SPECIAL REPAIR TO ACCN, COOK HOUSES, TOILET AND ADM COMPLEX AT KHANPUR CAMP UNDER GE (SOUTH), DELHI CANTT-10

Amount

Dismantling asbestos cement (corrugated ,semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in not covering /cladding to wall , fixed with self tapping screws as specified as in roof covering and ridges complete all as specified and directed.

Demolition of brick wok built in cement mortor including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L burnt brick work with sub class 'B' old size bricks, built in CM(1:6) straight or curved on plan exc 6m mean radius complete all as specified.

M&L burnt brickwork with sub class 'B' bricks, of class designation 7.5N, straight or curved on plan to any radius, in half brick thick walls, built in CM (1:4.) complete all as specified.

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) complete all as specified and directed.

M&L for 25mm thick cement concrete type BO 1:2:4 using 12.5mm graded aggregate in floors complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick in flooring over and including 20 mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per Srl item No 8 here-in-before but on vertical surfaces of walls including 10 mm thick backing coat in CM 1:4 as in skirting

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of CM (1:4), complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

All as per item No 14 here in before but as in skirting laid over and including 10mm thick backing coat of CM (1:4)

M&L 40mm thick PCC flooring 1:2:4 type B1 using 20mm graded stone agg finished even & smooth without using extra cement complete all as specified and directed.

S&F in repair vitreous china squatting pan, (Orissa pattern) size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap etc complete including making good to floor complete all as specified and directed.

M&L for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32MM X 600 MM long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified and directed. (Note - WHB will be supported on angle iron of size 50x50x5mm duly painted with two coats of synthetic enamel paint for securing WHB).

S&F pillar taps 15 mm, CP/brass with capstan heads, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specially provided for Complete all as specified and directed.

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and directed.

Supply only water proofing compound mixed with cement concrete, cement plaster all as specified and directed. (ISI Marked.)

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade other than white and black complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps cooking platefom,and other similar situations complete all as specified and as directed

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified.

S&F in repairs PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repairs CP connection 15 mm size with brass nut of length 600 mm complete all as specified and directed.

S&F in repairs brass CP mixer fancy for mixing hot & cold water screwed down for iron pipe of 15 mm bore pipe complete all with complete assembly as specified and directed.

S&F in repairs elegent bathroom PVC mirror cabinet of size 14"x18"x4" (PTMT alloy) complete all as specified.

S&F Chromium plated soap dish with screw complete all as specified and directed.

S&F aluminium Peg set of 3 pegs as per sample complete all as specified and directed.

M&L Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F PVC laminated GI wire 2.00mm dia for cloth drying with fastener as per site requirement complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20 mm dia D type , 60 cm long between flanges complete all as specified and directed.

S&F 15 mm bore concussive push button taps of cast copper alloy, screwed for iron pipe and fixed in repairs complete all as specified and directed.

S&F Fixed in repair Vitreous China Urinal, full stall type,including fixing long screw and urinal speader PTMT of any colour fixing 15mm dia etc complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of size 125 mm with arms including fixing to steel pipe complete all as specified and directed.

S&F in repairs bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair Conceeled stop cock,15 mm bore, chromium plated ,with long shank and cup, fancy type,complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated angle valve screwed at ends including necessary extention piece and fixed complete all as specified and directed.

S&F in repairs Cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm in cement concrete type B1 (1:2:4) complete all as specified.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair PVC waste pipe 32/40 mm bore, 65 cm long complete all as specified and directed.

S&F in repair staianless plate rack AISI 316 grade made of 1mm thick stainless steel sheet of size 775 mm x 900 mm x 250mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE's office complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each ,removing from store complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each removing from store complete all as specified and directed.

S&F mild steel work such as in door Chowekats,, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for Cement concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) type C-0, 1:3:6 (using 12.50 mm graded agregate) complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling and fixing in opening as per specification and drawing, complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing, complete all as specified and directed

S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made 35mm thick glazed and skelton shutters of IInd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edge of framming plain chamfered, or rounded, fitted with cut and mitred beads for securing glass etc, size of member of shutters as specified in SSR part I, section 8, clause 8.20(a) , supplied and fitted to chowkhats, complete all as specified and directed

M&L for preparation of new wood surface of any description and apply two coat of synthetic enamel paint over a coat of pink primer over 10 Sq cm width or girth, complete all as specified and directed

M&L preparation of old painted surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type anodised complete all as specified.

