and directed.
M&L for non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed.
Dismantling of stone slab and tiles of any description or thickness in floors aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.
Material and labour 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, landings, window cills cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble duet with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cm 1:6, and including rounding of edges of granite slabs 10 to 20 mm thick by grainding and rubbing and finished smooth, coloured as approved by GE all as specified and directed. Note: Front facia edges of granite slabs shall be rounding and finished smooth. The contractor shall quote his rates considering the above element, no extra paid on this.
All as per description of serial Item no. 26.00 here in before but as on vertical surfaces and over 10 mm thick rendering in CM 1:4.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm in hard dense soil, watering and removing surplus soil to a distance n exc 50cm and making good surface complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concreting.
S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F MS plain plates, square cut, with riveted, bolted or welded attachment FE-410-W (Gde-E-250) quality A as specified
S&F mild steel screw bolts 5cm to 10 cm length with hexagonal or square heads at one end and screwed at other fitted with washers
S&F rolled mild Steel work in tubular post / trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and directed.
S&F rolled mild steel framed work as in doors or gate of angle or other section with gussets plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete ofFe-290 grade E-165 quality grade B.complete all as specified and directed.
M&L mild steel flat iron (for securing wire mesh) bolt embedded in concrete including drilling bolts matching for wire including all necessary work and steel confirming to Fe-290 grade E-165 complete all as specified and directed.
S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc. 5cm but n. exc. 10cm long, dia of shank 11 to 15mm complete all as specified and directed.
Demolition of brick or stone masonry built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed.
Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out,complete all as specified and directed.
M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in subfloors, subbase, floors and paving, complete all as specified and directed.
M & L brick work with sub class -B bricks old size, straight or curved on planexc 6m mean radius built in CM 1:6,complete all as specified and directed.
M & L brick work with sub class -B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and directed.
Providing, cement concrete type B1 1:2:4 (using 20mm aggregate) in lintels upto 1.5m clear span, cills, steps; copings, kneelers, apex stones and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming soft/loose soil in layers not exc 25 cm.
Removing excavated material exc. 1.5km but n exc. 5.00 km and depositing outside MoD land, all as directed
Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only),complete all as specified and as directed.
Dismantling loose concrete cover of RCC column, beam, slabs, Chajjas and like at different bldgs, roughening and cleaning concrete surfaces with steel wire brushes washed with water and allowed to dry, applying of rust remover after cleaning to remove loose rust / scales / corrosion from reinforcement bars. The material to be applied to the rusted metal using brush, allow it to react for 16-24 hrs, providing and applying single component cementitious corrosion inhibiting primer for steel reinforcement on visible reinforcement surfaces to form a continuous film not less than 1 mm thick and preparing the surface to receive epoxy grout mortar. Providing fabric mild steel wire mesh 75mm x 75mm x 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25mm thick (average thickness) guninting mix using 1 part OPC 53 grade and 2 part sand mixed with adhesive/admixture at the rate as per manufactures instruction or 2% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by gunitind machine including necessary padding, steel scaffolding and shuttering for working platform/ formwork etc including rendering 5mm thick ceiling plaster in CM (1:3) to finish the surface even and smooth complete all as specified and directed.
Material and labour for repairing of soffits of slabs,Chajja,Facia and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any situation (including provn of support, formwork and welding of reinforcement and fixing in position and including provision of weld mesh of weight not less than 3 kg/ sqm and applying dubbing 1st coat of 20 to 25mm thick in CM 1:3 finished rough and finishing coat of 10mm thick in CM 1:3 finished even and smooth without using extra cement over and including cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of whether proof emulsion paint over a coat of primer to match with existing surfaces complete all as specified and directed. Note:- (i) Unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height. (ii) For payment purpose, the area of finished plaster in 2nd coat shall be considered.
S&F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcent Weight per square metre N exc 4 Kg complete all as specified and directed
Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
M & L for 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out suing extra cement using, complete all as specified and as directed.
M & L for 10 mm thick rendering on concrete surface in cm 1:3 as in ceiling surface to be finished even and smooth with out suing extra cement, complete all as specified and as directed.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surface in two layers (first 10mm and second 5mm) incl cm 1:4 to be finished even and smooth with out using extra cement, complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for Preparing newly plastered surface of wall and applying two coat of oil bound distemper emulsion over one coat of primer, over and including two coat of wall care putty to achieve a uniform smooth finish complete all as specified and directed.
M&L for Preparing newly plastered surface of wall surface and applying two coats of premium acrylic emulsion exterior paint over coat of exterior primer, of tint as approved in camouflage pattern to match existing surface complete all as specified and directed.
M&L Complete removal of existing treatment on walls and applying two coat of oil bound distemper over a coat of acrylic primer over and including two coat of wall care putty to achieve a uniform smooth finish incl preparation of surfaces complete all as specified & directed .
