REPAIR/REPLACEMENT OF DEFECTIVE PARTS OF DG SETS, AMF PANEL,DEFECTIVE ELECTRIC WIRING, EXHAUST FANS, STREET LIGHTS AND CONNECTED MISC WORKS AT AFS MADH ISLAND UNDER GE AF THANE

Amount

Taking down carefully old copper/aluminium point wiring and removing from site such as (Light,fan socket or power) complete ,including fitting and fixtures,fan regulators switch boards,switches,ceiling roses, lamp holder from existing batten PVC conduit/concealed conduit / PVC casing capping wiring complete excluding light fittings and fans including making good to the disturbed surfaces to match with existing surfaces complete all as specified and directed by Engr-in-charge.

Taking down old main Switches,MCB DB with MCBs including making good to the disturbed surfaces to match with existing surfaces complete all as specified and directed by Engr-in-charge.

Taking down old sub main wiring of any sizes including making good to the disturbed surfaces to match with existing surfaces complete all as specified and directed by Engr-in-charge.

Material and Labour for point wiring with FRLS insulated sheathed 1100 Volts grade single core stranded copper conductor cable 1.5 Sqmm drawn through existing PVC concealed conduit, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity FRLS insulated sheathed 1100 Volts grade stranded copper conductor cable of size 1.5 Sqmm green colour connected to common earth dolly including pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws for the followings complete all as specified and directed by Engineer-in-charge:- (i) One light / fan point controlled by one way switch 5 Amps

(ii) One socket outlet 5 Amps on independent board

(iii) One socket outlet 5 Amps on the same board

(iv) One bell point controlled by one bell push 5 Amps.

(v) Ditto all as per item No 4 here -in- before but for wiring with FRLS insulated sheathed 1100 Volts grade single core stranded copper conductor cable 2.5 Sqmm for socket point of 15 Amps independent complete all as specified and directed by Engineer-in-charge:-

Material and Labour for point wiring with FRLS insulated sheathed 1100 Volts grade single core stranded copper conductor cable 1.5 Sqmm drawn PVC casing & capping, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity FRLS insulated sheathed 1100 Volts grade stranded copper conductor cable of size 1.5 Sqmm green colour connected to common earth dolly including pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws for the followings complete all as specified and directed by Engineer-in-charge:- (i) One light / fan point controlled by one way switch 5 Amps

(ii) One socket outlet 5 Amps on independent board

(iii) One socket outlet 5 Amps on the same board

(iv) One call bell point controlled by one bell push 5 Amps

(v) Ditto all as per item No 9 here -in- before but for wiring with FRLS insulated sheathed 1100 Volts grade single core stranded copper conductor cable 2.5 Sqmm for socket point of 15 Amps independent complete all as specified and directed by Engineer-in-charge

Supply and fixing in repairs Switch piano flush type single pole one way 5 Amps 230 volts complete all as specified and directed

Supply and fixing in repairs Ceiling rose surface bakelite two to three terminal 230 volts complete all as specified and directed

Supply and fixing in repairs Bell push flush type 5 Amps complete all as specified and directed .

Supply and fixing in repairs call Bell 230 volts single pole AC complete all as specified and directed

Supply and fixing in repairs Switch socket combined two in one 06 pin 5/15 Amps flush type universal complete all as specified and directed .

Supply and fixing in repairs of Switch Socket multipurpose 5 pin 5 Amps 240 V flush type complete all as specified and directed .

Supply and fixing in repairs Lamp holder,insulated body with back plate for bittern fitting complete all as specified and directed .

S&F in repairs of 3 pin 15 Amps plug Top 230 volts complete all as specified and directed.

S&F in repairs of 3 pin 5 Amps plug Top 230 volts complete all as specified and directed.

S&F in repairs of Modular Switch 1 way 6A, 1 Module complete all as specified and directed.

S&F in repairs of Modular Switch 1 way 16A, 1 Module complete all as specified and directed.

