GE/BAS-53/2022-23CERTAIN REPAIRS AND CLEANING OF SEWAGE LINES,MANHOLES, SEPTIC TANKS,SOAKAGE WELL, HARD STANDING AND FENCING AND GATES ETC AT JANGLOTE GRN UNDER GE BASOLI.

Amount

Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of UPVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m, complete all as specified and as directed.

Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of UPVC underground drainage pipe (UDS) type 'B' 200mm dia with thickness 4.5mm (min) and pressure rating SN4 as IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n exc 50m, complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified and as directed.

Form work to soffit of suspended slab such as roof slabs floor slab, laidings and similar work not exceeding 200mm thick , complete all as specified and as directed.

M&L for RCC type B-1, using 20mm graded crushed aggreage as in slab supported on walls, beams and columns in floors, roofs, lauding, ballonies and in shelves and the like, complete all as specified and as directed.

M&L TMT Steel bars 8 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Demolition of brick/stone built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, mass concrete etc complete all as specified and directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains including Demolition of un-reinforced cement concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks built in CM 1:4 straight or curved on plan exc 6m mean radius complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks built in CM 1:4 straight or curved on Plan exc 6m mean radius (but except bricks) complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. Complete all as specified and as directed.

M&L for Rendering 15mm thick plaster in CM 1:4 on any faces of brick or concrete surfaces including finished even and smooth with additional thickness is provided as floating/setting coat complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastred surfaces then applying two coats cement base paint on walls over a coat of white wash complete all as specified and directed.

M&L for PCC 1:2:4 type B-0(using 12.5 mm graded stone aggregate) as in channels /coping & benching of manhole, laid to shape and slope, surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed.

M&L for Cleaning of blockage of existing sewage system and plumbing system (Comprising of sewer line in CI, SGSW, PVC/UPVC or SG pipes), house connection from WC, bath, Kitchen etc including gully traps, floor/Nahani traps, CI Pipes and plumbing work etc of any description and in any position below or above ground level, located in different situations to remove the solid or liquid waste to make the entire system functional as directed by Engr-in-charge. Note :- (i) Contractor will deploy two SDA Mazdoor, daily to attend day to day complaint as mentioned above. SDA Mazdoor will report daily at AGE B/R Janglote Sub division at 0900 hrs and depart 1700 hrs after attending all complaints . In case of non attending complaints in same day, recovery @ Rs.250.00 per complaints will be recovered from contractor and in case of non deployment of SDA Mazdoor recovery @ Rs.400 per day per SDA Mazdoor shall be made from the contractor complete all as specified and as directed. (ii) The pament of minimum wages to workers, ESI, EPF etc shall be paid by contractor and produce all transation details of bank, EPf etc alongwith attendance register signed by all concern. The workes shall have at least two year experience for similar work and working in foul conditions, their Insurence shall be produce by contractor . Please note without submission of documents payment shall not be released.

M&L for Cleaning of blocked sewage drain pipe line of 100 mm dia and removing all sludges and foreign materials manually or mechanically in closed container as required etc., complete from the pipe line and making it serviceable free flow of sewage, complete all as specified and as directed.

M&L for Cleaning of blocked sewage drain pipe line of 150 mm dia and removing all sludges and foreign materials manually or mechanically in closed container as required etc., complete from the pipe line and making it serviceable free flow of sewage, complete all as specified and as directed.

M&L for Cleaning of blocked sewage drain pipe line exceeding 150 mm dia but not exceeding 250mm , removing all sludges and foreign materials manually or mechanically in closed container as required etc., complete from the pipe line and making it serviceable free flow of sewage, complete all as specified and as directed.

Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth and getting out, complete all as specified and as directed.

Removal of excavated (soil) to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm, complete all as specified and as directed.

M&L for concrete bed to drain pipes for 150mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2, complete all as specified and as directed.

M&L for Reinforced concrete pipes 150mm dia, class NP3 with one collar per length of pipe laid and jointed on concrete bed, complete including testing etc all . (concrete bed shall be measured and paid for separately).

M&L for concrete bed to drain pipes for 200mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and as directed.

M&L for Reinforced concrete pipes 200mm dia, class NP3 with one collar per length of pipe laid and jointed on concrete bed, complete including testing etc all . (concrete bed shall be measured and paid for separately), complete all as specified and as directed.

M&L for concrete bed to drain pipesfor 250mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2, complete all as specified and as directed.

M&L for Reinforced concrete pipes 250mm dia, class NP3 with one collar per length of pipe laid and jointed on concrete bed, complete including testing etc all . (concrete bed shall be measured and paid for separately), complete all as specified and as directed.

