Repair to wall, joinery, sanitary fittings, roof sheeting and other misc work for OTM at New Mil Stn Kapurthala under GE Kapurthala

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x 7mm/450 x350 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4) complete all as specified and directed by Engr-in-Charge.

M&L Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 15mm thick screed bed/bedding layers in cm 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for granite for cooking platform 20mm thick machine cut, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 16-20mm thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing incl 20mm thick screed bed cm 1:4 complete all as specified and directed by Engr-in-Charge.

Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed by Engr-in-Charge.

M&L for digging out average 10mm thcik on distubed chajja beam, slab portion, parapet and applying chicken wire mesh over disturbed portion fixed with drilling, bolting etc after anti corrosion treatement of steel bar and finally finished with 10mm thick (1:3) cement plaster mixed with WPC @3% by the weight of cement all as specified and directed by Eng-in-Charge. Note:- (i) The bars which are corroded badly need to be strengthen by placing new bars by means of welding with proper splice length and will be measured and paid seprately under appropriate item. (ii) The rate of item includes necessary shuttering, scaffholding, staging etc all as specified and directed by Eng-in-Charge.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc, complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished fair and smooth complete all as specified and directed by Engr-in-Charge. Note:- water proofing compound shall be measured seprately.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats white wash on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame with PCC (1:3:6) using 20mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling with PCC 1:3:6 type C2 using 20mm graded stone aggregate hollow frame complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but divided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters complete all as specified and directed by Engr-in-Charge.

S&F of Factory made PVC panel door shutter 28 to 30 mm thick (style) consisting of PVC sheet panel inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drawing in SSR Part II complete all as specified and directed by Engr-in-Charge.

S&F framed work Fe 410-W(Gde-E-250)Quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering.Doors etc. to be prepared for hanging or sliding with and incl hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

S&F 25mm flush shutters in cupboards, solid core construction, with block board core and plywood face panels, commercial type both sides complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium alloy, anodised,sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F 150 mm Hasp and staple, aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar paid seprately under appropriate item complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium windows and ventilators powder coated with frames & shutters with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Powder coated Anodised aluminium door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick plain acrylic glass sheet glass in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F 6.30mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality ordescription ) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-Charge

S&F Aluminium (die cast body) Door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed by Engr-in-Charge.

S&F glavanised MS wire cloth, 0.56mm nominal dia of wore and average with of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples, complete all as specified and directed by Engr-in-Charge.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of lath is 1.25mm but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-Charge.

S&F for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed by Engr-in-Charge.

S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness complete all as specified and directed by Engr-in-Charge.

M&L for 12mm perforated particle board 600 x 600 x 12mm for ceiling on aluminium snap grid frame work of 605 x 605 mm and hangers 6mm dia GI upto (1200mm length) adjusting level fixed to roof slab by means of celing cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastner 12.5mm dia 40mm long complete all as specified and directed by Engr-in-Charge.

S&F PVC hollow wall & roof (as in false ceiling) panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm C/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm C/C vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia stop valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms)

S&F in repairs 15mm dia Pillar taps fancy type long neck of cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed or iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs15mm Angle stop valve fancy type of cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge.

S&F in repair Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs of vitreous china bowl urinals flat back, half stall complete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, jointing around urinal back in cement paste including flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs PTMT greating round 140mm size (minium weight 50 gms) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 32 mm bore PVC waste cupling with PVC waste pipe for WHB complete all as specified and directed by Engr-in-Charge.

S&F in repairs 40 mm bore PVC waste cupling with PVC waste pipe for Sink complete all as specified and directed by Engr-in-Charge.

S&F acrylic toilet cabinet with shelves 425mmx350mm 100 mm size , with shutter complete all as specified and directed by Engr-in-Charge.

S&F PVC flushing cistern low level of capacity of 10 ltr, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm complete all as specified and directed by Engr-in-Charge.

S&F for vitreous china ware wash basin white, flat back size 550 X 400mm with pedestal including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs shower rose of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed by Engr-in-Charge.

S&F in repair kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats(min. weight 300gm) complete all as specified and directed by Engr-in-Charge.

S&F in repair anodised aluminium alloy curtain rail chromium plated with fixing brackets, stops, roller etc as specified and directed. complete all as specified and directed by Engr-in-Charge

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings as specified and directed complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 500 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 1000 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 2000 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks three layered cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity incl fittings complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks three layered cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks three layered cylindircal water tank for hoisted and fixed in postion of 2000 ltrs capcity incl fittings complete all as specified and directed by Engr-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and directed by Engr-in-Charge.

Cutting grooves in brick wall, 75mm wide and 65mm deep inlcuding for inserting TMT bar as required length and shaping horizontal/ vertical face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

M&L cement concrete 75mm type B-1, 1:2:4 (20mm graded aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

PCC (1:5:10) type E2 using 40mm graded aggregate as in filling of sunken portion complete all as specified and directed by Engr-in-Charge.

M&L 25 mm thick Cement concrete type B1, 1:2:4 (using 12.50 mm graded stone aggregate) as sub base for receiving tile complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engr-in-Charge.

Demolation of mud in roof any thickness incl plastering & leeping removed complete all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed by Engr-in-Charge.

M&L 50 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab with using waterproofing liquid compound as per manufacturing instruction complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick Brick tiles including & laid over 15 mm thick screed bed in cement mortar 1:6 with Jointing & Pointing in cement mortar (1:3) mixed with 5% of crude oil by wt of cement complete all as specified and directed by Engr-in-Charge.

M&L cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engr-in-Charge.

Motorway Constructions

Gurjit const co

Bidder Name

JOGRAJ CONSTRUCTION COMPANY