WELCOME MAINT TO OFFRS MD ACCN AND PERIODICAL SERVICES TO CERTAIN MD OTM ACCN OF CERTAIN UNITS AT JAMSHEDPUR MIL STN UNDER GE RANCHI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site .

Taking down shutters of any description n exc 1 sq. m each and removal from site complete

All as per Item No 3 above but area .exc 1 sqm but n exc 2 sqm each

S & F for 2nd class hard wood (SAL) plain solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fitted to chowkats .

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2020 complete all as specified and as directed.

S&F as in hold fasts; conforming to Fe -290 Gde E-165 complete.

M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate for fixing of hold fast and making good .

S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a)

S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.

S&F particle board core factory made solid PVC Moulded door shutter 28 to 30mm thick (stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle Board Core supplying and fixing in frame at site as per specification and drawing.

S&F factory made wire gauzed PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded both side prelam PVC Sheet and stile & rails feathered at edges having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap inside for top rail and bottom rail.panel will be wire gauze in lieu of prelam sheet ,the wire gauze shall be wrapped on an additional square 8mm M.S.Solid tube and this tube shall be welded to M.S Tube.the wire gauge shall be stretched to tighten firmly supplying and fixing in the frame at site as per specification and drawing.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

S & F 100 mm Butt hinges medium weight medium cold rolled mild steel .

S & F 75 mm Butt hinges medium weight medium cold rolled mild steel .

S & F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F of 150 mm size aluminium handles cast type anodised.

S&F of 100 mm size aluminium handles cast type anodised.

S&F 100 mm Haps & staples safety type aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane,but figured glass pin headed type n.exc 0.50 sqm each complete.

S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod complete all as specified and directed

S&F brass chromium plated decorative bracket fixed to wall .

M&L in repairs 2nd class hard wood plain fillets, square, rectangular or triangular in section of sectional area exc 13 sqcm & n.exc 25 sq.cm wrought , secured with nails or brads,

All as per item 29 above, but sectional area not exc 3 sq.cm

S&F floor door stopper 150 mm of brass body and tongue anodised with hard drawn steel spring fixed .

All as per item No 31 above ,but fixed in repairs

Demolition of cement concrete (reinforcement) any description and positin not other wise specifically.

M & L RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc.

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) rough finished complete.

M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

M & L Mild steel bars 6mm to 8mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M&L half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc .

M&L rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:6) making finished even & smooth without using extra cement .

M&L rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:4) making finished even & smooth without using extra cement using WPC (WPC will be measured separately).

Supply only integral water proofing compound.

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes .

M & L 10mm thick rendering in Cement Mortar 1:4 on fair faces of brick work or concrete surface to receive wall finishes.

M&L coloured/ printed non-skid joint free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match .

M&L coloured/ printed non-skid joint free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match .

M&L coloured glazed ceramic tiles in vertical surface 450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces

Demolition of stone slabs and tiles of any description or thickness in floors, aprons

M&L 18 to 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required.

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm.

S&F Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long complete

Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

Taking up or down steel tubing and connection of 20 mm bore complete all as specified directed at site.

Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,.

S&F 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.

Dismantling of boarding any description, fixed in any position with screws all as specified.

S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard all as specified and directed.

Supply and fix Three Track Sliding powder coated aluminium Window of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.20mm thick and Shutter section of sizes 39.40 mm x 17.70mm x 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thick tinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40 mm and fixed with aluminium wire staples complete .

Supply and fix Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwsetc. complete all as specified.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position .

Dismantling water tanks Capacity in exc 250 & n exc 500 litres and removing to store

Dismantling water tanks Capacity in exc 500 & n exc 1000 litres and removing to store

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule.

S&F in repair 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule .

S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F PVC bends any radius 100 mm dia

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing complete .

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.

S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.

S&F in repair 10 ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket .

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union .

S&F Chromium plated toilet paper holder with flap of standard size as approved by GE.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.

S&F 32mm flexible pipe for urinals and wash basin.

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repair PVC cabinet looking mirror box type of size 355 x 455 mm all as directed by EIC (prayag or equivalent)

S&F Chromium plated 600mm long towel rod with brakets as approved by EIC.

S&F in repair white EWC sheet cover all as specified.

S&F CP Health fauset with 1 Meter PVC Tube and hook

M&L in repairs of Cast iron Nahani trap , diameter of outlet in 100 mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), Complete all as specified and directed.

S&F in repair stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces .

S&F in Repair CP Towel ring, square type including CP screws complete. (Make : JAQUAR Code. ACN-1121BN or equivalent)

S&F in Repair CP Hand Shower with rubit cleaning system, size 100 x 55mm and 130mm long arm including 1.5m long flexible stainless steel hose complete complete (Make : CERA Cat no. CG-F7030101 Rain shower, Cat no. CG-104 shower arm)

S & F in Repair 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.( make- Esscco cat no TQT 512A)

S&F in repair CP soap tray fixed with rawl plugs complete.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no MQT-5178)

S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC..(make- Essco, cat no SQT-516KN)

Supply and fix PVC connections 15 mm size with PTMT nuts of length 900mm.

S&F towel ring square with round flange.

M&L preparation of new plasterd wall surfaces and applying two coat of oil bound distemper of approved colour and shade over one coat putty .

M&L preparation of old decorated surfaces on walls and applying one coat of oil bound distemper of approved colour and shade

All as per item No 106 above, but two coats of oil bound distemeper.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete.

All as per item No 108 above but as on celling.

Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high

Writing stops, commas, short lines, dashes, hyphens, bracket etc.

M&L preparation of new plasterd wall surfaces and applying two coat of cement based paint of approved colour and shade

M&L preparation of old decorated surfaces on walls and applying one coat of cement based paint of approved colour and shade

All as per item No 113 above, but two coats of cement based paint

M&L preparation on new wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coat of synthetic enamel paint of approved colour and shade over pink primer.

M&L preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint of approved colour and shade

M&L for preparation of old painted steel or iron surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Brushing neat cement slurry with 3kg of cement per sqm.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor using liquid water proofing compound to make surface in level complete (liquid WPC shall be measured seperatly).

Material & Labour complete removal of existing treatment on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces specified and directed

S&F PVC door bottom weather strip door brush sweep seal .

M/S Manoj Kumar Sinha