M&L Complete removal of existing treatment for preparation of old surfaces of ceiling and applying two coat of white (lime) wash on ceiling complete all as specified and directed by Engr -in-charge.
M&L Complete removal of existing treatment on walls and applying two coats of premium acrylic emulsion exterior paint over coat of exterior primer, incl preparation of surfaces, tint as approved by GE in camouflage pattern to match existing surface complete all as specified and directed.
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) not exc 1.5 sqm each
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) Exc 1.5 sqm but n. exc 4 sqm each
S&F Pressed Steel door frames size 125x60mm for doors with one or more rebates including necessary fixing lugs hinges, lock strike plate, etc complete all as specified and as directed.
S&F Pressed Steel door frames size 105x60mm for doors with one or more rebates including necessary fixing lugs hinges, lock strike plate, etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling back hollow to door frames, bed blocks etc complete all as specified and as directed.
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm both side Prelam PVC Sheet used instead of plain colour PVC sheet & edges will be printed to match with prelam sheet and reinforced with MS Square tube complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded both Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge Printed PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of Prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.
S&F factory made 35 mm thick 2nd class hardwood, Plain, framed, panelled shutters (two number of panels), in with panels of timber flat on both sides (feather edged), of 12 mm BWP commercial ply with commercial veneering on both faces; The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S & F factory made Glazed/Gauzed & Skeleton shutters 35mm thick open rebated & prepare to received glass, gauge etc edges of framing plain chamfered or rounded in window, ventilator etc are provided with stiles and rails in 2nd class hard wood all as specified in SSR part-I, section 8 clause 8.20(b),complete all as specified and as directed.
S&F Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gauzed Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm square guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wire mesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed Skelton shutter of window (x) 3mm thick sheet glass ordinary quality and with oil putty in square n exc 0.50 sqm in each pane fixed in glazed /gauge Skelton shutter of window xi) Fabrication and fixing arrangements as per specification cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed
S & F mild steel box type ventilator partially fixed with glass and partially with two leaf for glass & gauzed top hung type complete all as per item ser No 69 above.
S&F in repairs Galvanised mild steel plain wire Diameter in 3.15 mm fixed complete, all as specified and directed.
M & L for preparation of new wood surface of any description over 10 CM width or girth and applying two coat of synthetic enamel paint over a coat of pink primer , complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed.
Supply and fixing Butt hinges,100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, ISI marked, fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section,, ISI marked, fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 150 mm size extruded aluminium alloy handles fabricated type, anodised, ISI marked fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 300mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws, ISI marked complete all as specified and directed.
Supply and fixing in stainless steel wirecloths 0.36 mm nominal dia of wire and average width aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed..
S&F in mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
S&F in repair Stainless steel (Grade 305) curtain rods 25mm dia 0.80mm wall thick mild steel chromium plated incl supporting brackets complete all as specified and directed.
S&F in repair Stainless steel (Grade 305) Ornamental type brackets (Open Ends) suitable for curtain rods of 25mm dia all as specified and directed.
S&F in repair Stainless steel (Grade 305) brackets (Dead Ends) suitable for curtain rods of 25mm dia all as specified and directed.
S&F In repair 140mm floor door stoper of aluminium alloy body and tongue, anodised with hard drawn steel spring, ISI marked, fixed to door shutter
Taking up or down 15 mm dia steel tubing & connections including removal, complete all as specified and as directed.
All as per description of serial Item no.84.00 here in before but 20mm bore tubes.
S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls or laid in floors complete all as specified and directed.
All as per description of serial Item no. 86.00 here in before but 20mm bore tubes.
Cleaning and removing all scale and dirt from RCC / PVC tank capacity of tanks exc. 250 ltrs and up to 500 ltrs by emptying, drying, cleaning with chlorine/washing powder by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning and marking the date of cleaning on the tank with paint complete all as specified and directed. Note:- "Writing "CLEANED ON DD/MM/YY" on service water tank with letters or figures (Block. Roman) of size 5 cm high and min 5cm wide each.
Dismantling water tank of capacity 500Ltr, and removal from site , complete all as specified and as directed.
S&F 500 liter capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered white, hoisted and fixed in position, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F 20mm PTMT nipple suitable for HDPE water tank (minimum weight 45gms) complete all as specified .
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore
S&F in repair PVC (PTMT) float valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed suitable for 20mm bore pipe, complete all as specified and directed
S&F in repair vitreous china wash down water closet pan pedestal pattern ( type white including PVC seat cover , connection to waste pipe and flushing pipe complete, all as specified and as directed.
S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets, float and handle, L-Bend complete all as specified and directed
Supply and fixing in repair wash hand basin Vitreous china, light colour / white of size 560mmx410mmx180mm including brass chromium plated waste coupling, porcelain rubber stopper, including making necessary connections complete all as specified and directed.