S&F in repairs of Modular Bell Push 6A 1 Module complete all as specified and directed.

S&F in repairs of Modular Sockets 6A - 2/3 pin Combined 2 module complete all as specified and directed.

S&F in repairs of Modular Sockets 6A/16A - 2/3 pin Combined 2 module complete all as specified and directed.

S&F in repairs of Modular Fan Regulator, 120W - 2 module complete all as specified and directed.

S&F in repairs of Modular white cover plate with frame 2 module complete all as specified and directed.

S&F in repairs of Modular white cover plate with frame 4 module complete all as specified and directed.

S&F in repairs of Modular white cover plate with frame 6 module complete all as specified and directed..

S&F in repairs of MCB DB SPN 4 Way Double door type 240 Volts complete all as specified and directed.

S&F in repairs of MCB DB SPN 8 Way Double door type 240 Volts complete all as specified and directed.

S&F in replacement of MCB DB SPN 12 Way Double door type 240 Volts complete all as specified and directed.

S&F in repairs of MCB DB TPN 4 Way double door type 415 V complete all as specified and directed.

S&F in repairs of MCB Isolator Four pole 63 Amps 415 Volts complete all as specified and directed.

S&F in repairs of MCB SP 06 to 32 Amps 240 Volts complete all as specified and directed.

S&F in repairs of Isolator DP 32 Amps 240 Volts complete all as specified and directed.

S&F in repairs of Isolator SPN 40 Amps 240 Volts complete all as specified and directed.

S&F in repairs of single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring complete with two run of 4.0 Sqmm PVC insulated and PVC unsheathed 1100 Volt grade with multistranded copper conductor cable with and including drawn through PVC conduit/casing capping with all accessories fixed on Walls/floors/roofs with and including provision of 2.5 sqmm PVC insulated copper wire as earth continuity conductor and connecting to common earth dolly all as specified by Engr-in-Charge. Note:- Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit.

M & L for submain wiring complete with two run of 6 Sqmm PVC insulated FR multistranded flexible copper conductor cable drawn in through PVC conduit/casing capping complete with all accessories including provision of 4.0 sq mm PVC insulated copper wire as earth continuity conductor all as specified and as directed by Engr-in-Charge. Note:- Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit.

S&F in repairs of Switch Flame Proof rotary type with termination box in LM6, 16A, single 250V complete all as specified and directed.

S&F in repairs of flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A ,250V complete all as specified and directed

Providing suitable technician with assistant for attending day to day complaints at various building and location inside of AFS Madh Island including taking down the unserviceable/defective internal electrical fittings and fixtures and to rectified satisfactory, including refixing or replace the new items/spares in existing position including testing after repair complete all as directed. NOTE :- (a) Necessary spares, fittings and fixture will be provided/arranged by department. (b) Necessary tools, ladder, safety equipment for Technician shall be arranged by tendere inclusive of quoted rates.

Preventive maintenance and safety checking of the following fan of any size/make after taking down from original position, checking the serviceability of safety pins, clamps, down rods, rubber bushes, nuts, bolts, canopies, oscillation mechanism, Ball bearing, Gun metal bush, winding conditions and electric connection etc. reconnecting/re hanging/re-fixing in original position after oiling & greasing , ,reconnecting the cables and testing all as specified and directed by Engr-in-charge. Note:- (i) Defective/unserviceable part like safety pins, clamps, down rods, rubber ushes, nuts, bolts, canopies, oscillation mechanism, Ball bearing, Gun metal bush, winding etc will be measured and paid separately (ii) Rewinding /overhauling of fans measured separately. (iii) Contractor shall maintain a record and obtain users sign for confirmation of main carried out.

(a) Ceiling fan 1200/1400mm sweep

(b) Exhaust fan 300/450 sweep

(c) Wall mounted fan 400 sweep

(d) Pedestal fan 400 sweep

Material and labour for painting of ceiling fan of any sweep with blades, down rod for any size and type,scraping out of old paint, filling of cavities with filler preparation of body painting by spray with first quality synthetic enamel paint and writing of MES number complete all as directed by Engr-in-Charge.

