CERTAIN REPAIR TO DSC POSTS AND REST ROOM AND CONNECTED WORKS AT TECH AND DOMESTIC AREA AT AF STN CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

M & L Glazed ceramic tiles in vertical surfaces of size 300x450mmx7mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down complete all as specified and as directed by the Engineer-in-Charge.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down complete all as specified and as directed by the Engineer-in-Charge.

M & L Polished granite stone slab16-18mm thick coloured as in cooking platform/door sills,partitions, jambs, pillars, window-cills , set in 20 mm th cement mortar (1:4) including pointing in white cement (1:2) and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling complete all as specified and as directed by Engr in Charge.

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

S & F for 30mm thick flush shutters, solid core construction, with block core plywood face panels, commercial type on both sides, chemically treated against termite infestation complete all as specified and directed.

S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters all as specified and directed by Engr-in-Charge.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.

S&F II class HW plain solid straight chowkat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 100mm long butt hinges medium weight stainless steel with ISI mark, complete all as specified and directed.

S&F stainless steel sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts complete all as specified and as directed.

S&F stainless steel barrel tower bolt 150mm long complete all as specified and as directed.

S&F stainless steel handle fabricated type anodized 150mm long complete all as specified and as directed.

Supply and fixing 140mm size Floor door stopper of stainless steel body and tongue, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 410-0 or Fe310-0.complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C1, (using 20mm graded aggregate) for fixing hold fasts complete all as specified and directed.

S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed to aluminium/wooden Vent/window/door (cost of aluminium beads and neoprene included in relevant item of aluminium window) complete all as specified and directed by EIC.

M & L for powder coated Aluminium frame and shutter for sliding windows & ventilators and partitions (movable louvers type) with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, (minimum thickness of powder coating 60 micron for windows and ventilators with natutal matt fininsh) including necessary hinges, handle and sliding bolt complete all as specified and directed. [Note :- (i) Glass to be measured and paid separately under respective of work. (ii) Items shall be paid as per weight of aluminium section. (iii) The quoted rate shall be inclusive of rubber gasket/ PVC gasket, glazing clips, screws etc as required which shall not be measured for arriving the weight. (iv) cost inclusive of aluminium snap beading

S & F 4 mm thick ordinary quality glass, in square n exc 0.5 Sqm each pane, fixed to wooden/aluminium beading in wooden/aluminium window/ventilation etc including hacking out whrerever required complete all as specified and directed.

S & F 5.5mm thick ordinary quality glass, in square exc 0.5 Sqm each pane, fixed to wooden/aluminium beading in wooden/aluminium window/ventilation etc complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exc 6.0 m mean raduis and built in cement mortar (1:6), including demolition of old brickwork built in CM complete all as specified and directed.

S&F factory made box type steel window composite type with double rebate pressed steel frames 80mmx60mm (peripheral) and 80x75mm (intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/ ventilator double shutters of MS tubular section of size 50mmx20mmx1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for wire and putty for glazing shutter, handle of 100mm size made out of Z section 01No., MS stove enamelled black tower bolt of size 120mm 02 Nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long holdfast 04 Nos each window inluding necessary filling frame with PCC 1:3:6 type C-0 , including taking down existing window/ ventilator complete all as specified and directed.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water at any height with necessary scaffolding etc complete all as specified an directed.

M&L for rendering 15mm thick in cement mortar 1:4 on walls of surfaces finished even and smooth without using extra cement upto 12 Mtr height complete all as specified and directed.

M&L for rendering, 15 mm thick in cement mortar 1:6 on brick work/concrete surface finished even and smooth complete all as specified and directed.

M&L for rendering, 10 mm thick in cement mortar 1:3 on brick work/concrete surface, finished even and smooth with out using extra cement on ceiling complete all as specified and directed

Preparation of new plastered or unplastered surfaces and apply two coat of oil bound distemper on wall over a coat of primer all as specified and directed.

All as item No 34 here-in-above but on ceiling complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of acrylic emulsion exterior grade (100%) over a coat of primer complete all as specified and directed. incl all necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint upto 5 to 10 Mtr height complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered/concrete surfaces of walls and applying two coats of oil bound distemper, white or tinted upto 20 to 25 Mtr height including putty as required and necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted 15 to 20 Mtr height including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation & stopping of surfaces including leveling/edging the disturbed places using necessary filling compound of altek putty to obtain smooth regular/even finish using sand paper and applying one coat of exterior acrylic emulsion weather proof treatment upto 15 to 20 Mtr height complete all as specified and directed by Engr-in-Charge. Note :- The tint and shade be as approved by the GE) including necessary scaffolding etc.

M&L for complete removal of existing treatment from external surface on wall by wire brushed & stopping of surfaces & leveling/edging the disturbed places/edges using necessary filling compound obtain smooth regular/even finish using sand paper and applying two coat of exterior emulsion paint over and including one coat of primer and upto 15 to 20 Mtr height including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge.

M & L for repair steel wiindow/door fitting like handle, tower bolt and hinges including all necessary fittings, welding, screw, nut and bolt etc complete all as specified and directed.

S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles and completed all as specified and directed.

S&F in repair 20mm dia aluminium decorative type powder coated curtain rod or similar articles and completed all as specified and directed by Engineer in charge.

Supplying and laying in repairs of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11/ (including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) fittings on walls/ceiling or laying in floors including taking down complete all as specified. Make : Astral, FINOLEX, DUTRON

Supply and fixing in repair bib tap fancy type 15 mm bore ,CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed

Supply and fixing 1000 ltr rotational moulded triple layer ISI marked PVC tank in position at any location on top of the building including provision of new fittings suitable up to 80mm bore GI pipeand necessary float valve including taking down exising water tank complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removed of debris outside MD land complete all as directed by Engr-in-Charge.

Sand filling under floors or in foundations including watering and consolidation for interlocking paver blocks complete all as specified and directed by Engr-in-Charge.

M&L for Rubber moulded coloured (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment any shape and size, shade as approved by GE, 80mm thick conforming to IS 15658-2006 M-40 grade complete all as specified and as directed.

M&L for Plain cement concrete Type - D-2 (1:4:8) ,using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

S&F in repair vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concrete and flush pipe complete all as specified and directed by Engr-in-Charge

S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and 15mm pillar taps, cast copper alloy, waste coupling, waste pipe and necessary PVC connection etc. complete all as specified and directed.

S & F in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing urinal spreader of PTMT any colour, waste pipe, grating and Union for discharge pipe fixed complete all as specified and directed. Make: Parryware/ Cera (1st quality)/ Neycer/ Somany

S&F joist channel, angle, ms framed work as in grills, gratings , etc.. With ends of bars shouldered/welded or riveted or forged into spikes framed guard bars, grills, barred iron doors, ladders, framed balusters, walkways, railings, and similar works confirming to FE 290 Gde E 165 complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs washers and wastes,including bedding in cement mortar to dwarf wall or including finishing cantilever brackets and connecting union to pipe over all size 915x460mm with bowl size 410mmx330mmx160mm complete all as specified and directed. Make : Asain Paint Tractor UNO or Berger Commando or equivalant in nerolac.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding including taking down existing rain water and complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.

Providing and laying integral water proofing adhesive of average 1-1.5mm thick as per specifications given below: a) First step- cleaning RCC slab and (b) Second step- fill all cracks with poly plastic fiber adhesive and laying fiber mesh (45 GSM) over defected surface and applying two coats as repair over defected surface with poly plastic fiber coating adhesive mix with white cement (1:1) and water as required or as per manufacturer specification, Wall Bind of European paints and chemicals /approved equivalent.(c) Third step- Now apply this Poly plastic fiber adhesive mix with white cement in specified ratio over full surface of roof/concrete surface with fiber mesh (45 GSM) including 450mm (height) vertical surface/walls /parapet. (d) Fourth step- Applying top coat of wall bind as a final coat over entire surface. Contractor will be required to submit a valid MOU . In addition to this Authorised Applicator of abovementioned Adhesive Manufacturers shall have valid authorization letter from the manufacturers issued not earlier than 60 days from the start date of this work

M & L for scrap the old plaster surface upto minimum 2 mm deep and now apply first coat as primer mixing with equal portionn of white cement & wall bind adhesive and add small quantity of water for making paste and then mix it properly and apply on cemented surface with brush and after 15 min apply 2-3 coats with total thickness 1 mm which cover all distrubed surface of wall complete all as specified and directed. Make - European paint & chemical or equvalent

Schedule of Credit

jmv engineers (BID ID -3363337)

MS SACHDEVA BUILDERS (BID ID -3362481)

Anil Kumar Gupta (BID ID -3371641)

HARISH SALES CORPORATION (BID ID -3357736)

shree balaji builders (BID ID -3359387)