Construction of 05 nos washrooms with Septic tanks at KHPS NEEPCO Ltd Umrongso

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Sr. Manager (E/M) i/c C&P KHPS

Name of Work: Construction of 5(Five) Nos. of Washroom with Septic Tank at different Location (i.e Umrangso Main Gate Security Post, Khandong Dam Security Post, Umrong dam security post, Umrong Nallah Security Post and Kopili Valve House), KHPS, NEEPCO Ltd.

Contract No: NIT NO. KHPS/C&P/2026-26/515 Dt. 25.02.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures (excluding GST) To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Jungle clearing including cutting bamboo and trees below 500mm girth and removing the same outside the limit as directed. (b) Medium Jungle. 0.000 Sqm Excess(+) Full Conversion INR

2 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil 0.000 Sqm Excess(+) Full Conversion INR

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. 0.000 Cum Excess(+) Full Conversion INR

4 Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (c).Stone soling of thickness 150mm. 0.000 Sqm Excess(+) Full Conversion INR

5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4.1.5- 1 :3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 0.000 Cum Excess(+) Full Conversion INR

6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -All work up to plinth level.5.1.2 : 1 :1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 0.999 Cum Excess(+) Full Conversion INR

7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1 :4 (1 cement: 4 coarse sand) 0.000 Cum Excess(+) Full Conversion INR

8 Centering and shuttering including strutting, propping etc. (ii) 5.9.6 : Columns, Pillars, Piers, Abutments, Posts and Struts 0.999 Sqm Excess(+) Full Conversion INR

9 (iii) 5.9.5 : Lintels, beams, plinth beams, girders, bressumers and cantilevers 0.000 Sqm Excess(+) Full Conversion INR

10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more 0.999 Kg Excess(+) Full Conversion INR

11 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes 0.999 Sqm Excess(+) Full Conversion INR

12 15 mm cement plaster on rough side of single or half brick wall finishe with a floating coat of neat cement of mix : 13.8.2 1:4 (1 cement: 4 fine sand) 0.000 Sqm Excess(+) Full Conversion INR

13 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 26.88.1 30 mm thick 0.000 Sqm Excess(+) Full Conversion INR

14 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).26.86.1 Frame size 45 x 70 mm 0.000 Meter Excess(+) Full Conversion INR

15 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete. 9.72.3 100x85x5.5 mm (heavy type) 0.000 Each Excess(+) Full Conversion INR

16 Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 0.000 Each Excess(+) Full Conversion INR

17 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.1 250x10 mm 0.000 Sqm Excess(+) Full Conversion INR

18 Providing and fixing bright finished brass handles with screws etc.Complete. 9.81.1 125 mm 0.000 Sqm Excess(+) Full Conversion INR

19 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 0.000 Nos. Excess(+) Full Conversion INR

20 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore 0.000 Nos. Excess(+) Full Conversion INR

21 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 18.8.1 15 mm nominal dia Pipes 0.000 Meter Excess(+) Full Conversion INR

22 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.000 Sqm Excess(+) Full Conversion INR

23 Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately):12.25.1 12 mm thick 0.999 Sqm. Excess(+) Full Conversion INR

24 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 110mm dia. 0.000 Each Excess(+) Full Conversion INR

25 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 63mm dia. 0.000 Each Excess(+) Full Conversion INR

26 Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. ( a) In exposed surfaces or in trenches. (i) 110mm dia. 0.000 Each Excess(+) Full Conversion INR

27 Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches.(v) 110mm x 63 mm 0.000 Each Excess(+) Full Conversion INR

28 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(v) 63mm dia. PVC cowel of ISI make 0.000 Nos. Excess(+) Full Conversion INR

29 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade. 13.65.1 Two or more coats on new work 0.999 Sqm Excess(+) Full Conversion INR

30 Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 0.999 Sqm Excess(+) Full Conversion INR

31 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 0.999 Sqm Excess(+) Full Conversion INR

32 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 0.999 Sqm Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information