PROVN OF TEMPORARY COVERED SHED FOR PARKING FOR VVIP AND VIP VEHICLES BEHIND HUB BLDG NO P 197 AT R AND DE E DIGHI AND CERTAIN MINOR REVENUE WORKS AT R AND DE E DIGHI PUNE 15

Amount

B/R PORTION Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kind of soils complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in post holes(or similar holes ) each n.exc 0.50 Cum, and getteing out, returning filing in and ramming earth with broken rubble mixed with earth around in layers n.exc 25cm, watering etc and removing surplus soil n.exc 50m and making good surface in loose/soft soil complete all as specified and directed.

M&L Plain Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed.

M&L Plain Cement concrete 1:2:4 Type B 2 (using 40 mm graded aggregate ,in foundations, filling and post holes mass concrete complete all as specified and directed.

S&F rolled sections as in main and crissed beams, hip and rafters etc, fixed with angle cleats or other connecting plates, rivets, nut bolts etc, complete all as specified, conforming Fe 410W (Gde E-250) Quality B complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as in North light curves complete all as specified and directed.

M&L for PCC block masonry with soild blocks Type C1 1 :3:6 using (20 mm graded coarse aggregate) exc 10 cm in width and setting in CM 1 :6 complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on other then fair faces of PCC Block , finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered suraces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Returning, filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated soil exceeding 50 m and not exceeding 100m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

M&L Reinforced cement concrete type B0 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F TMT steel bar 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia securing with clips complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surfaces of conrete flat complete all as specified and directed.

S&F 500 liters capacity rotational moulded polyethylene triple layer water storage tank on terrace (at all floor levels), IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, including connecting outlet and overflow pipes, inclusive all fitting , high pressure , with polythene float and fly nut , nipple complete, screwed for iron pipe or brass ferrule hoisted and fixed in position complete all as specified and directed.

Supply and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20mm bore complete all as specified and directed.

S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F GI water tubing medium grade galvanised with all fitting complete etc fixed to walls, floors and ceiling 20 mm bore complete all as specified and directed.

M&L for hardcore of broken stone or boulder gauges n.exc. 63mm deposited spread and leveled in layer n.exc. 15 cm thick watered and rammed and true surface complete all as specified and directed.

M&L for mooram/ Red bajari filling in floor or pavings, laid in layers n exc 15cm thick, spread,levelled and rammed including watering complete all as specified and directed.

M&L for damp proof course 40mm thick in PCC 1:2:4 type B0 with WPC @ of 3% of cement weight to horizontal or vertical surface including necessary formwork complete all as specified and directed. Note :- Water proofing compound will be measured and paid seperetly under relevant item.

Supply only Integral water proofing compound (I.S.I marked on packing) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in floor/plinth protection, finish even & smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on newly plastered surface on wall including preparation surface complete all as spd and directed.

S&F PVC door frame of size 50x47 made out of 5mm wood grain printed PVC sheet, reinforced with MS square tube complete all as specified and directed.

S&F 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods.MS frame shall be covered with heat maulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and directed.

S&F cold rolled mild steel medium weight butt hinges 100mm size complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F Aluminium anodised Cast type handle of 150mm size complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqmin each pan complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F mild steel ventilator /window with top hung shutter incl, MS peg stay complete all as specified and directed.

S&F GI water tubing medium grade galvanised with all fitting complete etc fixed to walls, floors and ceiling 15 mm borecomplete all as specified and directed.

All as per items No 38.00 above but 20 mm dia complete all as specified and directed.

S&F vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia, CP grating and PVC connection 600mm long high pressure with PTMT nut complete all as specified & directed.

S&F for PVC connections 45 cm long superior quality with PTMT nut on both side complete all as specified and directed.

S&F china ware Urinal bowl flat back(465x355x265 mm) complete fixed with plug and suitable length and size of waste pipe complete all as specified and directed.

S&F PVC 10 ltrs capacity syphonic action, valve type flushing cistern low level of required colour including basket bend, PVC connection including taking down complete all as specified and directed.

S&F vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, flush pipe for joining etc complete all as specified and directed.

S&F 15 mm dia stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed down both ends for iron pipe or for brass ferrule fixed all as specified and directed.

