PROVN OF WORK SERVICES FOR COVERING OF QTY-04 NOS OPEN PENS INTO SOFT PENS AND ASSOCIATED WORK AT AF STN LEH

Amount

Excavation in over areas not exceeding 1.5m in depth and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engineer-in-Charge

Removing excavated material (rocks) a distance exceeding 250 metre but n.exc 500 metre and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Supply and fix, rolled mild steel (structural steel) in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. FE-410-W, Gde E-250, complete all as specified and directed.

Supply and fixing, plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and directed.

Supply and fixing, Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 22.5cm and not exceeding 30cm complete all as specified and directed.

Material and labour, two coat of synthetic enamel paint on newly surface over one coat of Red oxide, zinc chrome surface of any description over 10 cm in width or girth, not otherwise described complete all as specified and directed..

Supply and fixing, pre-painted galvalume aluminium zinc coating mild steel corrugated sheets 0.50mm thick, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fixing, pre-painted galvalume aluminium zinc coating mild steel plain sheets 0.50mm thick, having tensile strength of 550 Mpa as in ridge of roof, fixed with self tapping screws, complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting, with power road roller 8 to 12 tonne capacity , complete all as specified and directed.

Material and labour, hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material and labour, 150mm thick Dry lean concrete (DLC) cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of floor, complete all as specified and directed.

Material and labour for cement concret 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in hard-standing/mass concrete thickness of concrete 200 mm.complete all as specified and directed.

Material and labour for Forming contraction (Dummy) joints 65 mm deep X10 mm wide primed & filled with sealing compound grade "A"complete all as specified and directed.

Material and labour, for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ , thickness of slab 200mm complete all as specified and directed.

Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 10mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Material and labour for reinforced cement concrete M-30 (design Mix) using 20mm graded crushed stone aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns, complete etc all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete etc all as specified and directed.

G and G Infratech Private Limited (BID ID -3069021)

bamral builder (BID ID -3068640)