GEK-73/2021-22

Amount

Schedule 'A' Section - I

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for first quality joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-In- Charge.

M&L for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge.

M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. 15mm thick screed bed or bedding layer in C.M 1:6 etc complete all as specified & as directed

All the same as per here-in-above but vitrified tiles of size on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. rendering 15mm thick in C.M 1:3 on brick work or concrete surfaces etc. complete all as specified & as directed

Supply and fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge.

Supply and fix in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge.

Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge.

S & fixing factory made steel windows with side hung shutters including box type hinges with steel handle, tower bolt and steel peg stay complete with glazing bars all as specified.

-do- but steel window or ventilator, fixed type, with glazing bars -do- Note for Item No. 10.00 & 11.00 : Glass required for fixing in window and ventilator will be measured and paid for separately under respective item of this schedule. However the quoted rate deemed to include for necessary fixing of glass

Supply only 3mm thick frosted glass any size complete all as specified.

All as per serial Item No - 12.00 here in before but 4 mm thick in squares exc.0.5 sqm in each pane-ditto-

Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge.

Material & Labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge.

Supply and fixing Factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed by Engineer-in-Charge.

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed. .

S & F factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge.

S&F factory made soild PVC moulded door shutter 28 to 30 mm thick (stiles) with 2.4 (or) 6 rails panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethen painted on the front face and 2 mm plain PVC sheet on back face with partical bpard core etc specified and directed by Engr-in-charge.

Mild Steel works as in bends straps, hold fasts etc, conforming to IS-206 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified.

Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.

Supply only sheet glass ordinary quality 3mm thick and glazing with oil puty or fixed with wdn beads in squares n.exc. 0.50 sqm in each pane complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supply and fixing Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed.

S & F Mild steel butt hinges medium weight , cold rolled, 75mm, ISI marked, complete all as specified and directed .

Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Supply and fixing 200 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

M&L preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer.

Preparing surfaces of wood and wood based materials steel and iron work, new or old of any description and girth, not other wise described & treated with tar or coal tar black paint and treating ends of posts or back of chowkhats etc area tarred exc. 0.1 Sqm but n.exc. 0.50 Sqm each.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.

Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed.

Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, otching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directe.

Dismantling timber scantling un framed work 40 sq cm and over in section in any position, unframed work complete all as spd.

M & L 2nd class HW clean Sawn timber scantling/posts complete all as specified.

S&F Anodised aluminium frame for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F sheet glass 5.5 mm thick tinted glass in square exc 0.5 sqm in each pain complete all as specified and directed by Engr-In- Charge.

Supply and fixing bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing bib cock with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply & fixing 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed.

S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type)

S & F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Supply & fixing in repairs brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified

Supply & fixing 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, fixed as in repairs complete all as specified and directed.

Supply & fixing 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs complete all as specified and directed.

Supply & fixing for 15mm bore pipe, PVC (PTMT) float valve, fixed as in repairs complete all as specified and directed.

Supply & fixing for 20mm bore pipe, PVC (PTMT) float valve, fixed as in repairs complete all as specified and directed.

Supply and fixing central hole Basin Mixer, WHB/Bathroom, Kitchen , without poupwaste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing chromium plated shower rose with or without swivel joints 100mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing of PVC waste down pipe of 40mm bore complete all as specified and as directed.

Supply & fixing of PVC waste down pipe of 32mm bore complete all as specified and as directed.

Supply and fixing 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.

Supply and fixing 15mm dia PVC connection with PTMT nut, of length 750mm, fixed as in repairs complete all as specified and directed.

Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe.

S & F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe

Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing wash hand basin, vitreous china, white, decorative type, flat or angle back, size 550mm x 400mm incliding cutting for and pinning in ends of brackets or erecting stand but exclusive of piller tap and waste pipe, fixed as in repairs complete all as specified.

Vitreous china squatting pan, "Orissa pattern" of size 580 x 440 mm white with integral foot rests, cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete fixed in repair.

Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.

Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.