M&L for concrete bed to drain pipesfor 300mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2, complete all as specified and as directed.

M&L for Reinforced concrete pipes 300mm dia, class NP3 with one collar per length of pipe laid and jointed on concrete bed, complete including testing etc complete all as specified and as directed. (concrete bed shall be measured and paid for separately).

M&L for 450mm dia reinforced concrete pipes, class NP3 ,laid and jointed complete with collars, complete all as specified and as directed.

M&L for 600mm dia reinforced concrete pipes, class NP3 ,laid and jointed complete with collars, complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required, Internal dia of pipe 150mm, complete all as specified and as directed.

M&L for Cleaning of septic tank /soakage well of any depth & description including taking out all the stagnated sludge or any other material mixed with the sludge etc complete and disposal of all spoils / waste or any other materials out side the periphery of defence land at his own arrangements where sanitary hazards do not take place as per direction/instruction of civil authority and burried in excaveted pits and covering the same , including taking off and refixing covers after cleaning all as specified and directed. Note : Unit rate quoted by tenderer shall include taking out sludge (liquid/semi liquid/solid), excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc complete all as specified and as directed.

Surface dressing in any type of soil not exc 30 cm deep and averaging 15 cm deep in foul condition for removing heaps of wastes, cleaning of flora, fauma, follage and bushes around septic tanks, soakage well and man holes, removing debries/heaps of bushes etc from vicinity and depositing at a place where complete all as specified and as directed.

Removal of excess earth, waste materials etc. already dumped at site including necessary excavation to a distance exc 500 mtr and n exc. 1000 mtr wherever required along with sewage line and around soakage wells and septic tanks complete all as specified and directed. Note : Unit rate quoted by tenderer shall include taking out sludge (liquid/semi liquid/solid), excavtion of borrow pits for dumping sludge, removing including loading/unloading and transportation etc complete all as specified and as directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for all complete and as specified

M&L PCC 1:4:8 type D-2 75mm thick using (40mm graded crushed stone Agg) as in sub base finished even and smooth complete all as sfd and as directed by Engr in Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 Grade with grey cement and no pigment. complete all as specified and directed.

S& fix in repairs, for Vitreous china wash down water closet (Pedestal pattern) white with white seat cover with all fittings complete including connection to drain and to flushing pipe,anti syphonage pipe etc complete all as specified and as directed, complete all as specified and as directed.

S&Fix in repairs, Vitreous china wash down water closet' Orissa pattern white of size 580 mm x 440 mm with integral foot rest, CI 'P' or 'S' trap all fittings complete including connection to trap and to flushing pipe,anti syphonage pipe including making good to floor, cleaning surface etc complete all as specified and as directed. complete all as specified and as directed.

S&F in repairs One piece EWC S Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed. Make :- CERA/PARRYWARE/HINDWARE

S&F in repairs 15 mm, CP, bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed.

S&F in repairs 15mm bore CP jet spray for Pedestal pattern WC ,complete all as specified and as directed.

Dismantling floor hearth or wall tilling incl cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x600X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 , complete all as specified and as directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n . Exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade all complete and as specified including Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Fe410-W(Gde-E-250) complete all as specified and as directed.

M&L for painting to new steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic paint, complete all as specified and as directed.

Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe, complete all as specified and as directed.

Taking down of steel tubing and connections complete on walls floors etc for mm bore of pipe, complete all as specified and as directed.

S&F Galvanised iron medium graded tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia, complete all as specified and as directed.

S&F Galvanised iron medium graded tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia, complete all as specified and as directed.

S&F in repairs PVC grating 100mm dia and fixing with white cement, complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed, complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joints fixed complete to walls, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius in repair, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius in repair, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bend with access door in repair, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bend with access door in repair, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm, Complete all as specified and as directed.

S&F Solid PVC door frame of size 90mm x 55mm made out of 5mm PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly, PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC Mounlded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F Mild steel hinges medium weight cold rolled size 100mm, complete all as specified and as directed.

M&L for Precast Cover Slab, Gray Steel Fiber reinforced concrete 600x600mm Medium duty solid cover with frame all complete and as directed

M&L for Precast Cover Slab, Gray Steel Fiber reinforced concrete 750x750mm Medium duty solid cover with frame all complete and as directed

M&L for Precast Cover Slab, Gray Steel Fiber reinforced concrete 900x900mm Medium duty solid cover with frame complete all as specified and as directed.

M&L for preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint, complete all as specified and as directed.

Standard engineers

M/S SHRI RAM BUILDERS

KULBHUSHAN AGGARWAL