Development of Central Courtyard at Mubark Mandi Place Complex Jammu

Amount

Dismantling doors , windows and clearstorey windows(steel or wood) shutters including – chowkhats archi trabe, hold fast etc complete and staking within 50 mtr lead.

Dismantling expended metal or Irc fabric with necessary battons and bidding etc. including staking the serviceable material within 50 mtr. Lead.

Dismantling tile works in floor/ walls in cement morter including staking the servicible material within 50 mtr. Lead. ( 10mm to 25 mm thick)

Dismantling tile works in floor/ walls in cement morter including staking the servicible material within 50 mtr. Lead. ( 10mm to 25 mm thick)

Dismantling stones slab flooring in cement morter including staking the servicible material within 50 mtr. Lead. ( 25mm to 40 mm thick)

Dismantling old plaster or skirting, raking out joints and cleaning the surface to plaster including disposal of rubbish to the dumping ground within 50mtr lead.

Demolishing RCC work manually/by machanical means including staking of steel bars and disposal unserviceable material within 50 mtr lead.

Extra for cutting reinforcement bars manually/mechanical means in RCC work.

Demolishing brick work manually/by mechanical means including staking of serviceable material and disposal of in serviceable material in cement morter.

Removing mortar from bricks and cleaning bricks including stacking within 50 mtr lead in cement morter.

Demolishing cement concrete (1:3:6) manually/ by mechanical means including disposal of unserviceable material within 50 mtr lead.

Demolishing cement concrete(1:4:8) manually/ by mechanical means including disposal of unserviceable material within 50 mtr lead.

Careful removal of existing deteriorated/damage/weathered line plaster without damaging the surface.

Removal of all old plumbing (Internal & external) including WC, washbasin, taps, GI pipes, shaft etc and staking serviceable material including all leads ,lifts and carriage.( The Dismantle material shall be the property of the contractor)

Removal of Electrical wire and worth conduies both (Internal & External ) Including tubelight, Switches, Bulbs & all other fixtures. Inclusive of all leads lift and carriage. ( The Dismental material shall be the property of the contractor)

Dismentaling roofing including ridges, hips, valley and gutters etc. staking the material within the lead of 50 mts. ( The Dismental material shall be the property of the contractor)

Earth work in bulk excavation by mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge- all kinds of soil.

Earth work in excavation by mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge- all kinds of soil.

Extra for every additional lift

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8mix using 40 mm aggregate

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete flooring of specified grade with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete flooring of specified grade with1:2:4(1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement

Providing and laying DPC 50 mm thick in cement concrete of specified grade in 1:2:4

Providing and laying reinforced cement concrete including curing but excluding the cost of centring, shuttering with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) All work upto plinth

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in beams,lintel slabs, including curing but excluding the cost of centring, shuttering with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete both below plinth level and above plinth level.Fe 500 or more (TMT)

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including setting in position in cement mortar 1:3 (1 cement :3 coarse sand) including the cost of required centering, shuttering and curing but excluding cost of reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work in foundations ,footings etc

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of formwork in suspended floors, roofs etc.

Centering and shuttering including strutting, propping etc. and removal of form work in lintel , beams, plinth beamsetc.

Centering and shuttering including strutting, propping etc. and removal of form work in edges of slabs etc.less than 20cm

Centering and shuttering including strutting, propping etc. and removal of form work in edges of slabs etc.greater than 20cm

Centering and shuttering including strutting, propping etc. and removal of form work for columns, pillars etc.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing inCement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in super structure above plinth level upto floor V level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 Cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure above plinth level upto floor V level withplacing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

Brick Work in Lime Mortar 1:1:1 ( 1 Lime : 1 Surkhi: 1 Fine Sand)for span upto 6m with common burnt clay FPS bricks of designation 7.5 – as directed by Engineer/ Architect in- charge, item is inclusive of all leads and lifts including curing with proper approved methods.