S & F in repair stop valve / Angle cock 15mm bore fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S& F as in repair Toilet paper holder of brass body chromium plated fixed to walls with chromium plated (CP) brass screws fixed complete all as specified and directed.
S&F as in repairs Stainless steel soap dish fixed complete all as specified and directed.
S&F as in repair CP Toilet Jet spray with 600mm CP hose pipe fixed complete all as specified and directed.
S & F in repair long body stop valve15mm bore brass fancy type chromium plated with long shank and cup(concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F in repair 15mm long body bib taps long shank cast copper alloy chromium plated with crutch or butterfly handle screwed for iron piper or for brass ferrule
S&F in repair 15 mm dia Bib taps, short body, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, crewed with flange cap for iron pipe or for brass ferrule and fixed.
S&F in repair Pillar taps long body fancy type with capasten head chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed
S&F in repairs 15mm bore PVC connection pipe 450mm long with brass nuts at both ends , complete all as specified and as directed.
S &F in repair chromium pated shower rose 125mm size with or without swivel joints, any size including fixing to 15 mm bore steel pipe or union , complete all as specified and as directed.
S & F in repair towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden/plastic cleats , complete all as specified and as directed.
Demolition up to 100/75mm bore and breaking up drain pipes (AC/reinforced concrete/salt glazed ) complete all as specified and directed
S & F 110mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, fixed to walls & Floor complete all as specified and directed.
S & F 75mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, fixed to walls & Floor complete all as specified and directed.
S&F PVC (SWR) bends of 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends of 75 mm bore complete all as specified and directed.
S&F PVC 75 vent cowl complete all as specified and directed.
S&F PVC 110 vent cowl complete all as specified and directed.
S & F in repair 100mm bore PVC (SWR) floor trap, with grating plain/ hole including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S & F in repair 75mm bore PVC (SWR) floor trap, with grating plain/ hole including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement fixed in repairs complete all as specified and directed.
S&F in repairs waste down pipe 32mm bore for wash basin/sink complete all as specified and directed
M&L Providing and injecting emulsion for post construction anti termite treatment using chemical chlorpyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 concentrate along the external wall of building below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement 2 Coarse sand) in apron complete all as specified.
S&F MS Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, including bending and welding angles, as necessary, gusset plates, riveting, etc. and similar work conforming to Fe-290 Gde E-165 including cutting tops to shape as directed, embeding in concrete and screwing etc, all necessary drilling or cutting holes in brick/ concrete surfaces and making good with PCC 1:2:4, complete all specified and as directed.
Taking down U/S existing sub main wiring copper/ aluminium conductor including conduit/ casing and capping etc.
Taking down unserviceable main switches, DBs / changeover switch along with Teak wood boards etc and making good the disturbed surfaces of wall / floors to match the existing surface. Old retrived material will be issued to contractor as sch of credit.
Taking down carefully old MCB s/Isolators any type by unscrewing from board.Old retrieved material will be issued to contractor as sch of credit.
M & L for point wiring using 1.1 kV grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure haing zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Notes- [i] Wiring from the DB (distribution box) to terminal boxes for power plugs, fan regulators, switches, socket outlets, etc. shall be deemed inclusive in the quoted rates.
One fan point / Light Point controlled by one switch, with cables 1.5 mm² size
One 6 A socket outlet on same Board, with cables 1.5 mm² size
One 6 A socket outlet on independent Board, with cables 1.5 mm² size
One 16 A socket outlet, independent, with cables 2.5 mm² size
S & F modular type 2/3 pin combined shuttered type 16 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
S & F modular type 2/3 pin combined shuttered type 6 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
S & F modular type 6 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.
S & F modular type 16 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge
S & P ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.
S&F sheet metal enclosure 20 Amps single pole and natural with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 20 Amp fixed properly in concealed position including making good disturbed surface all as directed by Engineer-in-charge.
Material and labour for Cutting, Opening through existing brick walls of 300 mm dia to be for exhaust fan/ventilating fan and finished with the disturbed wall by cement plastering and cement mortar 1:4 and match with the existing surface.
S & F Exhaust fan 300 mm dia including louvers AC single phase 240 volts of size 300 mm sweep(metal body) and not less than 900 RPM including flexible wire 3 core 1.5 Sqmm from ventilator fan to ceiling rose all as specified and as directed.
S & F sheet metal enclosures MCB SPN DB double door 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 with double glazed door for incorporating MCBs,IP-43, including taking down old unserviceable single phase DBs, all as specified and as directed.
S & F MCB SPN 40 amps 'C' series breaking capacity 10 KA, 'C, curve 240 volts, 50 Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc.
S&F MCB SP, 6 to 40 Amps, 'C' series breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.
