Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹68.9 LAccepted-Finance AT 75 JN ROAD HADDO PORT BLAIR SOUTH ANDAMAN PORT BLAIR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | 1 | Accepted-Finance L1 | |
| 2 | 2₹74.8 L+₹5.9 L (8.59%)Accepted-Finance | 2 | Accepted-Finance L2 | |
| 3 | 3₹78.9 L+₹10.0 L (14.5%)Accepted-Finance | 3 | Accepted-Finance L3 | |
| 4 | 4₹80.0 L+₹11.1 L (16.2%)Accepted-Finance | 4 | Accepted-Finance L4 | |
| 5 | 5₹85.0 L+₹16.2 L (23.5%)Accepted-Finance | 5 | Accepted-Finance L5 |
Tender Value
₹98.8 L
EMD Value
₹2.0 L
Closing Date
25 Oct 2023, 3:00 pmClosed
EE, PBND, APWD, Port Blair
EE, PBND, APWD, Port Blair
Providing Concertina coil fencing from Gate 1 to 4 at Haddo Port Complex in Port Blair under SD-IV, PBND, APWD, Port Blair
2023_APWD_11847_1
NIT No. 50/EE/PBND/2023-24
Open Tender
Civil Works - Others
Item Rate
180 days
Port Blair
Please refer tender documents
4 documents required · 4 mandatory
₹0
₹2.0 L
27 Oct 2023
6 Oct 2023
26 Oct 2023
6 Oct 2023
25 Oct 2023
9 Oct 2023
6 Oct 2023 - 23 Oct 2023
Amount
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
Beyond 30 cm girth upto and including 60 cm girth
Beyond 60 cm girth upto and including 120 cm girth
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form for
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and laying Autoclaved Aerated concrete blocks (AAC) masonry 150mm/230mm/300 mm thick AAC with Grade-1 blocks of density 551-650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
Supplying and fixing PVC coated mild steel angles flats etc. (PVC coated less than 0.70 thick) as in support as posts, struts in fencing including cutting tops to shapes as directed, drain holes notching for wire, flat iron fillets, (for securing wire mesh) including all necessary drilling, bolting and similar work confirming to Fe290 grade E-165 complete all as specified and directed.
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge.
Finishing walls with Acrylic Smooth exterior paint of required shade:
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Finishing walls with Acrylic Smooth exterior paint of required shade .
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Painting with aluminium paint of approved brand and manufacture to give an even shade:
One or more coats on old work
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and fixing punch type concertina coil of 600mm round type having 50 spirals per 6 metre length, core wire, high tensile steel wire SS with wire dia 2.50mm grade 316 weight per coil 8.5 kg per 6 mtr and blade profile 10 and 22 as specified in IS 4454 including necessary wire for fixing coil on security compound wall Y shape MS angle as specified and as per direction of Engineer-in-charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto of 5 kms for all lifts complete as per directions of Engineer-in-charge.
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
city construction company
KBR CONSTRUCTION
K P TRADING AND COMPANY PRIVATE LIMITED
AG Construction
Haneefa Constructions
ISLAND REALCON INDIA PRIVATE LIMITED
N V JOHN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .