GE/PNH-49/2025-26

Amount

B&R PORTION:- Taking down chowkhats or frames with shutters n exc 1.5 Sqm (without taking off shutters from frame). complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame), complete all as specified and directed.

Taking down shutter of any description area exc 1 sqm but not exc 2 sqm each, complete all as specified and directed.

S&F Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary cooler arrangement in window & guard bars all as per sample kept at GE Office and all as specified and directed by Engr-in-Charge.

S & F pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges 100mm long , 03 Nos each for double shutters, lock strike plate etc complete as specified and directed.

S & F pressed steel frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges 100mm long , 03 Nos each for double shutters, lock strike plate etc complete as specified and directed.

S & F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat, complete as specified and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats, complete as specified and directed.

M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality, complete all as spd & directed.

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M & L sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple all as specified and directed.

S&F Butt hinges 100 mm long, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified & directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified & directed.

S & F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified & directed.

S & F 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete, complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 mm x 350 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Note: Shade/Colour of tile shall be approved by the GE.

M&L machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and joined with grey cement slurry mixed with pigment to match the shade of the slab includiing rubbing, grinding, moulding and mirror polishing incl 20 mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface using WPC @ 3 % mised in cement mortar, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing even and smooth with out using extra cement complete all as specified and as directed.

M&L for applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over a coat of 1mm thick wall putty complete all as specified and directed.

Complete removal of existing treatment and applying two coats of oil emulsion distemper on walls complete all as specified and directed.

Complete removal of existing treatment and applying two coat of cement base paint on wall (any tint) on walls complete all as specified and directed.

Demolition of Concrete unreinforced of any description and in any position not otherwise specifically provided for and removing debris material from site to a distance not exc 50 m and deposited where directed, complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, etc. complete all as specified.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in cm 1:4 for laying floor finishes, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws , complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L for chequered cement concrete tiles 300x300x 25mm thick, set & jointed in neat cement slurry in floors and pointed with grey cement mixed with pigments, laid over and including 20mm thick screed bed in CM 1:6, incl dismantling of old tiles, complete all as specified and directed.

M&L for 50 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets, complete all as specified & directed.

S&F 4mm thick E-board (Classic) including fixing of frame work made of special section MS galvanised sheet with zink coating cellular intro painting and consisting of angle cleats of size 25mm wide 1.6mm thick with flag fixing to the ceiling with dash fastner 12.5mm x 40mm long or with 2mm dia GI wire or fixed with bolt in GI channel main 35x25x0.5mm thick and cross runner 25x25x0.5mm for fixing E-board of size 600x600x4mm thick including fixing of E-board with ceiling section and parimeter of channel 25x25x1mm thick,27mm high flange of 20mm to 30mm long extra, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete, all as specified and directed.

M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer, complete all as specified & directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on bricks surface, surface finished even & smooth without using extra cement complete all as specified and directed .

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in the frame complete all as per manufacturer's instructions.

Taking up or down 15mm bore steel tubing & connection including cleaning for or removal from site 15mm, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing & connection including cleaning for or removal from site 15mm, complete all as specified and directed.

S&F GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors, complete all as specified and directed.

S&F GI tubing medium grade 20mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors, complete all as specified and directed.

M&L for 20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed.

M&L for Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

S&F in repair 15mm bore dia bib taps, fancy type with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15 mm bore dia stop valve/angle cock with chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipes or for unions and fixed with butter fly handle, complete all as specified and directed.

M&L for hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

M&L for providing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh all as per specified design and pattern as directed , complete all as specified and directed by Engr in Charge Note: (Fillets, metal frame work and G.I. wire mesh are deemed to be included in the rates quoted by the contractor and rate also include cutting of ceiling for light points and provn of cobing and counter sunk)

M&L for preparation of newly POP surfaces and applying two coats of plastic emulsion paint over a coat of primer, complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any cement mortar, complete all as specified and directed. Note: Work will be in patches or in bulk

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & over and incl 10mm thick rendering in CM 1:3, complete all as specified & directed.

M&L for vitrified ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick screed bed in CM 1:6, complete all as specified and directed.

All s per srl item No. 59 Above but as in skirting/dado etc with and incl 10 mm thick backing coaat in CM 1:4, complete all as specified and directed.

Taking down exsting roof treatment of any description in any condition including removing of cement plaster of concrete of any description from the roof surfaces and removing all the debris to a distance n exc 100m and roughening surfaces by sweeping clean and washing down with water to remove dust etc and applying evenly cement slurry at the rate of 3 kg/sqm over cleaned surfaces and providing 10mm thick cement screed in CM 1:4, finished surface even and smooth, after that cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with one coat of industiral bituminous primer at the rate of 0.40ltr /sqm over the plastered surfaces of roof and applying a course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 1800c @ 1.2kg/sqm then applying APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less that 150 gms/sqm) laid with 75 mm side overlap and 150 mm overlap and 150 mm overlap primed surfaces by forced application as per manufactures instructions and including applying two coats of aluminium paint over APP membrane, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed.

M&L for 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

M&L 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal all as specified and directed.

S&F in repair PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl suitable for pipes complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layers (Cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd in SSR Pt-I, capacity of 1000 Ltrs including dismantling existing water tank and removing to store, complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in cm 1:4 for laying floor finishes, complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering of mortar 10 mm thick in cm 1:4 for laying floor finishes, complete all as specified and directed.

M & L for cement concrete 1:2:4, B1 using 20 mm stone agg as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, etc conforming to grade Fe-410W-(Gde E-250 Quality A), complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement using complete all as specified and directed .

M&L for Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and directed.