Supply and fixing in replacement Vertical load line DB double door TPN 4 way IP 43 protection with and including 4 pole MCCB 100 Amps 16 KA sheet metal enclosure with isolated neutral bus bar suitable for Door earthing, insulated 200 Amps rated busbar assembly for mounting MCB single pole/ three pole. Note : Rate quoted shall deemed to be including for cutting existing wall for fixing DB in concealed making connections of sub main wiring (incoming and outgoing) with suitable size of cable lugs etc. and making good the existing surface.
M&L for sub-main wiring with two single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm dia non-metallic PVC conduit fixed in wall including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, (for AC points). Note : 2 Run of 4 Sqmm, 1 Run of PVC conduit & 1 Run of 4 Sqmm earth cable shall be measured as single unit length
M&L for sub-main wiring in concealed PVC conduit with two single core 6 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonry including 20 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete. Note : Note : 2 Run of 6 Sqmm, 1 Run of PVC conduit & 1 Run of 6 Sqmm earth cable shall be measured as single unit length
S & F LED light fitting 1X10W bulk head luminaires with initial flux 1100 lumen, color temp 6500 K, color rendering index more than 80, including LED light including driver and wall mounting holder connecting up with three core flexible copper conductor cable of suitable size.
S&F LED study lamps light 7.5 W Decorative wall mounting antique finish fixture with Opal glass diffuser suitable for 7.5 W LED filament lamp E27 base complete all as specified and directed Make Havells catpart no. FLORETINE WL 1LS E27 ABR or equivalent in phillips, crompton, wipro.
S & F modular cover plate with frame, of following modules (ITEM 142.01 TO 142.04 ) complete all as specified and directed. Note- Modular switches, sockets & Cover plates with frame shall be of same make & model.
8 Module
6 Module
3 Module
2 Module
S&F rectangular modular flush mounted Sunken block of following (Item 143.01 to 143.04)modules suitable for mounting, Modular switches & sockets, complete all as specified and directed.
8 Module
6 Module
3 Module
2 Module
Supply and fix in repair stepped type electronic fan regulator,2 Module white polycarbonate body, flush type, 230 V, including connecting complete all as specified and directed.
S&F in repair of energy efficient Surface/Wall Mounted 20W integrated LED batten 4 feet Fitting with polycarbonate housing. Total system Lumen of 20W to 22W LED should be 2200 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours complete with all accessories as required with connections complete all as specified and directed by Engg-in-charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated. Note: old ceiling fans to be dismantled carefully and to be deposited in to MES Store.
S&F energy saving decorating box type batten light fitting 230 volts surface mounted complete with high effeciency glare free light LED lamp 10 watt blue coloured end caps with all accessories, pre- wired,CRCA housing integrated heavy duty electronic driver havinng THD < 10% including providing flexible copper wire twin core cable complete all as specified and directed by engineer in charge.
Supply, laying in trenches and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed.
Material and labour for GI Steel tubing light grade for protection of cable/earth continuity conductor fixed to pole / walls / roof or laid in floors , road, crossing or ducts fixed with clamps bolts nuts and washers etc complete all as specified and directed of pipes of size 50 mm dia
S&F LED street light 35 watt 230 V pressure die cast aluminium housing , heat resistant toughened glass with frame , IP protection IP 66 better optics for uniform distribution having surge protection 10 KV, sealed driver fixed on suitable size medium grade bracket with nuts bolts and washers on existing wall .
Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom surface to required level all as specified and directed by Engineer- in- Charge.
Returning filling in, including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.
Removing excavated material (i.e. soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.
Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified.
S&F sub class B bricks, old size having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge.
Supply Install testing and commissioning of Solar water heating system (Evacuated tube collector) based on direct transferring of heat of capacity 300 LPD, including backup system with heating element of suitable capacity, thermostat switch, electric connection etc. with and including complete civil work and MS work for staging of solar panel and hot water tank and including taking down existing system and removing from site complete, all as specified and directed.
Supply and laying steel water tubes medium grade, galvanised with all fitting and fixed to walls , ceiling or laid in floors of 25mm bore including taking branch connection from existing pipe line of any size complete all as specified .
Supply and fix hot water pipe duly insulted with glass wool and aluminium cladding 20 mm bore complete all as specified.
Supply and fix hot water pipe duly insulted with glass wool and aluminium cladding 15 mm bore complete all as specified.
Supplying & fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends, ISI marked , for iron pipe or for unions and fixed 25mm bore complete all as specified
Supplying & fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends, ISI marked , for iron pipe or for unions and fixed 20mm bore complete all as specified
Supply & fixing bip taps cast copper alloy screwed down with crutch or butterfly handle screwed down, ISI marked , for iron pipe or for unions and fixed 15mm bore complete all as specified .
SHREE GURU NANAK CONSTRUCTION COMPANY
Surya Buildcon & Engineers
N.K. CONSTRUCTION COMPANY
Beenu Co. Company
m/s gaurav enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .