GE(S) BTD 56 OF 2019-20 REPAIR TO SUNKEN FLOOR LEAKAGE SEEPAGE OF TOILET KITCHEN JOINERY PLASTERING PATH FLOORING PLUMBING WORK AND OTHER CONNECTED WORK IN BASANT BAGH AREA UNDER AGE BR II OF GE (S) BATHINDA MIL STN

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all complete all as specified & directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications complete all as specified & directed.

S & F 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings all as specified & directed.

S&F 100 mm long extruded aluminium alloy butt hinges fixed to PVC door with screws complete all as specified & directed.

S&F in repair 100 mm long extruded aluminium alloy butt hinges fixed to PVC door with screws complete all as specified & directed.

S&F aluminium anodiesed barrel tower bolt of extruded section size 150 mm, complete all as specified & directed..

S&F aluminium handles cast type anodized size 150 mm long, complete all as specified & directed.

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site, complete all as specified & directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) and removal from site, complete all as specified & directed.

S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified & directed.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified & directed.

S&F for pressed steel frames of size 75 X 60 mm for Cubboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified & directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) for filling in pressed steel frames, bed block of hold fast etc complete all as specified and as directed.

S&F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I).

S&F 18/19 mm thick medium density flat pressed three layer particle board exterior grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shutters complete all as specified & directed.

S&F 100 mm long aluminium anodised hasp and staple safety type including bolts to hinge plate and fixed with screw complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified & directed.

S & F in repair galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified & directed.

S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate complete all as specified & directed.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

Supply only 100 mm size Butt hinges, ISI market medium weilght, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm size mild steel pressed handles, oval type ISI marked stove enamelled black complete all as specified and as directed.

Preparation of new wood surfaces and applying two coats of sythetic enamel paint over a coat of pink primer, complete all as specified & directed.

S & F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting, complete all as specified & directed.

All as per Item No 25 here-in-before but without glazing bars.

All as per item No 25 here-in-before put windows or ventilators fixed type with glazing bars complete.

S & F window guard bars and similar works with ends of bars welded or riveted confirming to Fe.290. Gde-E-165 complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (for steel surfaces) over a coat of red oxide, complete all as specified & directed.

M &L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames, complete all as specified & directed.

All as per item No 30 but pin head type, figured glass.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and supply and fixing 3 mm thick ordinary sheet glass with oil putty in square nexc 0.5 sqm in each pane, complete all as specified & directed.

All as per item No 32 but pin head type, figured glass

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified & directed.

S & F in repair PVC low level cistern of 10 litre capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified & directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed. (Note : Pillar tap shall be measured as supply only under respective item).

S&F in repair pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified & directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified & directed.

S & F in repair 15 mm bore brass stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified & directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified & directed.

S & F in repairs 15 mm dia bore brass stop valves cast copper alloy (concealed type) complete all as specified and as directed.

S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified & directed.

S&F stainless steel sink with drainage board made of stainless steel of 1mm thick kitchen sink of size 915 x 460mm bowl size of 410 x 330 x 160mm with coupling ,waste pipe and bracket complete all as specified & directed.

S&F in repair 15 mm dia bore brass bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F CP grating of best quality of size 125mm complete all as specified & directed.

M&L for 25mm dia fancy type PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirements including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. (Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account).

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick, complete all as specified & directed.

S&F framed brackets of angles, cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each brackets confirming to Fe - 290, Gde - E - 165 as door frame, sink, hand wash basin and cooler stand etc complete all as specified & directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc, complete all as specified & directed.

M&L for 25mm thick PCC 1:2:4 type B-O (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified & directed.

M & L for cleaning of old Roof wall/ concrete surfaces & applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm complete all as specified and directed.

M&L for 20 mm thick plaster to roof, floor or in vertical surfces in CM (1:4) (using coarse sand), finish even and smooth without using extra cement, complete all as specified & directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. complete all as specified & directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors set and jointed over & including cement screed bed 15mm in CM 1:4 and pointed in white or coloured cement to match complete all as specified & directed.

M&L for non skid ceremic coloured tiles 7-8 mm thick(Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified & directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement plaster in CM (1:4) complete all as specified & directed.

M&L for marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15 mm thick screed bed on CM 1:6 complete all as specified & directed.