Brick work in gauged arches including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in lime mortar 1:1:1 (1 lime : 1 surkhi: 1 fine sand).

12 mm thick cement plaster 1:4 mix

12 mm thick cement plaster 1:4 mix finished with floating coat of neat cement

Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers

15 mm thick cement plaster 1:4 mix

06 mm thick cement plaster 1:3 mix

18 mm thick artificial red stone plaster (1:1:3) 1 cement : 1 marble dust : 3 Stone dust

20 mm thick lime plaster 1:1:1 (1 slaked lime : 1 surkhi : 1 fine sand)

40 mm thick fine dressed red stone flooring

40 mm thick fine dressed red stone in riser / treads

Extra for treads

Extra for pre finished nosing in treads

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately): (Red Stone 30mm thick)

Providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand) including making the necessary chases in stone and holes inwalls wherever required Gunmetal Cramps 25 x 6 mm - 30 cm long

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately): (Red Stone 30mm thick)

Stone work in ashlar masonry in super structure up to floor V level in cement mortor 1:6 including pointing with cement mortor 1:2 with an admixure of pigment matching the stone shade and curing complete with one face dressed properly

Mirror polishing on existing marble work/granite

Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above groundlevel, including additional rows of scaffolding in stepped manner as perrequirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c,horizontal and vertical tubes joint with cup and lock system with M.stube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceablecondition of execution of work of cleaning and/ or pointing and/orapplying chemical and removing it their after the scaffolding systemshall be stiffened with bracings, runners connecting with the buildingetc. where ever required. if feasible, for inspection of work at requiredlocation with essential safety features for the work men etc, complete asper directions and approval of Engineer/Architect -in-charge. Note: - 1) The elevational area of the scaffolding shall be measuredfor the payment purpose. 2) The payment will be made once only for execution all items of such works.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) excluding grouting but including 3mm thick spacer. Size of tile 800 x800 mm

Grouting the joints with 3mm wide spaces with epoxy

Providing & lying flamed finish granite stone flooring (18mm)

Providing & lying Italian stone slab flooring (18mm)

Providing & fixing polish granite for urinal partation 18mm thick

Providing & fixing gang saw cut, mirror polished granite for kitchen platform 18 mm thick

Extra for making holes / cutting granite for fitting

Providing & fixing of 8mm thick toughed glass with digital glass colored etching painting

Providing & fixing of 35mm thick red stone grating (Jaipur Jali)over the drain

Providing & fixing of Victorian vintage case iron grill including hand railing with painting of copper oxide

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

P/F Ist Class Well Seasoned and chemically treated deodar wood ( of approved quality) work in beams, ties, karis, purlins and columns. Fixing as per the direction of Engineer/Architect incharge including AT treatment . (Complete Job).

P/L of twin layer brick tiles over wooden planks as directed by engineer/architect incharge including all leads and lifts. Ist layer shall be dry and second shall be in lime surkhi mortar in ratio of 1:1 (Complete Job)

Lime Concrete ( for terraces as a filler between vaults) in the ratio of 1:1:1:4 ( 1 lime: 1 surkhi :1 coarse sand : 4 graded brick aggregate of 40 mm nominal size) including cost of shuttering/scaffolding/safety measures and use of special tools, equipments for workers reqd. to complete the job .

P/L of APP modified pre fabricated 7 layers 3mm thick water proofing membrane , black finished reinforced with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.4 ltr/ sqm by same membrane manufacture of density 0.87 – 0.89 kg/t and shall be got through authorized application of manufacture of membrane including laying of geotextile cloth of 70 mils thickness over APP layer ( complete job).

P/L of 150-200 mm thick lime dhar on roofing as per traditional practice in 1:2:2 ( 1 Lime: 2 Sand: 2 brick aggregate 12mm to 40mm nominal size) using methi, gur, hemp, belgir etc. including beating and tempering as per specification : Ramming for minimum 10 days and cutting for minimum 20 days as desired by engineer/architect in charge including all leads and lifts.( complete job).

P/L of terracotta tiles above above the rafter as per traditional system with or without mortar/as approved design . Items includes cost of shuttering/ scaffolding/safety/ measure/ use of building to complete the work.

Providing and applying Lime Kara 1:2 ( 1 Lime: 2 Zikki Powder ) grinding mortar with grinding mill / manually on lime base , on all flat surface in two coats . First coat applying 3 to 4 m thick and curing properly at least 7 days, second finishing coat done after 7 days of previous coat as per tradtional practice .( thickness not more than 6mm)

Ornamental traditional brick masonry in mouldings and cornices ( not more than 30 cm in projection and 30 cm in depth as per traditional practice ) in lime mortar ( lime putty 1:2 surkhi) after removing the damaged and out of plumb masonry from the vertical surfaces as directed by Engineer/Architect in charge including all leads, lifts and carriage . (Complete Job): Less tha 100mm

Ornamental traditional brick masonry in mouldings and cornices ( not more than 30 cm in projection and 30 cm in depth as per traditional practice ) in lime mortar ( lime putty 1:2 surkhi) after removing the damaged and out of plumb masonry from the vertical surfaces as directed by Engineer/Architect in charge including all leads, lifts and carriage . (Complete Job): Greater than 100mm

Stucco Work -Making Moulding and cornice band with ornamental design as per the conservation Architect's designwith lime plaster (1lime:3 fine sand) up to 100 mm

Stucco Work -Making Moulding and cornice band with ornamental design as per the conservation Architect's designwith lime plaster (1lime:3 fine sand) > 150 mm

Providing Lime Kara on decorative /ornamental surface /stucco or embellishments as per decorative/ ornamental as per decorative /ornamental designs on surface highly precise

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Ist class Deodar wood

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Door and Window Shutters 35 mm thickness first class Deodar wood

Extra for providing ISI marked Anodized Aluminum butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws for cupboard shutters.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Construction of New Chatri Roof /Bangladhar roof style as per old design intact, including wooden and ,masonry work and finish with polish and lime kara as per prescribed process . Item includes cost of shuttering /scaffolding/safety measure/use of specified equipments for workers of building required to complete the work.

Supply and staking of good earth at site including royalty (earth measured in stack shall by reduced by 8% for payments.

Supply and staking at site dump manure from approved source including carriage (earth measured in stack shall by reduced by 8% for payments.

Rough dressing of the trenched ground including breaking clods

Spreading of dump manure or/ and good earth in required proportion (caused of dump manure and good earth to be paid separately)

Preparation of bed for hedging and shrubing by excavation 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth of breaking the clouds and mixing with sludge or manure in the ratio of 8:1 flooding with water, filing the earth, watering and finally find dressing leveling etc. including stacking and disposal of material within the lead of 50 mm and lift of 1.5 mm.

Disposal of Dismentaled material from premise up to an averagedistance of 20 km by MT.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 600x850 mm and 45 cm deep for single pipe line with three or more inlets.

Disposal of excavated earth from premises up to an average distance of 20 km by MT.

Restoration of heritage fountain to its original glory by way of refixing of missing parts including testing commissioning in all respects (Complete Job)

Marble stone flooring (Makrana white second quality) 16mm thick laid over 20mm thick base of cement water 1:4 and jointed with cement slurry including rubbing polishing and curing complete.

