SPL REPAIR TO BLOCK NO P-2 (04XJCOs GOVT MD ACCN) AT 399 (I) SUP PL ASC KWC TIMARPUR UNDER GE (NORTH) DELHI CANTT-10

Amount

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling rose, holder, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete

Taking down carefully MCB DB/SPN/TPN etc including making good the disturbed surfaces to match with the existing complete

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/exhaust point controlled by one, one way switch 06 Amps.

All as per srl item No 03 here-in-before but one fan point controlled by one, one way switch 06 Amps

All as per srl item No 03 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per srl item No 03 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per Serial Item No 03 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F of modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed

S&F of modular bell push with indicator, 06 Amps, single pole, one way, 250 volts complete all as specified & directed

S&F of modular switch, with indicator, 16 Amps, single pole, one way, 250 volts, one module complete all as specified & directed

S&F of modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed

S&F of modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed

S&F of ceiling fan modular regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts, duly ISI marked complete

S&F of ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

S&F of ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete.

S&F of wall mounted LED batten with polycarbonate housing and initigrated electronic drive 20 watt fixture 4 feet provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete.

S&F of surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete.

S&F of decorative wall mounting, brushed nickel finish fixture with Opal glass diffuser suitable with 9 W LED lamp B22 base.(Make of Bulb : Havells/Philips/ Wipro), and all accessories pre-wired including connecting up complete.

S&F of LED Bulkhead 12W luminaire of polycarbonate housing and enclosed with acrylic diffuser IP-65 protection incl connection complete.

S&F in repair LED security light fitting of 35 watts with pressure die-cast aluminium housing complete with all accessories, fixing of fitting on wall with necessary fixing arrangement, IP66 protection as required at site & connection complete suitable for pole dia 40mm.

S&F in repair exhaust fans steel body AC single phase 230/240 V of size 300mm sweep with louver and depositing old exhaust fan to MES store complete all as directed.

S&F in repair Ventilating fan, wall mounted type of 250 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frame/all required arrangement for mounting of fan including making good of disturbed surface etc complete.

M&L For Sub main wiring concealed with 6 sqmm (Nominal area) with two runs of single core cable PVC insulated FR multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 6 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge

All as per Srl no. 23 but Nominal area of wire 4 Sqmm

S&F of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete.

S&F of sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- (a) MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN/SP 63A, AC,240 volts - 12 Nos.

S&F of MCB SPN/DP , AC, 240 volts of 63 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete.

S&F of MCB, SP, AC, 240 volts of 6 to 32 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

S&F in repair AC single phase static energy meter of accuracy class 1.0, 240 V 50 Hz with Backlit LCD display of rating 10-60 A (measures and displays KWH,V,Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box and depositing old meter to MES store complete all as directed.

S&F in repair sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete

S&F in repair fans ceiling complete with electronic type regulator and accesoories 230 V, 1200 mm sweep. BLDC 5 star ratedenergy saving and depositing old ceiling fans to MES store complete all as directed.

S&F in repair water heater storage type, electric capacity 25 litres. BEE 5 star rated and depositing old water heater to MES store complete all as directed.

Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 50 sqmm 3.5 core nominal cross section complete

S&F (in replacement) LED landscape bollard outdoor garden light 10 watt, 230 volt, inverted pyramid tripod type with soft 360 degree distribution,600mm long IP-65 protection, incl necessary civil work for grouting & foundation work of suitable sizewith PCC work complete all as specified and directed

Supply, laying, jointing & testing in repair of GI Pipe, medium grade of 25 mm bore dia , including all fittings in old/new position, laid in trenches/ wall including taking down the old/unsv pipe line complete all as specified & directed.

S&F in repair gun metal, globe or stop cock/bib cock valve, screwed down high pressure with iron wheel head, screwed both ends complete for the following sizes of 25 mm bore dia.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft soil & getting out including levelling of bottom surface to required level all as specified.

M&L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable all as directed.

M&L for one layer of bricks class 'B' laid flat across the cable for protection cover on the top of the sand cushioning for LT cable protection complete

Removing excavated material /soil from site to a distance not exc 50mtr away and deposting where directed and level not 105mtr from the starting point all as directed.