S & F of 20 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm dia bib tap cast copper alongwith crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Mild steel CP grating 125 mm dia complete all as specified and directed.

S&F towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450mmx300mmx7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick screeding bed in cement mortar 1:4 complete all as specified and directed including taking down old screed complete all as specified and directed.

M&L for coloured Non Skid Joint less ceramic tiles (non-skid) of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed including taking down old screed bed complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes any length and in any position (with clamps in wall) complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SRW) vent cowl for 110mm dia PVC pipe complete all as specified and directed.

Providing and fixing powder coated louvered type aluminium ventilators, including 3mm thick figured glass strips , stainless steel wire cloth and opening for suitable exhast fan (250mm sweep) in aluminium ventilator shutters with EPDM rubber/neoprene gasket etc. complete as per directions of Engr in charge.

S&F Framed work Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for rubber moulded Chequered cement concrete tiles with white cement and pigment area n exc .09 Sqm, 22 to 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete in repairs complete all as specified and directed.

Providing and applying Aliphatic polyurethane coating in the existing surface. System includes:- (a) Surface preparation: Removes all loose particle,latiances and oil particles. If any andulation and uneven surfaces to be grind by mechanical means prior to cementitious underlay primer application. Any necessary repairs- Potholes, cracks etc should be carried out using Epoxy putty or Renderoc FC. (b) Application of Cementitious underlay Primer & Underlay:- The substrate should ne pre-soaked with clean water for 4 hours immediately prior to application of Nitoflor Cemprime 1. Before proceeding with the appliation of Nitofl or Cemprime 1, the surface should be in a saturated surface dry condition, with no free standing water. The substrate must be primed using Nitofi or Cemprime 1(without any dilution) and allowed to reach tacky state. The primer should be brushed into the floor by broom. Spray or roller application is not recomended as insufficent material will be applied. When the first coat of the primer is touch dry, a second coat of Nitoflor Cemprime 1 should be applied to the substrate in the similar manner. For highly porous substrates, a third coat of the primermay be applied with Nitoflor Cemprime1. (c ) Application of Self smoothing cementitious underlay:- Providing & Applying 15mm self smoothening underlay should be poured over tack free primed surface and spread evenly. coverage is 35.25kg/m2 (i) Use guides/side forms of height to match desired FFL(Finished floor level) poured mixed material in between forms, level evenly with Gauge Rake , spread and tool with Squeegee trowel, Steel smoother to get even finish. (ii) Moist curing for 1-2 days by sprinkling water . Forming control to match control joints of base or forming panels of size not exceeding 50Sqm. (d) Application of PU Coating:- Providing & applying 2 component aliphatic polyurethane coating. It possess good resistence to long term exposure of UV rays and chemical attack cured coating is resistant to high humidity, corrosion and abrasion. (e) Base Coat: - Apply Epoxy base coat to at primed surface broadcasted with antislip grains at an application rate in the range of 0.2 to 0.5ltr/m2 per coat depending on the size of antislip grains. (f) Wear Course Apply Traffi cguard wear Course to the Epoxy base coat at an application rate of 0.1-0.2ltr/M2(100-200 microns wft) per coat. Prior to traffiking allow the following cure periods. Foot traffi c : 24 hrs @ 25degree C or 18 hrs @35 degree C Vehicle Traffic c : 5 days @ 25degree C or 72 hrs @ 35 degree C Note : The Making and colour coding shall be as the Indian Basket ball court standards

Taking down Chowkhats or frames n exc 1.5 sq. m each (without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frame) complete all as specified and directed.

S& F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws ,hinges, aluminium towerbolts and handle. complete all as specified Add to for powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

S & F sheet glass, ordinary quality,4.00 mm thick in squares n exc 0.5 sq. m each pane as specified

M & L for galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 605x 605mm size of grid Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S&F in 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frameworkorwith staples on snap grid complete all as specified and directed.

Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer including wall care putty to make surface even and smooth, preparatory to distempering, priming plastered and other surfaces on existing plastered surfacecomplete all as specified and directed.

Preparation of newly plastered surface of wall, applying two coats of cement based paint over a coat of exterior primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and as directed by Engineer-in-Charge.