S&F Butt hinges , medium weight , cold rolled , mild steel , 100 mm long with welding to frame supplied and fixed complete all as specified and directed.

S&F Butt hinges , medium weight , cold rolled , mild steel , 75 mm long with welding to frame supplied and fixed complete all as specified and directed.

S&F300mm aluminium anodised sliding door bolts with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast alumnium alloy and fixed complete all as specified and directed.

S&F in repair, aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified.

S&F in repair, aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified.

S&F in repair 150 mm size aluminium handles, cast type anodised complete all as specified.

S&F in repair Butt hinges , medium weight , cold rolled , mild steel , 100 mm long with welding to frame supplied and fixed complete all as specified and directed.

S&F in repair 300mm aluminium anodised sliding door bolts with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixinf bolt and sliding bolts of extruded section or cast alumnium alloy and fixed complete all as specified and directed.

S&F galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.00mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed

S&F in repair galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.00mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed

S & F in repair for mild steel, 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparing old decorated steel surfaces of any description not otherwise described over 10 cm width or girth & applying two coat of synthetic enamel paint of any colour complete all as specified and directed.

M&L preparation of newly surfaces of steel of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S& F in repairs factory made PVC cupboard frame of size 75 mm x 40 mm with a wall thikness of 4mm , made out of extruded 4 mm thick prelam PVC sheet of density 600 / cbm manufactured by an ISO -9001-2015 certified company , reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos of 150 mm long brackets of 10 mm x 10 mm MS Square tubes .The door frame shall be fixed to wall using 65 /100 long MS screws to be provided for each vertical member and minimum of 2 nos of screw to be provided horizontal member etc complete all as specified and directed.

S&F factory made PVC flush type shutter and partition of 18 mm thickness with one side lamination & other side balancing lamination sheet consisting of Carcass 18mm thick PVC sheet of density 600 / cbm manufactured by an ISO -9001-2015 certified company ,and all required brackets 5.5 screw etc. The panell shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specificationmentioned as per drawing including necessary fittings, locking and fixing arrangement ie piano hinges, handles, magnetic catches etc complete all as specified and directed

S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed.

S&F stainless steel of AISI 304 grade floor door stopper with hard drawn steel spring 140 mm long etc complete all as specified and directed

S&F, MS drapery curtain rods, stainless steel 30mm dia of approved quility with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 nos(min) match up rings etc complete all as specified (Make: As per sample)

M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement, complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15mm bore galvanised iron pipe medium grade with all fittings fixed to wall and ceiling or laid in floor including taking down of old GI pipes and connections complete all as directed.

S&F 20 mm bore galvanised iron pipe medium grade with all fittings fixed to wall and ceiling or laid in floor including taking down of old GI pipes and connections complete all as directed.

S&F 32 mm bore galvanised iron pipe medium grade with all fittings fixed to wall and ceiling or laid in floor including taking down of old GI pipes and connections complete all as directed.

S&F 50 mm bore galvanised iron pipe medium grade in short length with all fittings fixed to wall and ceiling or laid in floor including taking down of old GI pipes and connections complete all as directed.

Refixing of old steel tubing and connection in new or old position (Wall/Ceiling etc) incl cleaning for refixing, bore of pipe 15 mm dia including taking down of old GI pipes and connections complete all as specified and directed.

Refixing of old steel tubing and connection in new or old position (Wall/Ceiling etc) incl cleaning for refixing, bore of pipe 20 mm dia including taking down of old GI pipes and connections complete all as specified and directed.

Refixing of old steel tubing and connection in new or old position (Wall/Ceiling etc) incl cleaning for refixing, bore of pipe 50 mm dia including taking down of old GI pipes and connections complete all as specified and directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part II.complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete.

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed complete all as specified and directed.

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to walls of 100 mm dia sand cast pipe complete all as specified and directed.

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or floors of 100 mm dia sand cast pipe complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 100mm bore including packing under and haunching against sides of pipes after they are laid and tested. complete all as specified and directed.

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to walls of 75 mm dia sand cast pipe complete all as specified and directed.

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or floors of 75 mm dia sand cast pipe complete all as specified and directed.

M&L concrete bed to 75 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified.

S & F in repairs CI Bends with access door (any radius), diminishing pieces or tapers of 100 mm dia without oval access door complete all as specified.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified.

S & F in repairs Cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints, fitted with oval access doors complete all as specified and directed.

S & F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete all as specified and directed.

S & F 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified and directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete all as specified and directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes complete all as specified and directed.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, of 110 mm dia complete all as specified and directed.

S&F for PVC (SWR) bends any radius 110mm dia bore complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar (1: 4) mixed with water proofing compound on faces of brick work or concrete surfaces, finished even and smooth using extra cement complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1: 3 on concrete surfaces of ceiling,chajja,etc finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) with waterproofing wall care putty complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and directed.

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty complete all as specified and directed.

M&L for preparation by complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and old plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including wall care putty complete all as specified and directed.

Complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and preparing old plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for applying two coat of white wash on ceiling of old surfaces including preparation of ceiling surfaces complete all as specified and directed.

S&F 6 mm thick glass corner shelf (Single shelf) of best quility with CP steel railing of size (250mmx250mm) of best quality complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Steel work in tublar trusses, posts raffers, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS - 1161- 1979 Gde ST -240 complete all as specified and directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base complete all as specified and directed.

M & L Machine pressed pre cast concrete inter locking paver block 60mm thick M-35 grade with grey cement and pigment & glossy finished any shape colour, size complete all as specified and directed.

M&L for sand cushion under layer of floor complete all as specified and directed.

M & L for removing excavated soils exc. 500m and and n. ecx 500 mtr depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Cutting of trees including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified.

S&F as in repair for welding of 100mm size butt hinges medium wt cold rolled MS incl taking down shutter and refixing in same position and making good/functional incl supply of butt hinges complete all as specified and directed.

Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exec 0.5 sqm each pane complete all as specified and directed.

All as per Srl item No 136 here-in-before but figured glass pin head and glazing with oil putty.

M & L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperature 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas,fins, facias, parapets, Lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs including finishes as existing complete all as specified & directed

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F for 6mm thick non asbestos fibre cement plain building boards in ceiling & wall, fixed in ceiling, flat or sloping to steel frame with screws complete all as specified and directed.

Fixing only for non asbestos cement plain building boards in ceiling & wall, fixed in ceiling, flat or sloping to steel frame with screws complete all as specified and directed.

M&L cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, coping, benching, roof kerb or mud stops, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, apex stones, including form work to concrete surfaces complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material /demolition material exc. 1.50 km but n exc.5 km complete all as specified and directed.

Taking down cement plaster of any descreption on brick/stone or concrete surfaces of roof including racking out joints, hacking for key scrubbing down with water etc on roof, complete all as specified and directed.

M&L 15mm thick plaster on concrete surfaces i.e. RCC roof top, in CM (1:3) finished even and smooth surface without using extra cement but mixing water proofing compound at the rate of 2% of cement by weight complete all as specified and directed. (Note:- WPC will be measured and paid for separately)

Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of mud in roof, any thickness, including plastering and leeping incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as directed

M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm on existing surfaces complete all as specified and directed.

M&L 50 mm thick (average thickness) plain cement concrete 1:2:4 type B-0 using (12.5 mm graded aggregate), as in roof, padding to maintain the uniform slope complete all as specified and directed.

M&L for cement concrete tiles 25cmx25cmx22mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3. complete all as specified and directed

S&F APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5kg/sqm of make as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid oer compatible bitumen primer at the rate of 0.40 ltr/sqm torching overlaps with a propane or butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of emulsion bituminous primer all as per manufacture's instructions including preparation of surface by removing the existing treatment, complete all as per specified and directed. Note:- (i) Polymeric membrane shall be taken to a heigh of 60cm (minimum) and then inserted inside the groove parapet wall and shall be finished by the membrance flushing. (ii) The water proofing treatment shall be got carried out by the manufacturer or their authorized applicators.

S&F Steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars & wiremesh both, dovetailed or welded with one shop coat of red oxide primer, and two coat of synthetic enamel paint, complete all as specified and directed. (Note:- Drg No CEDZ/TD/ARCH/08/dt1/6 to 6/6 shall be received for this item)

S&F for Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M&F re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height, using synthetic enamel paint of colour as approved by GE complete all as specified and directed.

S&F anodized aluminium snap grid frame (with min 50 micron uniform anodized coating) size of grid as 605x605mm, consisting of Tee/Angel section of size 40x40x2mm as approved make conforming to IS 733 in frame of false ceiling including aluminium cleats with necessary CP brass/stainless steel shank screws. Aluminium perimeter angle fixed to wall /steel frame at centre to centre and fixing frames to level adjusting anchores of 8mm dia GI wire with hook in Tee members at spacing of 1.5m centre to centre, fixed to steel truss roof, false ceiling board fixed or laid/inserted to aluminium frame with screws in ceiling complete all as specified and directed.

M&L ATT along the external wall and inside sufaces below the concrete work, masonary work using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging holes etc complete all as specified and directed.

M&L providing ATT of soil under existing floors using emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with CM 1:2(1cement :2 coarse sand) to match the existing floors complete all as specified and directed.

Description of Work / Item(s)

Amount

Taking down carefully the old u/s Aluminium/ Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish all as specified and directed.

M&L for point wiring complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including concealed PVC conduit medium grade and Modular sunken pressed steel terminal box 2 mm thick required size including modular plate and modular flush box in different module with all accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified for following :- Note 01:- the rate is inclusive of cutting/chasing and making good the disturbed surface with CM 1:3 and the same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete. (a) One light /fan point controlled by one way switch

(b) One 3 pin socket outlet 5 amps independent board

(c) One 3 pin socket outlet 5 amps point on same board

(d) One 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

M&L for point wiring complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including PVC conduit medium grade on surface and Modular sunken pressed steel terminal box 2 mm thick required size including modular plate and modular flush box in different module with all accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified for following :- (a) One light /fan point controlled by one way switch

(b) One 3 pin socket outlet 5 amps independent board

(c) One 3 pin socket outlet 5 amps point on same board

(d) One 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

S&F in replacement switch 6 Amps modular type, 1M with red indication, single pole one way, ISI marked complete all as specified.

S&F in replacement socket 6 Amps,2/3 pin combined modular type 2M ,shuttered type, ISI marked complete all as specified.

S&F in replacement switch 16 Amps, modular type 1M with red indication single pole one way, ISI marked complete all as specified.

S&F in replacement socket 6/16 Amps 2/3 pin combined modular type 2M,shuttered type , ISI marked complete all as specified.

S&F in replacement ceiling rose surface two to three terminals, ISI marked complete all as specified.

S&F surface mounting LED Integrated Aluminium Batten luminarie Polycarbonate co-extusion tube for not less than 18W LED light(4 ft) housing. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S&F surface mounting LED Integrated Aluminium Batten luminarie Polycarbonate co-extusion tube for not less than 9W LED light(2ft) housing. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S&F in replacement for Batten holder with PVC body and back plate suitable for LED Bulb B-22 cap complete all as specified.

S & F in replacement LED RETROFIT Lamp of not less than 9 watt having minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac for fixing in batten holder complete all as specified.

S&F surface mounting LED building security light fitting fitted in high pressure die cast aluminium housing not less than 18W including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut bolts & washer etc. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 ,THD<10% @ 240v Ac with IP 66 protection. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed including taking down old ceiling fan and depositing to MES store yard.

Supply,installation,testing & comissioning of 300 mm sqweep exhaust fan,having 1400 rpm speed,90 watt,1600 CMH steel body AC single Phase. 230V with, blades, and frame and louvers including making of holes of suitable size & taking down old exhaust fan and depositing to MES store yard. complete all as specified & directed

Supply,installation,testing & comissioning of 450 mm sqweep exhaust fan,having 1400 rpm speed,410 watt,6120 CMH steel body AC single Phase. 230V with, blades, and frame and louvers including making of holes of suitable size & taking down old exhaust fan and depositing to MES store yard. complete all as specified & directed

S&F of Hot water storage(Geyser)25 Ltrs capacity,BEE 5 star rated,vertical type with suitable size of fastner and incl provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar presuure, having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element including taking down old unserviceable 25 liter geyser and depositing safely in MES storeyard complete all as specified and directed.

Supply & Fixing in replacement sheet metal enclousure for DB's where MCB's to be used Single pole and Neutral 12 way ,240 volts, double door bus bar neutral link,earth bar and din rail complete all as specified.

Supply & Fixing in replacement sheet metal enclousure for DB's where MCB's to be used Single pole and Neutral 4 way ,240 volts, double door bus bar neutral link,earth bar and din rail complete all as specified.

Supply & Fixing in replacement MCB SPN 63 Amps,10 KA, 'C' curve 240 volts complete all as specified.

Supply & Fixing in replacement MCB SP 6 to 32 Amps,10KA,'C' curve 240 volts complete all as specified.

M&L in replacement of earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI earth lead wire 4.0 mm as earthing leads by means of bolts, nuts, check nuts and washers all joints as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed at site.

Description of Work / Item(s)

Amount

M & L for laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm x 2 core all as specified and directed by Engr-in-Charge.

M & L for laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm x 3.5 core all as specified and directed by Engr-in-Charge.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays including taking out of old XLPE cables of any size complete all as specified and directed.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable.

Supply and laying sub class ‘B’ bricks well burnt for cable protections laid flat with length equal to width of brick over cable perpendicular to length of cable complete all as specified and directed by Engr-in-Charge

Supply, installation, testing and commissioning, in replacement, of Junction box Outdoor type, cubical, factory made, dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, and mild steel angle iron frame complete with openable shutters in front and having proper locking arrangement including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC. Panel shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and pre wired with suitable size of PVC insulated sheathed copper conductor cable complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :-

INCOMING

(a) MCCB 4 Pole 63 Amp 415 volts 16 KA =01No

(b) Aluminium bus bar 100 Amps with insulator-04 Nos

(c) CT ratio of suitable size-01 set (set of three)

(d) Indication lamp – one set(set of three)

OUTGOING

(i) MCB SPN 32 Amps - 06 Nos

Note : Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanised iron strip 25x4 mm by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to Transformer / Poles all as specified or indicated including testing on complete all as specified and as directed by Engineer-in-Charge.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing/connecting as required 25x4 mm galvanised iron strip complete all as specified and directed by Engr-in-charge.

Supply, laying and testing HDPE pipe of size 40 mm (1.5") bore fixed to walls and ceilings or laid in trenches all as specified and directed Note:-The rate is inclusive of PCC work and making good the disturbed surface of ceiling ,wall, road etc.

The new hut furnitures

M/S Chhavi Constructions Co

JYOTI ENTERPRISES

VED PRAKASH ARORA

M/S Yamin

Shivom Projects Private limited

M/s KUMAR BUILDERS

M/S Parshant Associates

V r traders

The new hut furnitures

M/S Chhavi Constructions Co

JYOTI ENTERPRISES

Shivom Projects Private limited

M/S Yamin

VED PRAKASH ARORA

M/s KUMAR BUILDERS

V r traders

The new hut furnitures

M/S Yamin

VED PRAKASH ARORA

M/s KUMAR BUILDERS

JYOTI ENTERPRISES

Shivom Projects Private limited

M/S Chhavi Constructions Co

Bidder Name

M/S Yamin

The new hut furnitures

V r traders

VED PRAKASH ARORA

M/S Parshant Associates

M/s KUMAR BUILDERS

Shivom Projects Private limited

M/S Chhavi Constructions Co

JYOTI ENTERPRISES