Material and Labour for painting of exhaust fan of any size with louvers, scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint over a coat of zinc primer and writing of MES number including complete all as directed by Engr-in-Charge.

Material and Labour for painting of pedestal fan of any size and type,scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint and writing of MES number complete all as directed by Engr-in-Charge.

Material and Labour for painting of wall mounted fan of any size and type,scraping out of old paint filling of cavities with filler preparation of body and cleaning of dust etc and painting by spray with first quality synthetic enamel paint and writing of MES number complete all as directed by Engr-in-Charge.

Material and Labour for dismantling and opening of stator and rotor, cutting and removing burnt unserviceable winding wire from slots, cleaning of slots, rewinding with super enameled copper insulated wire as per existing gauge, varnishing, heating assembling with wire stator coil to connector block and pre-wire for connector block to ceiling rose suitable size PVC insulated sheathed 1100 Volts grade 3 core 1.5sqmm flexible round insulated stranded copper conductors cable required at site condition and testing complete all as directed by Engr-in- Charge for the following sweep fans :- a) Ceiling fan of 1200 mm sweep

b) Ceiling fan of 1400 mm sweep

c) Exhaust fan of 300 mm sweep

d) Exhaust fan of 450 mm sweep

e) Wall Mounted fan of 400 mm sweep

f) Pedestal fan of 400 mm sweep

Supply only Capacitor 2.5 Mfd/3.15 Mfd 230 volts 50Hz complete all as directed by Engineer-in-Charge MAKE : KELTRON/APCOS/PARAG/SARADA

Supply only Capacitor 4.0 Mfd 230 volts 50Hz complete all as directed by Engineer-in-Charge MAKE : KELTRON/APCOS/PARAG/SARADA

Supply only down rod of 300 mm long suitable for ceiling fan complete all as directed by Engineer-in- charge.

Supply only down rod of 600 mm long suitable for ceiling fan complete all as directed by Engineer-in-Charge.

Supply only down rod of 1.0 Mtrs long suitable for ceiling fan complete all as directed by Engineer-in-Charge.

Supply only Ball bearing suitable for ceiling fan with Cat part No 6201/6202 complete all as directed by Engineer-in-Charge MAKE : SKF,TATA,NBC

Supply only Ball bearing for Wall Fan/ pedestal fan of any size or sweep complete all as directed by Engineer-in-charge MAKE : SKF,TATA,NBC

Supply only Ball bearing suitable for exhaust fan of 300 mm /450 mm sweep/size complete all as directed by Engineer-in-charge.MAKE : SKF,TATA,NBC

Supply only Gun Metal bush suitable for ceiling fan, exhaust fan etc complete all as directed by Engineer-in- charge

Supply only blade made of aluminium and suitable to existing colour/size of ceiling fan 1200/1400 mm sweep including bolts and washers complete all as directed by Engineer-in-charge Make : Bajaj/Crompton/Orient /Usha

Supply only blade made of cast iron suitable to existing colour/size of exhaust fan 300 mm sweep with nut, bolt, washers complete all as directed by Engineer-in-charge. Make : Bajaj/Shakti/Crompton

Supply only blade made of cast iron suitable to existing colour/size of exhaust fan 450 mm sweep including nut, bolt,washers complete all as directed by Engineer-in-charge.Make : Bajaj/Shakti/Crompton

Supply only blade made of aluminium/ PVC body suitable to existing colour/size of wall mounted/pedestal fan 400 mm sweep including suitable size bolts complete all as directed by Engineer-in-charge. Make : Bajaj/Shakti/Crompton/Usha

Supply only canopy made of PVC body suitable for existing ceiling fan/wall mounted/pedestal fan complete all as directed by Engineer-in-charge.

Supply only bracket with frame nut,bolt,rubbers etc suitable for exhaust 300 mm sweep complete all as specified and directed.

Supply only bracket with frame Nut,Bolt,Rubbers etc suitable for exhaust 450mm sweep complete all as specified and directed.

Supply & Fixing in repair of Electronic Regulator Step down type 230 volts, AC, 50Hz including taking out unserviceable regulator of any type complete all directed by Engineer--in-charge Make- Anchor/Cona/Legrand/KakiI

Supply and fixing in repairs of electronic dimmers, 450 watt, 240 volt, flush type on the existing phenolic/ Hylum laminated sheet as site requirement complete all as directed by Engineer-in-charge.Make : Anchor/Cona/Legrand/Kalki

Supply & fixing in repair of Exhaust Fan louvers of size 450 mm sweep as per sample of metal body with nut bolt and washers and anchor fastner for fixing complete all as directed by Engineer-in-Charge. Make : Bajaj/Shakti/Crompton

Supply & Fixing in repair of Exhaust fan louvers of size 300 mm sweep as per sample of metal body complete all as directed by Engineer-in-Charge. Make : Bajaj/Shakti/Crompton

Supply and fixing in repairs of Anchor fastner for hanging of ceiling Fan and necessary fittings complete all as directed by Engineer-in-Charge.

Supply only hanging clamps, nut, bolts washers, spring washers, split safety pin and rubber real suitable for ceiling fan complete all as directed by Engineer-in- Charge

Material and Labour for PVC insulated sheathed flexible type over all round insulated 1100 Volts grade 3 core 1.5sqmm stranded copper conductors cable required at site condition and testing complete all as directed by Engr-in- Charge

Supply only oscillation mechanism suitable for wall mounted fan/pedestal fan complete all as directed by Engr-in- Charge

Excavation in trenches not exceeding 1.5 m wide and not exe 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exe 1.5 M in depth and getting out in hard/dense soil complete all as specified and directed .

Returning filling in including spreading leveling, watering and well ramming in layers not exe 25 cm each layer complete all as specified and directed.

Removing excavated material to a distance not exe 50 M and depositing where directed not exceeding 1.50 M above the starting point complete all as specified and directed.

Supply spreading in trenches dry crushed Stone sand for cable protection and punning down gently by hand all as specified.

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches as specified and as directed.

Supply and fix Galvanized iron steel tubing Light grade of 80mm bore with all fittings as required at site and laid in floors/trenches as in cable protection all as directed by Engineer – in – Charge.

Supply and fix Galvanized iron steel tubing Light grade of 50mm bore with all fittings as required at site and laid in floors/trenches as in cable protection all as directed by Engineer – in – Charge.

Dismantling and Taking down L.T. under ground armored PVC insulated and PVC sheeted heavy duty 1100 Volts grade under ground cable of any size complete all as specified and directed.

Supply and laying in the ground/ saddling through the wall/trenches of cable XLPE Insulated armoured, heavy duty electric power cables (heavy duty) 1100 Volts grade, cross sectional area with stranded aluminium conductor of size 10 sq mm 4 Core complete all as specified and directed.

Supply and laying in the ground/ saddling through the wall/trenches of cable XLPE Insulated armoured, heavy duty electric power cables (heavy duty) 1100 Volts grade, cross sectional area with stranded aluminium conductor of size 16 sq mm 4 Core complete all as specified and directed.

Supply and fixing in repairs/Replacement of of the under mentioned items to be incorporated in street light fittings complete all as specified and directed by Engineer-in-charge (a) LED Driver for 1 x 45 watt LED street light complete of Make -Crompton/Bajaj/Havells

(b) LED Driver for 1 x 60 watt LED street light complete of Make -Crompton/Bajaj/Havells

Supply and fix in repairs LED street light fittings 60 Watts Pressure die cast aluminium housing, heat resistant toughened glass with frame, IP66 protection better optics for uniform distribution make Crompton Cat No. LSTN-60-CDL or equivalent of make Bajaj / Havellscomplete all as specified and as directed

Supply and fix in repairs LED street light fittings 30 Watts Pressure die cast aluminium housing, heat resistant toughened glass with frame, IP66 protection better optics for uniform distribution make Crompton Cat No. LSTN-30-CDL or equivalent of make Bajaj / Havellscomplete all as specified and as directed

S&F copper cable flexible PVC insulated 2x1.5 sqmm single core along with earth wire in PVC conduit from FRP box to street light fitting ,including clamp of MS flat 25 X 4 mm -03 Nos with suitable nuts,bolts and washers etc all as specified and directed by Engr-in-Charge

Supply & Fix in Replacement of GI Bracket made out of 40 mm dia medium grade GI tube up to 1.5 m long bend to shape 115 degree off set shape, fixed with 2 nos of suitable MS Flat clamp of size 40x5 mm with necessary nut bolts & washers and applying two coats of synthetic enameled paint over one coat of zinc oxide primer for clamp complete all as specified and directed.

Material and Labour for painting of steel tubular pole 9 mtr long with one coat of aluminium paint including preparation old surface with scrapping of steel tubular poles Including numbering of pole no with black oil paint ,incl 2 strips of white & yellow paint , alternate upto a height of 1.2 mtrs complete all as specified and directed.

Material and Labour for painting of Pre-stressed concrete pole 9 mtr long with one coat of white colour weatherproof snowsum paint including numbering of pole no with black oil paint ,incl 2 strips of white & yellow paint , alternate upto a height of 1.2 mtrs complete all as specified and directed.

Supply and fix in replacement FRP cable looping box of size 250mm x 150mm x 100mm With connector block 4 Way , 1 Nos of MCB SP 6 Amp 10KA, etc including suitable Brass gland, including provision for connecting earth continuity conductor etc. all as specified and directed Make :- SINTEX / NATIONAL / NATRAJ.

Material and Labour for cement concrete Type C2, 1:3:6 (40 mm graded stone aggregate of 150 mm thickness in foundation filling and mass concrete for filling of road cutting Coping of poles including demolition of existing and making good for disturbed surfaces complete all as specified and directed by Engr-in-charge.

Annual Maintenance Contract for DG Set 250 KVA, Make - Crompton Greaves, through authorised service agency of OEM , Location :(DG SET -1, Near Library Area AFS Madh) complete all as directed by Engineer-in-Charge and others all as specified in Particular Specification

Ditto all as per item No -106 here-in-before but for 125 KVA DG Sets Make:- Kirloskar ( Power House DG -1) complete all as directed by Engineer-in-Charge

Ditto --all as per item No -106 here-in-before but for 125 KVA DG Sets Make:- Kirloskar ( Power House DG-2) complete all as directed by Engineer-in-Charge

Ditto --all as per item No -106 here-in-before but for 82.5 KVA DG Sets Make:- Kirloskar ( AFNET SUB station DG -1) complete all as directed by Engineer-in-Charge

Ditto --all as per item No -106 here-in-before but for 82.5 KVA DG Sets Make:- Kirloskar ( AFNET SUB station DG-2) complete all as directed by Engineer-in-Charge

Ditto --all as per item No -106 here-in-before but for 62.5 KVA DG Set Make:-Crompton Greaves, ( Near SMC Hall station DG -1 ) complete all as directed by Engineer-in-Charge

Draining out the old sludge oil from the DG set and replace with new oil as recommended by Mfg complete all as directed by Engineer-in-Charge. NOTE : Draining out of Oil shall be done twice in year each time refilling/Top up )

Supply and fixing for Industrial Battery of 12 Volt,180 AH capacity suitable for 82.5 to 250 KVA DG Sets heavy duty, 25 plates including removing existing unserviceable battery from existing places and cleaning of battery terminals and clamps properly and refixed and reconnected complete all as directed by Engineer-in-Charge.

Servicing of AMF Panel suitable for 12.5 KVA DG Set to 75 KVA DG Set including cleaning properly with blower, checking of control wiring , replacement of burnt out / damaged wiring connections, calibration of control relay, replacement of control fuses / MCBs all as directed by Engineer in Charge. NOTE :- Spare parts shall be measured and paid separately in respective item of this schedule if required.

Supply only for LED type Indicator indication lamps R,Y,B) complete all as directed by Engineer-in-Charge

Supply only for Push Buttons with element complete all as directed by Engineer-in-Charge Make : L&T or Telimechanic

Supply only for Control relay 9/11 pin 12 /24 volt DC of suitable for 62.5 KVA to 125 KVA DG Set complete all as directed by Engineer-in-Charge.

Supply only for AMF controller for 250 KVA complete all as directed by Engineer-in-Charge Make : Greaves Crompton or equivalent

Supply only for CT of ratio upto 150 / 5 10 VA burdan complete all as directed by Engineer-in-Charge Make:- AE/NIPPON or equivalent

Supply only for HRC fuse 200 Amp complete all as directed by Engineer-in-Charge. Make : L&T/SEIMENS or equivalent

Supply only for PVC insulated & unsheathed signal core multi stranded copper cable of size 4 sq mm for control wiring complete all as directed by Engineer-in-Charge

Supply only for PVC insulated & unsheathed singal core multi stranded copper cable of size 2.5 sq mm for control wiring complete all as directed by Engineer-in-Charge.

Supply only for PVC insulated & unsheathed signal core multi stranded copper cable of size 1.5 sq mm for control wiring complete all as directed by Engineer-in-Charge.

Material and Labour in repairs of Temperature gauge complete all as directed by Engineer-in-Charge.

Supply only for Oil Pressure Guage 0-10 Bar complete all as directed by Engineer-in-Charge.

Supply only for Digital Frequency meter complete all as directed by Engineer-in-Charge.

Supply only for DC Volt meter 0 to 20 volt complete all as directed by Engineer-in-Charge

Supply only for DC Ammeter 0 to 20 Amp complete all as directed by Engineer-in-Charge.

Supply only for Excitation coil for 250 KVA DG set complete all as directed by Engineer-in-Charge.

Supply only for AVR card for 125 KVA DG set complete all as directed by Engineer-in-Charge.

Supply only for AVR card for 82.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only for AVR card for 62.5 KVA DG set complete all as directed by Engineer-in-Charge.

Material and Labour for servicing of Turbo charger including Replacement of Turbo charger kit for capacity 250KVA /125 KVA/82.5KVA/62.5KVA complete all as directed by Engineer-in-Charge.

Material and Labour in Servicing of Self Starter 24 Volt DC for 250 KVA DG Set, dismantling complete,& replacement of solenoid field coils. cleaning the cummutator strips including replacing the bearing, bends pinion re-assembling, connecting and testing complete all as directed by Engr-in-charge.

Ditto all as per item No 169 here-in- before but for capacity 125 KVA DG set complete all as directed by Engr-in-charge.

Ditto all as per item No 169 here-in- before but for capacity 82.5 to 62.5 KVA DG set complete all as directed by Engr-in-charge. .

Material and Labour in repairs of self starter 12 volt DC for 62.5 to 82.5 KVA DG set including all accessories complete all as directed by Engr-in-charge.

Material and Labour for in repairs of Feed Pump for Aquastic DG set for capacity 62.5 to 82.5 KVA complete all as directed by Engr-in-charge. Make -Kirloskar

Dis-connecting the alternator from the engine of capacity 250 KVA by removing the coupling & outgoing cable transporting the alternator to authorized maintenance service center for repairs Cleaning the armature, applying one coat of varnish and heating and assembling the alternator at workshop and testing at NO load, transporting the same to the site , re-connecting the alternator to the engine after proper alignment including testing and commissioning complete all as directed by the Engr-in-Charge.