Taking out existing cement concrete interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L painting with synthetic enamel paint over cement concrete kerb stones of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

E/M PORTION Taking down carefully unserviceable sub main wiring including casing caping from wall/ceiling surface etc.

Taking down unserviceable DBs/MCB SP/SPN/Isolator of any rating & size carefully disconnecting and making good disturbed surfaces complete all as directed.

Taking down Copper/ aluminium point wiring (light/ fan/socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses pendent / brackets holders, regulators, unsv light fittings, etc removing material for taking credit and making good disturbed surfaces of walls, floors etc all as directed.

M & L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC casing caping fixed to walls / roofs / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates with frame and modular flush boxes for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and directed. (a) One light point controlled by one switch.

(b) One ceiling fan /exhast fan point controlled by one switch and one regulator.

(c) One 3 pin switch socket outlet point 5 Amps on independent board.

(d) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2x4.0sqmm + 1x4.0mm earth wire size.

S & Fix modular switch1 way 6A, 1 module

S & Fix modular switch1 way 16A, 1 module

S & F ceiling rose surface backlite 65x50mm 3 terminal, PVC polycarbonate, insulated body

S&F Modular step type,electronic fan regulator,two module,120Watts,complete all as specified and directed.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping/conduit with its accessories all as specified and directed by Engr-in -charge. (a) 2x6.0 sq mm and 1x4 sq mm as earth wire

S&F sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door,including flushed on walls and making good disturbed surfaces and suitable for mounting MCBs all as specified and as directed

S & Fix MCB, single pole and neutral 240 volts, 6 to 32 Amps, all as specified and as directed.

S & Fix MCB, single pole, 240 volts, 6 to 20 Amps, all as specified and as directed.

S & Fix Suspended LED Light fittings 04 feet type not less than 25 watts with aluminium extruded housing including neceesary suspend system for required leng including all necessary fixing aarngements in ceiling connecting wires from ceiling rose all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating, inverter technology of capacity 2 TR including outdoor mountong brackets, suitable length as required at site of copper tubing with insulation and drain pipes and etc all as specified and directed.

Supply and Fix 5 KVA stabilizer including all connection accessories all as directed Make: V-Guard or equivalent

M&L for Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced for making hole for split AC piping including making good the disturbed sufaces and packing as directed

M&L for point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V,l FRLS grade with moultistranded copper conductor ISI marked drawn through PVC conduit duly cancealed modular cover plates and modular flush boxed for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulted unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell and making good the distributed surfacess completely matched and finished with existing surfacess all as directed and specified by Engr-in-Charge. (a) One light point controlled by one 6 Amps one way switch

(b) One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

(c) One 3 pin socket out let 6 Amp point on independent board

S&F socket combination out let 2/3 pin 6 Amps modular type all as specified and directed.

S&F aluminium housing box type suitable for 18/20 watts single side LED tube light rod including, necessary braket, clamps, incluidng bolts, nuts & washers for fixing arrangement etc complete I with new LED Batten for LED tube light 18/20 watts with necessary braket, clamps, incluiding bolts, nuts & washers for fixing arrangement etc complete all as specified and directed.

S&F 2 feet LED luminaire fitting 10 watts with polycarbonate housing & integrated electronic driver, necessary braket, clamps, incluiding bolts, nuts & washers for fixing arrangement, testing etc complete all as specified and directed.

S&F exhaust fan, ac, single phase, 240 V, 300 mm sweep, metal body with metal blades metal louvers, connected with 3 core 1.5 Sqmm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed.

S&F PVC Body Exhaust fan AC single phase 220 to 240 volts 900 RPM of size 250 mm sweep connected with 3 core 1.5 Sqmm copper conductor cable from ceiling rose to exhaust fan fixed on ventilator and fixing arrangement complete all as specified and directed.

Making hole/ cutting/ drilling in the existing wall majually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead including plastering and making the wall matching with the existing wall.

Shri Sant Cosntruction (BID ID -3153842)

AJINKYA VIKRAM GAIKWAD (BID ID -3153778)

Mukund Engineers and Contractors (BID ID -3154055)

greenstone construction (BID ID -3158708)