CONSTRUCTION OF LAWYER'S HALL IN CAMPUS OF CIVIL COURT ,KHAGARIA

CONSTRUCTION OF LAWYER'S HALL IN CAMPUS OF CIVIL COURT ,KHAGARIA

Sl. SOR CODE Item of Works Main Building PHE Septic tank Boring Road RWH Furniture Fire fighting Quantity Unit Rate Amount

1 2.6.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 237.908 22.806 260.71 Cum 314.90 82,099.00

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 8.920 8.92 Cum 360.70 3,217.00

3 2.27 Extra for every additional lift of 1.5 m or part thereof in :

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 53.879 1.370 22.650 0.830 78.73 Cum 287.30 22,619.00

5 Derived Providing class designation FLYASH brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 238.628 8.000 8.750 255.38 Sqm 290.04 74,070.00

6 Derived Providingclass designation FLYASH Brick Edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/. 148.700 148.70 Sqm 450.21 66,946.00

7 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 10.471 1.370 11.84 Cum 3998.10 47,343.00

8 4.1.2 Providing and laying in position cement concrete of specified grade exlusive the cost of centering and shuttering all work upto plinth work. 1:1.5:3(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 26.28 26.28 Cum 4420.8 116,179.00

9 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.930 0.93 Cum 3434 3,194.00

10 4.1.8 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) 5.770 5.77 Cum 2975.20 17,167.00

11 5.33a Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete

A 5.33A.1 All work upto plinth level 59.315 59.31 Cum 4756.90 282,153.00

5.33A.2 All works above plinth level upto floor V level

B 5.33A.2.1 Walls columns, pillars, posts cind struts 13.640 13.64 Cum 5293.50 72,203.00

C 5.33A.2.1 Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. 36.995 36.99 Cum 5677.20 210,025.00

12 5.33B.1 Add or deduct for providing richer or leaner mixes respectively at all floorlevels.Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 109.949 109.95 Cum 164.50 18,087.00

13 5.1.2 Providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centring, shuttering,finishing andreinforcement-All work puto plinth level1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate20 mm nominal size) 2.205 0.370 2.57 Cum 4688.30 12,072.00

14 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

A 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 1979.084 33.300 2012.38 Kg 94.50 190,170.00

B 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 2638.778 154.030 2792.81 Kg 92.60 258,614.00

C 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 1319.389 1319.39 Kg 90.80 119,801.00

D 5.22.7D Thermo-Mechanically Treated bars TMTC-500-16 to 25mm dia. 7256.641 7256.64 Kg 91.70 665,434.00

15 5.90 Centring and shuttering including strutting, propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete.

A 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 99.040 1.520 100.56 Sqm 211.60 21,278.00

B 5.9.6 Columns,Pillars, Piers, butmentsPosts and Struts 122.760 122.76 Sqm 494.40 60,693.00

C 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 224.423 224.42 Sqm 404.70 90,824.00

D 5.9.3 Centring and shuttering including strutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 143.480 143.48 Sqm 437.50 62,773.00

E 5.9.7 Stairs,(excluding landings 7.380 7.38 Sqm 439.90 3,246.00

G 5.9.19 Weather shade,Chajjas, corbels etc. including edges 19.740 19.74 Sqm 550.90 10,875.00

16 6.1.14C Brick work with bricks of class designation FLYASH in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ). 0.787 3.415 9.400 2.810 16.41 Cum 4923.00 80,795.00

17 6.1.12C Brick work with bricks of class designation FLYASH in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse sand ). 5.456 5.46 Cum 5116.30 27,916.00

18 6.1.14C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 45.959 45.96 Cum 5765.20 264,963.00

19 6.1.12C+ 6.3C Half brick masonry with bricks of class designation100A in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse send) Extra for half Brick masonry in superstructure above pinth level upto floor V level. 4.375 4.37 Cum 5958.50 26,066.00

20 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. 7.000 7.00 Each 165.40 1,158.00

21 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm profile C 21.150 21.15 Meter 432.60 9,149.00

22 9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 6.930 6.93 Sqm 2293.40 15,893.00

23 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws. 8.139 8.14 Sqm 2845.60 23,159.00

24 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc 355.860 355.86 Kg 144.50 51,422.00

25 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 115.500 115.50 Kg 546.80 63,155.00

26 10.30 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 7.829 7.83 Sqm 6303.40 49,346.00

27 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent ordyed to required colour or shade, with nuts and screws etc. complete:

28 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:

29 9.10 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

30 9.10 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper 4.000 4.00 Each 60.80 243.00

31 21.10 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

A 21.1.1.2 For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 80.291 80.29 Kg 418.40 33,594.00

B 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 199.836 199.84 Kg 480.20 95,961.00

32 21.30 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.1 With float glass panes of 4.0 mm thickness(weight not less than 10kg/sqm) 32.117 32.12 Sqm 809.30 25,992.00

33 10.40 Providing and fixing 1 mm thick M.S.sheet sliding - shutters with frame and diagonal braces of 40x40x6 mm angle iron,3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top bottem respectively including applying a priming coat of approved steel primer. 2.205 2.21 Sqm 4279.90 9,437.00

34 21.4.1 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness 2.000 2.00 Each 2283.80 4,568.00

35 13.11.4 12 mmCement plaster in course sand 1:6(1 cement: 6 coarse sand) 282.530 282.53 Sqm 141.50 39,978.00

36 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 182.600 182.60 Sqm 125.60 22,935.00

37 13.12 15 mm cement plaster on rough side of single or half brick wall of mix.

37 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 27.650 5.150 32.80 Sqm 203.60 6,678.00

38 13.26 Neat cement punning 23.648 23.65 Sqm 40.50 958.00

39 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 56.259 56.26 Sqm 795.00 44,726.00

40 11.39 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1 st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 16.508 16.51 Sqm 686.80 11,337.00

41 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 95.122 95.12 Sqm 1638.80 155,886.00

42 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 6.441 6.44 Sqm 1191.80 7,677.00

43 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand

44 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 12.239 12.24 Sqm 1334.90 16,338.00

45 13.46.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats) 375.870 375.87 Sqm 137.00 51,494.00

46 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 465.130 465.13 Sqm 105.40 49,025.00

47 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 465.130 465.13 Sqm 102.30 47,583.00

48 13.82.1/13.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) With ready mixed zinc chromate yellow primer of approvedbrand and manufacture on steel alvanized iron/steelworks 77.580 77.58 Sqm 83.50 6,478.00

49 12.39 Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 over P.V.C sheet. 8.000 8.00 Nos 189.40 1,515.00

50 22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.

22.18.1 2 mm (for corrugated roof sheets). 150.660 150.66 Sqm 354.80 53,454.00

51 23.2 + 23.8 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment). Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately). 177.271 177.27 Sqm 173.60 30,774.00

52 Derived Providing 250mm wide brick drain in cement mortar (1:6) with av.150mm. Clear depth and 250mm apron including cost of E/W.involved with 75mm cement concrete (1:4:8) over one brick designation flyash flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 30.000 30.00 Meter 1097.49 32,925.00

53 Carriage of Material-

54 Extra Cost of Material

55 18.70 Providing and fixing Chlorinated Polyvinyl Chloride(CPVC pipes,having thermal stability for hot & cold water supply,

A 18.7.3 25mm nominal outer dia pipe 40 40.00 Meter 317.3 12,692.00

B 18.7.4 32mm nominal outer dia pipe 30 30.00 Meter 395.2 11,856.00

56 18.80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing.

Concealed work, including cutting chases and making good the walls etc.

18.8.2 20mm nominal outer dia Pipes 50 50.00 Meter 350.8 17,540.00

57 18.16 Providing and fixing brass stop cock of approved quality (screwed end).

A 18.16.1 15mm nominal bore 2 2.00 Each 303.8 608.00

B 18.16.2 20mm nominal bore 2 2.00 Each 328 656.00

58 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end).

A 18.17.1 25mm nominal bore 2 2.00 Each 532.3 1,065.00

B 18.17.2 32mm nominal bore 2 2.00 Each 589.9 1,180.00

59 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end)

25mm nominal bore

60 18.21 Providing and fixing uplasticised PVC connectionpipe with brass ions

18.21.2.1 15 mm nominal bore 4 4.00 Each 85.2 341.00

61 18.49.1 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 5 5.00 Each 434.2 2,171.00

62 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS stamdards and weighing notless than 810 gms.

18.50.1 15 mm nominal bore 4 4.00 Each 715.1 2,860.00

63 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS stamdards and weighing notless than 690 gms.

18.51.1 15 mm nominal bore 4 4.00 Each 708.4 2,834.00

64 18.52 Providing and fixing C.P brass stop cock (concealed) of standard design and of approved mark conforming to IS:8931

18.52.1 15mm nominal bore 1 1.00 Each 594.8 595.00

65 18.53 Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved quality conforming to IS: 8931

18.53.1 15mm nominal bore 10 10.00 Each 500.4 5,004.00

66 18.76 Cutting holes up to 30 x 30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks 5 5.00 Each 198.5 993.00

67 18.77 Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) including finishing complete so as to make it leak proof. 7 7.00 Each 217.1 1,520.00

68 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 1000.00 Litre 9.7 9,700.00

69 18.79 Making holes up to 20 x 20 cm and embedding pipes upto 150 mm in diametre in masonary and filling with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) including dispopsal of malba. 7 7.00 Each 115.7 810.00