Ditto all as per item No 174 here-in- before but for 125/ 82.5 KVA DG Sets complete all as directed by Engr-in-charge..

Draining out the Water from engine of capacity 250 KVA the radiator , dis-mantling the leaking radiator assembly from the engine body, transporting to workshop, cutting the bottom chambers, repairing the damaged pipes, brazing the leaking portions ,descaling / clearing all the blocked pipes including repairing the fins, brazing the bottom chambers, testing the radiator for leakages, transporting the same to the site and re-fixing and testing complete in the presence of Engr-in-charge.

Ditto all as per item No 176 here-in- before but for 125 / 82.5 KVA DG Set complete all as directed by Engr-in-charge.

Material and Labour in taking down carefully Old rusted silencer & exhaust pipe from engine scraping & cleaning in side & out side applying one coat of zink primer for out side silencer pipe & providing self adjestive Asbasto Rope 12 mm dia from engine to exhaust pipe and painting with 2 coat of synthetic enameled paint for expose portation of exhaust complete all as directed by Engr-in-charge..

Material and Labour scraping the peeled paint of DG set, preparing the surfaces, cleaning the dust and dirt etc of (alternator and engine) applying 2 coats of synthetic enamel paint of approved shade and writing of MES/SM No on the set all as directed of capacity 250/125/82.5/62.5 KVA complete all as directed by Engr-in-charge..

Supply olny solenoid Switch 12 Volt DC complete all as directed by Engr-in-charge... Make: Kirloskar

Supply only Battery terminal Heavy duty made of brass with nut and bolt including washers suitable for 12 volt DC battery complete all as directed by Engr-in-charge.

Supply only Radiator Hose pipe as per existing set for 62.4/82.5 KVA complete all as directed by Engr-in-charge.

Supply only Door hinges assembly for Aquastic DG set complete all as directed by Engr-in-charge.

Supply only Heavy duty Automatic electronic battery charger suitable for 12/24 Volt DC complete all as directed by Engr-in-charge.

Supply only Ignition Switch for capacity up to 250,125,82.5 KVA DG set complete all as directed by Engr-in-charge...

Supply only solenoid Switch 24 Volt DC for 125/250 KVA DG Set as per existing complete all as directed by Engr-in-charge.

Supply only Coolant premix as manufacturer recommendations and required for top up for Acrostic DG set complete all as directed by Engr-in-charge.

Supply only refilling of distilled water for top up battery 12 volt DC complete all as directed by Engr-in-charge.

Supply only Air Filter inside & out side for capacity 250 KVA DG Set complete all as directed by Engr-in-charge.

Supply only Primary Fuel Filter for capacity 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only Secondary Fuel Filter for capacity 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only Lubricating Oil Filter for capacity 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only Fuel pipes with benjo bolt and washers. For capacity 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only V- Belt as per existing size for capacity 250 KV DG set complete all as directed by Engr-in-charge.

Supply only Air Filter inside & out side for capacity up to 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only Primary Fuel Filter for capacity up to 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only Lubricating Oil Filter for capacity up to 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only Primary Fuel Filter for capacity for 62.5/82.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only Secondary fuel filter for capacity for 62.5/82.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only lubricating Oil Filter for capacity 62.5/82.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only super by pass oil filter for 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only Fuel pipes for capacity up to 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only Vee Belt as per existing size for capacity up to 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only fuel governing controller for 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only Coolant hose set suitable for 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only Coolant hose set suitable for 125 KVA DG set complete all as directed by Engr-in-charge.

Supply only Coolant hose set suitable for 82.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only Coolant hose set suitable for 62.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only Fuel hose set suitable for 250 KVA DG set complete all as directed by Engr-in-charge.

Supply only Fuel hose set suitable for 82.5 KVA DG set complete all as directed by Engr-in-charge.

Supply only Fuel hose set suitable for 62.5 KVA DG set complete all as directed by Engr-in-charge.

venus enterprises