Supplying & filling of coarse sand

Supplying & filling of stone aggregate 20 to 40mm

Supplying & filling of charcoal

Supplying & filling of pebbles

Providing & applying 1mm thick cement base putty

Wall painting with premium acrylic emulsion paints

Providing 10mm thick mud phaska 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. 12.25.1 With common burnt clay (non modular) brick tiles of class

Extra for every additional 1cm thick of mud

Painting top of roofs with bitumen Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. 12.15.1 with residual type petroleum bitumen of grade VG-10

Providing gola 75x75mm Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75

Making Khuras 45x45Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing

Forming grooves of uniform size in the top layer

Scarifying the existing bituminous road

Scarifying the existing Metalled road surface

Providing edge molding to granite

Providing & fixing of information sign board in red stone including cost of pedestal as per the design including writing in alpha numricals ( complete job)

Providing and fixing ofAluminium work polyster powder coated for fixed frames

Providing and fixing ofAluminium work polyster powder coated for fixed shutters

Extra for providing dash fasners

Providing & fixing 5mm thick glazing in alminium door & windows

Providing & fixing 4.5 mm thick in alminium door composit pannel

Providing & fixing of dubble action hydrolic floor spring

Filling the gap in between aluminum frame

Providing & fixing of brass 100mm mortice latch

Providing & fixing of alminum casement

Providing & fixing of alminum round shape handle

Providing & fixing of alminum tower bolt 300x10mm

Providing & fixing of alminum tower bolt 250x10mm

Providing & fixing of alminum tower bolt 150x10mm

providing & fixing of stainless stell butt hinges 100x60x2.5

providing & fixing of stainless stell butt hinges 75x50x2.5

providing & fixing of stainless steel grade 304 wire gauze mesh

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.Rectangular shape 600x450 internal dimensions

Constructing brick massanory in class designation 75, 90x80 cm and 40 cm deepConstructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 20.0 (Drainage) 275 ₹ Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 20.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class

Extra for depth of main hole

Providing & fixing 45 cm x 20 cm stainless steel heavy section sinage plates incuding writing complete Job ( as per the design & direction of engineer incharge)

Providing & fixing of two HP self priming water pump

Proving & placing on tracce poly ethyline water storage tank of ISI mark

Providing & fixing un plasty size PVC rain water pipe 110 dia

Proving & fixing of plain PVC bend 110 dia

Proving & fixing of plain PVC clip 110 dia

Providing & fixing of cast iron 150mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. - Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc - 20mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. - Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc - 25mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. - External work fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc - 32mm nominal outer dia pipes.

Providing & fixing of GI tank nipple 32mm dia

Providing & fixing of GI ball valve 32mm

Providing & fixing of GI union 32mm

Providing and fixing of white vitereous wash basin 660x460

Providing and fixing PVC waste pipe 32mmdia

Providing and fixing Toilet Paper stand CP brass

Providing and fixing of China battery based infrared sensor operated urinals of approximate size 610x390x370 mm having pre & post flushing with water (250 ml & 500 ml consumption ) having water inlet from backside , including fixing to wall with suitable brackets all as per manufacturers specification and directions of Engineer in-charge

Providing and fixing of plain looking mirrior 1200mmx2100mm

Providing and fixing of glass shelf

Providing and fixing of pvc pipes of 4kgf/m 110 mm dia

Providing and fixing of pvc pipes of 4kgf/m 75 mm dia

Providing and fixing of pvc pipes of 4kgf/m 160 mm dia

Providing and fixing of pvc plain bend 110 mm dia

Providing and fixing of pvc door bend 110 mm dia

Providing and fixing of pvc plain bend 160 mm dia

Providing and fixing of mesh based PVC connections 600 mm long

Providing and fixing of mesh based PVC connections 450 mm long

Providing and fixing of CP jali100 mm dia without hole

Providing and fixing of CP jali 100 mm dia with hole

Providing and fixing of CP angle Valve

Providing and fixing of CP Long nose bib cock sensor based

Providing and fixing of CP Long nose bib cock sensor based

Providing and Fixing floor mounted, white virterpus china single piece , double traps syphonic water closet of approved brand/make, shape, size and pattern, including integrated white viterous china cister of capcity 10 litres woitj dual flushing system , including all fittings and fixtures with seat cover , citern fittings, nuts, bolts and gaskets etc including making connection ewith P/S trap cpomplete in all respects as per direction of Engineer in Charge