70 17.70 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 3 3.00 Each 2369.9 7,110.00

71 17.80 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 1 1.00 Each 1500 1,500.00

72 17.28 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

73 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 3 3.00 Each 1068.5 3,206.00

74 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete 1 1.00 Each 713.3 713.00

75 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms 1 1.00 Each 424 424.00

76 12.78 Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

77 12.79 Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Single pushfit Coupler:

Single tee with door

Single tee without door

78 12.80 Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

79 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. 4 4.00 Each 47.9 192.00

80 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.1.1 White Vitreous china Orissa Pattern W.C pan of size 580x440mm with integral type foot rests. 2 2.00 Each 4470.9 8,942.00

81 17.2 Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.2.1 W.C pan with ISI marked white solid plastic seat and lid. 1 1.00 Each 4230 4,230.00

82 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105gms. 3 3.00 Each 146.3 439.00

83 17.5. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe,spreaders with unionsand clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I.trap with outlet grating and other couplings in C.P. brass, includingpainting of fittings and cutting and making good the walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 2 2.00 Each 6469 12,938.00

84 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distances of 37mm fromwall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 90 gms. 3 3.00 Each 204.7 614.00

85 19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

86 19.20 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes inlcuding bed concrete as per standard design.

19.2.2 150mm diameter S.W. pipe 15 15.00 Meter 494.4 7,416.00

87 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

19.4.3.1 180x150 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2 2.00 Each 1994.1 3,988.00

88 19.30.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3 coarse sand), finishedsmooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design

89 19.30.1.0 Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 3 4 7.00 Each 4266.8 29,868.00

90 24.1.1.1 Boring/drilling bore well of required dia for casing/strainer pipe by suitable method 300mm dia etc all complete job as per building specification & direction of E/I. 90.00 15 105.00 Meter 486.80 51,114.00

91 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe by suitable method 300mm dia etc all complete job as per building specification & direction of E/I. 11.00 11.00 Meter 567.90 6,247.00

92 24.3.2 Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required 150mm dia etc all complete job as per building specification & direction of E/I. 11.00 11.00 Meter 660.10 7,261.00

93 24.4.1 Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipe of required 100mm dia etc all complete job as per building specification & direction of E/I.100mm nominal size dia 90.00 90.00 Meter 573.10 51,579.00

94 24.4.2 Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipe of required 100mm dia etc all complete job as per building specification & direction of E/I.150mm nominal size dia 15 15.00 Meter 673.50 10,103.00

95 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 0.6 0.60 Meter 1188.90 713.00

96 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 0.6 0.60 Meter 1195.60 717.00

97 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- Charge. 0.6 0.60 Meter 1195.60 717.00

98 24.8 Gravel packing in tubewell construction in accordance with IS:4097 including providing gravel line/medium/coarse in required grading and sizes etc all complete job as per building specification & direction of E/I. 3.00 3.00 Cum 1343.20 4,030.00

99 24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe 100mm dia etc all complete job as per building specification & direction of E/I. 1.00 1.00 Nos 189.70 190.00

100 24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell 100mm dia etc all complete job as per building specification & direction of E/I.100mm 1.00 1.00 Nos 1448.40 1,448.00

101 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell 100mm dia etc all complete job as per building specification & direction of E/I.150mm 1 1.00 Nos 1531.40 1,531.00

102 24.15.1 Providing and fixing bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (Part_1) 100mm dia etc all complete job as per building specification & direction of E/I.100mm 1.00 1.00 Nos 228.30 228.00

103 24.15.2 Providing and fixing bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (Part_1) 100mm dia etc all complete job as per building specification & direction of E/I.150mm 1 1.00 Nos 281.80 282.00

104 18.9.4 Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes havaing thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings this inludes jointing of pipe & fitting etc all complete job as per building specification & direction of E/I. 15.00 15.00 Meter 359.10 5,387.00

105 24.12 Development of tubewell in accordance with IS:2800 (Part_1) and IS:1189 to establism maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor running the compressor for required time etc all complete job as per building specification & direction of E/I. 8.00 8.00 hours 916.80 7,334.00

106 18.45 Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. 1.00 1.00 Nos 1084.60 1,085.00

107 NS1 Supplying 1 H.P. Cromoton gravel submersible pump strainer with all accossories for running condition etc all complete job as per building specification & direction of E/I. 1.00 1.00 Nos 15650.00 15,650.00

108 NS2 Supplying, fitting and fixing Rectangular size of Standard size of Sal wood Dinning Table with Glass top , of Approved brand and Manufacture etc. all complete Jobs. 22 22.00 Each 10800.00 237,600.00

109 NS3 Supplying, fitting and fixing Chair for dinning hall of Approved brand and Manufacture etc. all complete Jobs. 66 66.00 Each 4500.00 297,000.00

110 NS4 Providing and fixing Carbon-di-oxide fire entinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 Capacity 4.5 kg ISI Marked. 3.00 3.00 Each 6310.00 18,930.00

111 NS5 Supplying, fitting and fixing Chair for dinning hall of Approved brand and Manufacture etc. all complete Jobs. 3.00 3.00 Each 5089.00 15,267.00

SOR+DSR+NS=(A) ₹ 5,725,440.00

NON SCHEDULE =(B) ₹ 584,447.00

CORRECTION FACTOR 0.982(OF C)=(D) ₹ 5,048,455.00

5.36%ADDITIONAL GST(OF D)=(E) ₹ 270,597.00

ELECTRIC 909,260.00

BILL OF QUANTITY

Name of work :- Estimate for Provision of E.W & E.I in Proposed Construction of Lawyer's Hall in Sub-Divisional Court at Gogri, Distt. Khagaria.

Sl. No. Code Particular Qty. Rate Unit Amount

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Batten Holder Point 16

Down Light Point 8

Tube Light Point 10

Ceiling Fan Point 10

suspended light point 14

Exhaust Fan Point 4

2 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 135 309.00 Meter 41,715.00

3 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 13 414.00 Each 5,382.00

4 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 9 531.00 Each 4,779.00

5 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 5 683.00 Each 3,415.00

6 1.7 Wiring for circuit/submain wiring along with earth wire with the following size of FRLS PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (for Circuit) 200 201.00 Meter 40,200.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 225 246.00 Meter 55,350.00

1.7.3 2 X 4 sq mm + 1 X 4 sq mm (for AC) 75 309.00 Meter 23,175.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 20 660.00 Meter 13,200.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 55 925.00 Meter 50,875.00

7 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 3 4,184.00 Each 12,552.00

8 2.12 Supptying and fixing following rating, 24Al4L5 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

2.12.1 6/32 amps, single pole 36 237.00 Each 8,532.00

9 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as reqd.

10 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

11 2.7 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

12 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 12 1,809.00 Sq.ft. 21,708.00

13 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required 1 6,536.00 Each 6,536.00

14 1826.00 Copper strip/tape of different size 6 871.00 kg 5,226.00

15 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

16 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

17 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.1.2 Above 35 sq. mm and upto 95 sq. mm 105 326.00 Meter 34,230.00

18 1.33 Supplying and fixing 2 pin, 6 amps ceiling rose on the existing junction box / wooden block including connection etc as required. 24 64.00 Each 1,536.00

19 1.34 Supplying and fixing batten/angle holder including connection etc as required. 16 80.00 Each 1,280.00

20 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp 16 250.00 Each 4,000.00

21 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 10 521.00 Each 5,210.00

22 5.2 Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 4 492.00 Each 1,968.00

23 5.6 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

24 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

25 5.15 Supplying and fixing following types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

26 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 5 1,038.00 Each 5,190.00

27 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 10 358.00 Each 3,580.00

28 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 10 2,482.00 Each 24,820.00

29 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

30 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 13,721.00 SET 27,442.00

31 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40 144.00 Meter 5,760.00

32 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

33 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required

1.15.1 1x1.5 sq.mm (for inverter) 128 38.00 p.mtr 4,864.00

34 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4 416.00 Each 1,664.00

35 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 4 81.00 Each 324.00

36 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 107 102.00 Each 10,914.00

37 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 35 145.00 Each 5,075.00

38 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 10 102.00 Each 1,020.00

39 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 6,323.00 SET 12,646.00

40 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 10 1,064.00 Each 10,640.00

41 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. 40 37.00 Meter 1,480.00

42 NS SITC 2 MP IR Bullet Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ONVIF (PROFILE S), Support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Analytics – Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus) 2 5,250.00 Each 10,500.00

43 NS SITC 2 MP IR Indoor Dome Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF Support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Analytics – Line crossing detection, Intrusion detection, Motion detection, Video tampering, UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus) 2 5,150.00 Each 10,300.00

44 NS SITC of 43 Inches Commercial Display (Approved Makes: LG / Samsung / Panasonic) / Equipment 1 36,500.00 Each 36,500.00

45 NS SITC of 4TB Surveillance Hard Disk 1 11,500.00 Each 11,500.00

46 NS Supply, Installation, Testing and Commissioning of CAT 6 UTP cable 23 AWG solid copper conductor for Connectivity of Hub room to End Point. 150 52.00 Meter 7,800.00

Total Rs. 918,352.60

Total Amount Rs. 918,352.60

Electrical Executive Engineer

J.E.E A.E.E Estimating officer Electric Building Division, Bhagalpur

EBS/BCD/KGG. EBSD/BCD/KGG. EBD/BCD/BGP Building Construction Department.