Disconnecting water tank exc 250 & nexc 500 ltrs existing tanks, setting aside (or lowering if required) forrep airs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting water tank exc 500 & nexc 1000 ltrs existing tanks, setting aside (or lowering if required) forrep airs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.vxc 250 & nexc 500 capacity water tank

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.vxc 500 & nexc 1000 capacity water tank

S& F Viterious china toilet paper holder colour all as specified and as directed

S&F Grating square 100 mm size of Stainless steel (Minimum weight 100gms)

Taking up or down 15 mm dia steel tubing and connection and removal at site directed by Engr-In Charge.

Taking up or down 20 mm dia steel tubing and connection and removal at site directed by Engr-In Charge.

Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed.

Refixing old 15mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

Refixing old 20mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

Refixing old 25mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of oil emulsion distemper (tint as approved by GE) complete all as specified & directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE) including complete removal of existing surface with sand paper or iron patti / flat complete all as specified.

Complete removal of existing traetment of wall and treated with 3mm of wall care putty and applying two coat of oil bound distemper (tint as approved by GE) complete all as specified.

Material & labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Material & labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) complete all as specified & directed.

M & L including preparing old roof covering steel surfaces (corrugated roof sheets) of any type of treatment surfaces incl washing and cleaning etc. to steel and iron surfaces and applying one coats of synthetic enamel roof paint complete all as specified.

Material & labour for preparation of old painted wood based weather boarding/ plywood/ AC board as in ceiling surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Material & labour for preparation of old wood or wood based surfaces of any description not otherwise described of any width or girth, and applying first quality french polish one or more coats (for achiving glossy finish) incl a coat of filler complete all as specified & directed.

Dismantling ceiling boards (fibre,plup insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed by Engr-In- Charge.

Material and labour for false ceiling with one layer of 'Lagap' standard boards manufactures by M/S Lafarge board Gypsum India Pvt Ltd at all height and levels standard boards of size 1220x1830x12.5mm standard board to be laid on 'LaGap universal channel (web 45mm premanufactures specifications metal thickness (BMT) 0.55 mm and length 3660 mm to be used as main channel as well as ceiling channel (Size of web 28mm flange 18/30 mm and length 3660 mm MBT 0.55 mm , and L angle (Length 3050 mm MBT 0.55mm )with using 5 mm dia GI wire adjustable suspended clip and finally the board are to be jointed and finished so as to have a flush look with which includes filling and finishing the tepered and square edges of the board with 'LaGyp' easy joint Gypsum based jointing compound "LaGyp" paper tape Complete all as per manufactures instructions and as per directed by Engr-In-Charge. The rate shouled include providing and laying two or more coats of oil bound distemper to give a neat and even finish including preparing the base with primor and scaffolding etc complete in all respect complete all as specified and as directed by Engr-In-Charge.

M&L for preparation of Newly plastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint (1st quality) with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) over one coat of primer.

S&F 16 mm outer dia 3 layer PP-R Polypropylane random copolymer)pipes SDR 7.4& SDR 11 UV stabilised and antimicrobial welded having thirmal stability for hot and cold water supply including all PP-R & brass thereaded polypropylene random fitting fixed.

S&F 20 mm outer dia 3 layer PP-R Polypropylane random copolymer)pipes SDR 7.4& SDR 11 UV stabilised and antimicrobial welded having thirmal stability for hot and cold water supply including all PP-R & brass thereaded polypropylene random fitting fixed.

Material and labour for water proofing treatment of sunken floor of WCs, bathroom etc. by applying of the following specifications :- (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose/unsound material, dirt, dust, etc. (ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydroproof Xtra of FOSROC/Equivalent of Dr Fixit of Pidilite Industries Ltd in the ratio of 1:2:4 (One part of acrylic polymer : Two part of water and four part of cement). (iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222 Litre/Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.111 Litre/Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note :- Joints of WC/Trap/Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work.

Material and labour for plain cement concrete 1:5:10 type E-2 (using 40mm graded broken bricks aggregate) as in foundation, filling and mass concrete, complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

S&F 75mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.

S&F 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.

S & F 110mm bore PVC (SWR) vent cowl.

S&F 110mm dia PVC (SWR) reducer,single,equal or unequal of any length including jointing with solvant cement as required complete all as specified.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified.

S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.

S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.