Roundening to the edge of stone slabs on edge such as cooking plateform etc complete all as specified & directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified & directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified & directed.

S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints & fixing to walls with clamps, complete all as specified & directed.

S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints fixing to walls with clamps, complete all as specified & directed.

S&F in repair 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified & directed.

S&F 100 bore, CI heel rest bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified & directed.

S&F in repair 75mm bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified & directed.

M&L in repair for 100mm dia of CI floor trap with grating incluing jointing to waste pipe encased with cement concrete 1:2:4 type B1 complete all as specified & directed.

M&L in repair for 75mm dia of CI floor trap with grating incluing jointing to waste pipe encased with cement concrete 1:2:4 type B1 complete all as specified & directed.

M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complete all as specified & directed.

M&L for 100 mm dia Cast Iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified & directed.

M&L for 75 mm dia Cast Iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified & directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads, shoes, bends, swan necks etc including removal from site all as specified & directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint (6 Kg/Sq cm.) fixed to walls with and including MS clamps complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius fixed to PVC pipes all as specified & directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal from site, complete all as specified & directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal from site, complete all as specified & directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified & directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified & directed.

Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls, ceiling, floors etc all as specified & directed.

All as per serial item 81 here in before but 20 mm bore

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, steps, bed blocks etc complete all as specified & directed.

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed (reinforcement cut as required to facilitate demolition)

M&L for R.C.C type B1 1:2:4 (using 20mm graded aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified & directed.

S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified & directed.

S&F mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified & directed.

Use & waste of formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tanks and removing to store 500 ltr. Capacity, complete all as specified & directed.

Supply and fixing three layers 500 liter HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling of bricks laid dry in floor (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified & directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified & directed.

M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified & directed.

M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska but except tile, complete all as specified & directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded agg) as in plinth protection, complete all as specified & directed.

M&L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) as in mass conc, sub base etc complete all as specifed and directed.

M&L for sand filling under interlocking tiles 25mm thick including watering and consolidating complete all as spefcified complete all as specified & directed.

S&F 60mm thick interlocking paver block any shape & size with Grey Cement and no pigment complete all as specified & directed.

M&L for PCC 1:2:4 type B-1(using 20 mm graded aggregate) as in kerb stone complete all as specified & directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified & directed.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified & directed.

M&L for brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc, complete all as specified & directed.

Rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc finished even and smooth without using extra cement complete all as specified & directed.

Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment on wall and ceiling (any number of layears) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces with wall putty and remov vegetable/plants roots from walls/Chajjas and preparation of surfaces for further treatment etc complete all as specified and directed.

M&L for one coat of oil bound distemper on old surfaces of walls including preparation of surfaces complete all as specified & directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred by Engineer-in-Charge.

M&L for one coat of white wash on old surfaces of walls including preparation of surfaces, complete all as specified & directed.

M&L for preparing new surfaces of walls and applying three coat of white wash on new surface, complete all as specified & directed.

M&L for three coats of white wash on new surfaces of ceiling including preparation of new surfaces of walls, complete all as specified & directed.

M&L for one coat of white wash on old surfaces of ceiling including preparation of surfaces complete all as specified & directed.

Preparation of old wood or wooden based surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified & directed.

M&L for one coat of synthetic enamel paint on old surfaces of steel including prepration of surfaces, complete all as specified & directed.

M&L for one coat of snowcem ( cement based paint) on old surfaces of walls, including preparation of surfaces, complete all as specified & directed.

Material and Labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specification & instruction including preparation of surface, complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab minimum size 450 mm x 300 mm, 20 to 25 mm thick in riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white cement paste pigmented to the match the shade of tiles laid over and including M&L for 15 mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.

M&L for applying one coat of Dr Fixit pidecrete urp in sunken floor portion of toilets & bathroom, chajja, staircase etc. by using URP+ cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush etc. complete all as specified and as directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 40 mm complete all as specified and directed.

Material and labour for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet in tile profile sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws@ 300mm c/c including plastic plugs etc complete all as specified and directed.

M/s Verma Construction Company

NAV NIRMAN BUILDER

Aman Enterprises

B D BATRA AND SONS

ADP Engineering

M/s RAMESH KUMAR VERMA CONTRACTORS