Construction of New Police Station with development works at Erode Government Hospital in Erode District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3: Earth work excavation in SDR (including refilling) a. 0 to 2 mt.

1.4 : Earth work excavation for Open foundation (including refilling) a. 0 to 2 mt.

1.7 :Earth work excavation in SDR for (excluding refilling) a. 0 to 2 mt.

2.6: Supply and filling of 40 mm HBSJ

2.7: Supply and filling of 20 mm HBSJ

7.2 : Providing Bitumen pad for Expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

31 : Weathering course

37.1 : White washing 3 coat (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

45 :Stucco plastering

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20mm dia

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 :Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112. : S&F of 300 mm dia sweep AC exhaust fan

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

12.1.1 : Brick partition work in C.M. 1:4 with Admixture using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

14.1.1.II : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and Basement

15.1: Cuddappa slab 20 mm tk. a. In Ground floor

b. In First floor

c. In Second floor

15.2: Cuddappa slab 40 mm tk. a. In Ground floor

b. In First floor

c. In Second floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.1.1 : Supply and fixing of Solid core flush door shutter of thickness 35mm a) door size 1000 X 2100 mm (Single leaf)

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.6.1: R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M20 grade c) 1000 X 2100 mm

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.5: Supply and Fixing of MS Door (for lockup door) a) MS Door of Size 1000 X 2100mm

24.1.1 : Supply and Fixing of MS ventilator of size (for lockup ) b) MS Ventilator of size 1350 X 600mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx 16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Painting with two coat of Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Painting with two coat of Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5. :PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using Fly ash bricks of size 23 x 11 x 7cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places

71.2. : Supplying and fixing of 32Amps triple pole main switch with fuse and neutral link

75.1.2. : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.1.1: Supply and fixing of 1 No.of 32Amps - Fuse Unit

79.2.1: Supply and fixing of 3 No.of 32Amps - Fuse Unit

80.1 : Supply and fixing of 450 x 375 x 20 mm thick TW plank

87.1: Supply and fixing of Three phase ELCB/RCCB

98.3.2 : TW panelled door shutter (with brass fitting ) c. 1200 x 2100mm. (Double leaf)

105.1 : Run of 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1.: Supply & laying virtifed tile (ivory) flooring with tiles size 600 x 600 x 8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including pointing

367: Providing wooden Melamine polish for new wood work

448.2. : Providing PVC Tee with end cap

ANNEXURE - II A1:One coat of wall putty for new walls and other similar works.

A2: Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A3: UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.

A4: Pigeon Rack arrangements

A5: HDPE water tank 1000 Litres capacity with ISI mark

A6:Supplying and fixing of 15 Amps 3 pin flush type plug socket

A7: Supply and fixing of 9 watts LED bulb

A8: Supply and fixing of 4' 18 watts LED Tube Light

A9: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A10: Supplying and fixing of 25W LED street light fittings etc.,

A11:Supply and fixing of 12 watt LED bulb

A12: Supplying and fixing of EB Panel (Busbar arrengements) for 1 Service

A13:Supplying and laying of 3.5 x 25 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75m putting 0.15m layer of sand and covering the three sides of the cable with bricks and refilling earth etc.,

A14: Supplying and clamping of 3.5 x 25 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps

A15: Supplying and fixing of following Miniature Circuit Breakers a) 4 Pole 63 amps MCB

b) 2 Pole 40 amps MCB

c) 2 Pole 32Amps MCB

d) Single pole 32 Amps MCB

A16: Supply and delivery of HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. TPMCB DB with Metal Door Cover with IP 42 Protection HIGHER END

A17: Supply and delivery of SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 4 way / 8 way / 12 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. SPMCB DB with Metal Door Cover with IP42 Protection HIGHER END

A18: Supply and delivery of 80W LED out door focus light fittings of best approved quality and variety with necessary fittings including all materials etc.,

A19: Supplying and fixing of following size of TNPHC Emblem & Aluminium Dye casting letters a)15" Height TNPHC Emblem

b) 12" dia Aluminium Dye casting letters

c) 9" dia Aluminium Dye casting letters

A20:Supplying & fixing Foam name plate (Acrylic ) with stickers of size 24" x 4" and 3mm thick with lettering for identifing the rooms including cost of materials

A21:Supplying of Navtal 7 Levers - 3 Keys

A22: Drilling of 150mm dia Vertical in bores in hard rock area to the required deptph as directed by the departmental officers. a) upto 150m below Ground level

b) From 151 to 180m

c) From 181 to 210m

d) From 211 to 240m

e) From 241 to 270m

f) From 271 to 300m

A23: Supplying and delivery of 200mm dia PVC casing pipe suitable for 200mm dia bore well (CM Casing medium depth)

A24:Supplying and fixing of 200mm dia PVC end cap for borewell of best approved quality with ISI mark conforming to IS specifications including cost of materials conveyance to site and labour charges for fixing in position etc., all complete

A25: Supply & Fixing of 150mm dia borewell MS Clamp set etc., all complete

A26:Supply and delivery of 2 HP open well Submersible Pump set

A27: Supply and delivery of three phase 2HP Panel board Star-Delta starter confirming to IS 13947 and IEC 947 suitable KW rating for operation in AC/3Phase/50HZ(+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos.,

A28: Labour Charges for erection of bore/openwell Submersible pumpset with proper clamps upto the starter. Upto 5 HP

A29: Supplying of 16 to 20mm dia of Nylon rope etc

A30: Supplying and laying of following dia PVC pipe 10Kg/cm2 below Ground Level a. 40mm dia PVC pipe

A31:Supplying and laying of following dia GI pipe above Ground Level a. 40mm dia GI pipe

A32: Supplying and fixing of following dia PVC/ specials a) 40mm dia PVC Elbow

b) 40mm dia PVC Tee

c) 40mm dia PVC FTA

d) 40mm dia PVC MTA

A33: Supplying and fixing of following dia GM/GI specials a) 40mm dia gun metal valve

b) 40mm dia GI Elbow

c) 40mm dia GI Hex Nipple

d) 40mm dia GI Union

e) 40mm dia GI Bend

f) 40mm dia GM Wheel valve

A34: Supplying and fixing of 3 HP Submersible motor

A35: Supplying and fixing of 3 Phase control panel board

A36: Supply and laying of 3 x 4.0 sq.mm flat cable in a trench to be excavated at a depth of 0.75 metre covering the cable completely with PVC pipe 40mm dia with ISI mark and refilling the earth.

A37: Supply and clamping of 3 x 4 sq.mm Flat cable on post or on wall with MS Clamps.

A38: Supply and laying of 3 x 2.5 sq.mm PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER for borewell arrangements

A39: Supply and clamping of 3 x 2.5 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

A40: Supplying and erection of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (Schedule-80) a. 32mm dia

A41: Core cutting in concrete slab100 mm to 200mm dia for pipe rooting for suitable dia of 100mm to 300mm

siva constructions (BID ID -1395163)

vkpbuilders (BID ID -1394977)