S&F in repair High or low level PVC valveless, syphonic action type, flushing cistern of capacity 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S&F in repair wash basin, vitreous China (flat back or angle back type) of size 580 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern),white (excluding fixing bolts, flushing cistern and flushing pipe) but incl plastic water closet seat cover, black, closed pattern with flt bottom with CP jet spray with aluminised hinging device, complete all as specified & directed.

S&F in repair vitreous china squatting pan (Orissa pattern) of size 580 x 440 mm, white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and anti syphonage pipe etc, complete all as specified and as directed.

S&F PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm diairon pipe, complete all as specified and directed.

S&F PVC connection 60 cm long fitted with PTMT nut and washer on both ends, fixed to 15mm diairon pipe, complete all as specified and directed.

S&F in repair 15mm dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair telephonic hand shower (Health faucet) (ABS Body) MS chromium plated suitable for long mm dia pipe with 1.25 mtr long flexible tube in chrome finish and ABS wall hook, complete all as specified and directed.

S&F in repair Brass CP Jet spray with holder complete assembly suitable for EWC pedestal pattern, complete all as specified and directed.

S&F in repair grating, PTMT 125 mm dia including jointing with solvent cement to waste pipe, complete all as specified and directed.

S&F in repair 20mm dia Gun-metal, globe gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layers (Cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd in SSR Pt-I, capacity of 500 Ltrs including dismantling existing water tank and removing to store, complete all as specified and directed.

S & F 100mm, butt hinges cast brass with mild steel hinge pin, bright polished, type B-11, complete all as specified & directed.

S & F 100mm long, brass barrel tower bolts with cast or sheet barrel,, complete all as specified & directed.

S & F 250 mm long, brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixed bolt with rolled or drawn brass bolts, complete all as specified & directed.

S & F in repair 15 mm bore wall mixer, 3 in 1 system with provision of both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand and overhead shower) with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe for brass ferrule, complete all as specified & directed.

S & F in repair, Wash basins, Vitreous China table top of size 530 mm x 420 mm x 140 mm, including cutting to marble/granite if required and CP coupling of suitable size alongwith waste pipe, complete all as specified and directed. Make: Jaquar cat part JDS-WHT-25907N or equivalent to ROCA/KOHLER

S&F in repairs 20 mm bore, Ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 99 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F switch socket combination 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F switch socket combination outlet 2 in 1, 6 pin, 6 & 16 Amps flush type universal, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

Supply and laying, jointing and testing, 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 10 Sqmm 2 core, laid in trenches/on floor/pole or under road/culvert incl taking out old unsv cable, complete all as specified and directed. Note: Excavation shall be measured and paid separately

Supply and laying, jointing and testing, 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16 Sqmm 2 core, laid in trenches/on floor/pole or under road/culvert incl taking out old unsv cable, complete all as specified and directed. Note: Excavation shall be measured and paid separately

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth in any type of soil for taking out or laying of pipe/cable etc complete all as specified and directed by Engineer-in-charge.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed. Note : Punned down thickness shall be measured

M&L for sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

S&F in repair tubes 40 mm, light grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed.

S&F Sub main wiring with single core cable 2x 4 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Three wire of 4 sqmm and one run of PVC conduit/casing caping shall be measured as one unit.

Supply and fixing, connecting and commissioning in repair LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver fixed to wall/ pole complete with IP 65/66 protection, incl three core PVC insulated, sheathed 1.5 sqmm multistranded aluminium conductor with 2 core, 1.5 sqmm PVC insulated cable from junction box to light fitting, complete all as specified and directed.

Supply and fixing, connecting and commissioning in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver fixed to wall/ pole complete with IP 65/66 protection, incl three core PVC insulated, sheathed 1.5 sqmm multistranded aluminium conductor with 2 core, 1.5 sqmm PVC insulated cable from junction box to light fitting, complete all as specified and directed.

S&F in repair GI bracket made of 40 mm bore light grade pipe made to shape of length 1.5 mtr fixed with two set MS clamp 50 X 6 mm nut bolt & washer fixing to steel tubular pole/PCC pole duly painted with two coats of aluminium paint, complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

Supply and fixing LED light fitting 1 x 20 W, 220V, AC decorative box type with driver, holder incl LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair LED inverter lamp, CDL, 9/10 watt, B22 base, complete all as specified and directed.

S&F in repair tubes 20 mm dia, light grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed.

M&L for Cutting and screwing of existing steel tubing for alterations or additions (Each cut measured) incl all necessary items for making connection, complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 4 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S & F in repair Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground level, complete all as specified and directed.

S & F air termination, single pointed aluminium rod 12mm dia and 300mm long fixed on the roof incl all fittings, fixtures and PCC 1:2:4 type B-1 blocks 100 mm x 100 mm x 100 mm, complete all as specified and directed.

S & F Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 nos., 8mm dia 25mm long hexagonal head brass screws incl box of size 90 x 90 x 90 mm made up of 1.6 mm plain sheet and screwed to GI pipe/wall for protection of test point, complete all as specified and directed.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 32 x 6 mm galvanised MS strip by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

S&F in repair tubes 40 mm, medium grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed.

S&F in repair tubes 20 mm, medium grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed.

Taking out old unsv exhaust fan from site and replacement of exhaust fan, made up of sturdy engineering plastic body complete with louvers shutter, AC single Phase, 230V, RPM 1200, copper winding of sweep 300 mm complete incl all connecting accessories complete all as specified and directed by Engineer-in-charge.

narayan construction (BID ID -3374869)

M/S KHAN ENTERPRISES (BID ID -3374144)

JAMWAL CONSTRUCTION CO (BID ID -3374767)

M/S KABIR CHOUDHARY (BID ID -3366717)