Returing filling, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified.

M&L for GI tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete for size 40mm bore

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and removing from site all as directed.

Ditto as per item No 44 above but exc 1.5 sqm but n.exc 4sqm each complete all as specified and directed .

S&F Framed work such as grills, gratings, chowkhats of angle/channel section etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete, all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed.

S&F 35 mm thick second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beeds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening Complete as per direction of Engineer-in-Charge. Make : Rajshri

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.all as per manufacturer's specifications and direction of Engineer-in-charge.

S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

S&F Butt hinges 75mm size, medium weight, cold rolled mild steel complete all as specified and directed .

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F aluminium anodised barrel tower bolt 100mm long extruded section all as specified.

S&F 100 mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

Supply and fixing factory made uPVC white colour Three track three panels sliding window/openable type with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed .

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth over one coat of red oxide, zinc chrome complete all as specified and directed .

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for 1/2 brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

M&L for rendering 10 mm thick Ready Mix Plaster on brick or concrete surface in cement mortar on Internal Wall Surface finished even and fair without using extra cement.complete all as specified and directed.

M&L for rendering 15mm thick Ready Mix Plaster in cement mortar on brick work or concrete surfaces on External Wall Surface finished even and fair without using extra cement complete all as specified and directed. (Work will be executed upto 10m ht, neccessary scaffolding arrangement is included in quoted rates).

M&L for rendering 5 mm thick Ready Mix Plaster on ceiling concrete surface in cement mortar, finished even and fair without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of 3mm thick wall care Putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L for preperation of old wall surface and applying two coat of oil bound distemper over a coat of 3mm thick putty complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed.

M/L for preparation of old plastered surfaces of wall of any description and applying two coats of cement base paint all as specified and directed.

M&L including dismantling , Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed.

Ditto as per item No 76 above but as in dado/skirting over 10mm thick plaster in CM 1:4 all as specified.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.06 sqm but nexc 0.11 sqm, in floors etc. set & jointed, with neat cement slurry and pointed white cement with pigment over 15mm thick screed bed or bedding layer of mortar in cement mortar (1:6) for laying of tiles including dismantling of floor, hearth or wall tiling with cement mortar bedding, tucking and roughening of wall and floor, backing and dispose rubbish out off the premises complete in all respect all as specified and directed.

M&L for Glazed ceramic coloured digital wall tiles of size area exc 0.06Sqm and not exc 0.18Sqm X7-8mm thick set and jointed , including 10mm thick rendering in CM 1:4 ,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement surface even and faircomplete including dismantling of floor, hearth or wall tiling with cement mortar bedding, tucking and roughening of wall and floor, backing and dispose rubbish out off the premises complete in all respect all as specified and directed. Note- PD proof 101 LW(+) , shall be measured and paid seperatly

Supply only PD proof 101 LW (+) of Dr Fixit or eqe

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B 0 1:2:4 (12.50mm graded crushed stone aggregate) as in Chajjas slab and the like complete all as specified and directed.

Use & Waste of formwork to Chajjas, slab ,chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed.

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L Granite stone slab 18 to 19 mm thick machine cut polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite stone with and including screed bed of 20mm thick in cement mortar 1:6 all as directed and specified

Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction with a pressure of 2 to 2.5 kgs per sqm, surfaces finished even and fair by applying 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 15 mtr height from ground level). Notes :- (i) Before placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and alllow to dry. To this prepared surface apply chemistic plycrete admisture at the rate of 3% by weight of cement or all as per manufacturers instructions. (ii) When plymix coating is in tackey condition guniting is done with plycrete admixture at the rate as per manufacturers instructions. Plycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete incl taking down old steel tubing 15 mm bore.all as specified and directed,

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white incl seat cover (excluding flushing cistern & flush pipe) complete all as specified.

S&F in repairs vitreous china, wash hand basin with Half pedestal , size 550x400x200mm including MS brackets including cutting and priming in with 32mm CP waste coupling complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including flush pipe, brackets.

S&F in repair Rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity

S&F Single Lever Wall Mixer With Provision For Overhead Shower With 115mm Long Bend Pipe On upper Side, Connecting Legs & Wall Flanges complete all as specified and directed.

S&F in repairs bib taps with wall flange complete all as specified and directed.

S&F in repairs Angular Stop cock with wall flange 15 mm bore complete all as specified and directed.

S&Fix in repair Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses & Base Flange complete all as specified and directed.

S&f sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repair stainless steel plate rack made of .80 mm thick sheet of size 900x600x250mm complete all as specified and directed as Engineer -in charge .

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed

S&F Waste fittings 40mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed

S&F in repairs of Sheet glass shelf assembly conisting of 5.0mm thick sheet glass shelf 12cm wide with Chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs Corner glass shelf with bracket 200mm radius.

S&F in repairs 15 mm bore shower Rose chromium plated ABS material of size 100x100mm square brass with 'L' bend and PVC washers complete all as specified and directed. (Make Jaquar/Parryware or eqv)

S&F in repair PVC connection 15mm dia and 60 cm long with 2 Nos PTMT check nuts with washers complete all as specified and directed.

S&F in repairs CP hygienic spray (health facucet with 1.5M long tube) complete all as specified. (Make Jaquar/Parryware or eqv)

S&F in repairs Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified.

S&F in repairs Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified.

S&F in repairs Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified.

S&F in repairs Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified.

S&F 100 mm dia spun cast iron long bends(any radius) diminishing pieces or tapers(;larger bore measured) in repairs complete.

S&F 75 mm dia spun cast iron long bends(any radius) diminishing pieces or tapers fitted ovel access doors (;larger bore measured )in repairs complete as specified.

S&F 75 mm dia spun cast iron Branch pieces or tapers(;larger bore measured) in repairs complete as specified.

S&F in repair 110 mm bore PVC rain water pipe single socketed in any length with rubber ring fixed to wall with clamp incl taking down old pipe complete all as specified.

S&F in repair 100mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp incl bolts and nuts and securing ends of clamp to wall or roof.

S&F in repair 75mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp incl bolts and nuts and securing ends of clamp to wall or roof complete as specified.

S&F in repair 75 mm dia cast iron floor trap complete all as speicfied and directed.

M&L Salt-glazed stoneware gully traps, square or round mouthed, type `P' 150x100mm complete all as specified.

S&F CP Gratings100mm dia complete all as specified.

S&F Cast iron 75mm bore cowls

S&F Cast iron 100mm bore cowls

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified.

M&L 75mm thick PCC type C-2, (1:3:6) using 20mm graded stone aggregate as in plinth protection/path etc.

M&L PCC 1:3:6 type C-2 (40mm graded aggregates) Cement concrete in surface channels and drains incl necessary formwork all as specified and directed.

M&L PCC 1:2:4 type B-0 (12.5mm graded aggregates) for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed of mortar 1:6 finished with grey cement and pigment complete all as specified.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment incl 25mm thick sand filling under floors incl watering and consoildation complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and directed.

M & L for welding in repairs of n exc 6mm thick and not exc 2.5 cm in length as directed.

Resecuring or easing & adjusting, without taking down shutters of any description exc 1 sq. m and n exc. 2 Sq.m each.

Cutting holes in brick walls exc half brick but not exc one brick walls built in Cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete.

Dismantling cup board shelf, partition, wall panelling or similar items including shutter, insulation boards/slabs/blankets of any description, fixed in any position fixed with screws complete.

S & F 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and otherside balancing white as in shelf for Cup board complete all as specified and directed.

S&F Stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 40mm (when opened) complete all as specified and directed.

Dismantling/removing of old roof treatment of any type including brick tiles, mud fushka etc to get the original RCC surface,cleaning with water etc complete to receive plaster/PCC and removing the debries out of MOD land all as specified.

M & L PCC type B 0 1:2:4 12.5 mm graded aggregate as in roof padding including maintaining the slope complete all as specified and directed.

M&L for 15 mm thick screed bed over the concrete / brick roof surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- Application of water proofing treatment will be done by Authorised Applicator only.

Ajay Sahu & Sons (BID ID -3504159)