S&F in repair GI metal suspended ceiling system OREO GI lay in plain of make DEXUNE / HUNTERDOUGLS / LINDER 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62% Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire

S & F CGI sheeting 0.63mm thick with grade of zinc coating 275 as in roof covering fixed with L or J type hooks or self thread making steel screws of length not less than 75mm as directed by Engr-in-Charge at site with suitable arangement as required.

S & F pain galvanised, mild steel sheeting 0.63mm thick with grade of zinc coating 275 as in ridges, hips, valley gutters, drip and straight flashings, fixed with L or J type hooks or self thread making steel screws of length not less than 75mm as directed by Engr-in-Charge at site with suitable arangement as required.

S&F Grating square 150 mm size of PTMT (Minimum weight 100gms)

Supply & fixing PVC cover for water tank capacity exc. 250 litres but n. exc. 500 litres including fixing new MS hinges and staples made for purpose, fixed as in repairs complete all as specified and directed.

Supply & fixing PVC cover for water tank capacity exc. 500 litres but n. exc. 1000 litres including fixing new MS hinges and staples made for purpose, fixed as in repairs complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc in any position complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement) with water proofing compound (External surface), complete all as specified and directed by Engr-In- Charge.

M&L for Rendering 10mm thick on fair faces of brick work or concrete sur faces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces), complete all as specified and directed by Engr-In- Charge.

M&L for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth complete all as specified and directed by Engr-In- Charge.

M&L preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L for preparation of plastered or unplastered new decorated surfaces of ceiling etc.applying three coat of white lime wash complete all as specified and directed by Engr-In- Charge.

Supply only Integral waterproofing compound all as specified as per manafature instruction complete all as specified and directed by Engr-In- Charge.

Supply & fixing in repairs pre-laminated particle board 19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in shelves or shutters or wall panelling, fixed as in repairs complete all as specified and directed by Engineer-in-Charge.

Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed by Engineer-in-Charge.

Supply & fixing magnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed as in repairs complete all as specified and directed by Engineer-in-Charge.

Supply & fixing aluminium hook and eye anodised 150mm size fixed as in repairs complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 4 mm thick, AC plain building boards fixed to timber frame work with screws in ceilings, fixed as in repairs complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparing of new surfaces of AC ceiling boards of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material & Labour for IInd class hard wood fillet square or rectangular in section clean sawn screwed with nails or brads of sectional area exc 13 Sqcm but not exc 25 Sqcm, fixed as in repair complete all as specified and directed by Engineer-in-Charge.

Supply & fixing stainless steel plate rack, made out of 1.00mm thick sheet of size 24"x36"x10" deep, ISI marked, fixed as in repairs complete all as specified and directed.

Supply & fixing viterous china wash down water closet pan (pedestal patten) with cistern, seat cover, internal fittings(twin flush) combo type coloured complete and making all necessary connection to make the system fully functional, fixed as in repairs complete all as specified.

S&F aluminium flat sections as in wind tie.

Demolition of reinforced cement concret (reinforced cut as required to facilited demolition

M & L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in shelves / slabs and like with and incl use and waste of necessary form work complete all as specified.

M & L MS TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Demolition of stone slabs and tiles (chequered tiles) of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.

M&L machine cut Granite slab 15 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

M&L for Green marble flooring or on cooking platform 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick cement screed bed in CM(1:6) complete all as specified. ( size of the slabs shalll not be less than 100cmx60cm ) Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/ edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

Roughening surface of old concrete by picking,sweeping clean and washing down eith water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm. Complete all as specified and directed.

M& L for Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed.

M& L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed eith pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M& for repair to roof lekage by using 100mm wide STP flash strip complete all as specified and directed by Engr-In- Charge.

M& for repair to roof lekage by using 50mm wide STP flash strip complete all as specified and directed by Engr-In- Charge.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick ( below or above GL) complete all as specified and directed.

Material & Labour for 50mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

PCC (1:3:6) type C2 using 40mm graded agg as in surface channel / drains including necessary formwork complete all as specified and as directed.

Extra for forming fair finished drain or channel 60 cm inner girth in forms, moulds/stopped ends etc.

Amount of credit of Rs. 74747.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Durga Construction

RAJESH BUILDERS

M/S Lekh Ram Sharma and Sons

S.R.AND CO.

Arsh Builder

R. P. Suppliers and Construction Co.

M/s Parmod Kumar