8165/GE/SMB/T-75/2025-26 SPL REPAIRS TO BLDG NO P 12 OR MD ACCN AT PAREL LINES AND PROVN OF ADDITION ALTERATION OF BLDG NO T 47 MI ROOM OF MIL HOSP AT MIL STN SAMBA

Amount

M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,completle all as specified and directed by by Engr-in-charge.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces rendering to be finished even and smooth without using extra cement ,completle all as specified and directed by by Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including applying 2mm thick putty for smoothening of surfaces etc ,completle all as specified and directed by by Engr-in-charge.

M&L for Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) including water proofing compound in 2nd layer (supply of WPC paid seprately) complete all as specified and as directed by Engineer-in-charge.

supply only Liquid water proofing ,completle all as specified and directed by by Engr-in-charge.

M&L for Applying two coats of cement base paint including prepration of new plastered surfaces of wall complete all ,completle all as specified and directed by by Engr-in-charge.

M&L for Rendering 5 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement.

Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.

M&L for Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including applying base of putty 3mm thick for smoothening of surfaces etc,completle all as specified and directed by by Engr-in-charge.

M&L for Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding ,completle all as specified and directed by by Engr-in-charge.

Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed.

M&L for Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles ,completle all as specified and directed by by Engr-in-charge.

M&L for brick work with sub class ‘B’ brick straight or curved on plan to any radious in half brick thick wall built in cement mortar 1:4 ,completle all as specified and directed by by Engr-in-charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,completle all as specified and directed by by Engr-in-charge.

M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified & directed.

M&L for Glazed coloured ceramic tiles joint free in vertical surfaces of size 300 x 450 mm x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3 on brick /concrete surfaces ,completle all as specified and directed by by Engr-in-charge.

M&L for non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, ,completle all as specified and directed by by Engr-in-charge.

Description all as item No 17 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.

M&L for RCC (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including demolition of reinforced cement concrete of any discription, ground to 2nd floors and removing the rubbish from the premises complete all as specified.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, ,completle all as specified and directed by by Engr-in-charge.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete,completle all as specified and directed by by Engr-in-charge.

M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n exc. 10cm wide for fair finished surfaces of concrete,,completle all as specified and directed by by Engr-in-charge.

M& L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marbles complete all as specified & directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt).

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section with 10mm squar guard bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-354/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,completle all as specified and directed by by Engr-in-charge.

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer ,completle all as specified and directed by by Engr-in-charge.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or grith and applying one coats of synthetic enamel paint all as specified.

S&F Factory made 35mm thick, IInd class H.W rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,completle all as specified and directed by by Engr-in-charge.

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters ,completle all as specified and directed by by Engr-in-charge.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,completle all as specified and directed by by Engr-in-charge.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint ,completle all as specified and directed by by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge

S&F butt hinges of mild steel cold rolled medium weight of size 100mm ,completle all as specified and directed by by Engr-in-charge.

M&L for Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class H/W plain fillets square rectangular or trangular in section , clean swan secured with nails exc. 13 but n. exc 25 Sqcm in section.

S&F for Harrison rails, mild steel, anodised aluminium alloy with fixing brackets, stops, rollers etc. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings),completle all as specified and directed by by Engr-in-charge.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,completle all as specified and directed by by Engr-in-charge.

S&F Sheet glass, ordinary quality 2.5 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pane ,completle all as specified and directed by by Engr-in-charge.

All as per item no 42 above but fixing as in repair incl hacking out old glassess from metal frame ,completle all as specified and directed by by Engr-in-charge.

S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,completle all as specified and directed by by Engr-in-charge.

S&F Aluminium handle 150 mm long cast type anodised, ,completle all as specified and directed by by Engr-in-charge.

S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section ,completle all as specified and directed by by Engr-in-charge.

S&F M.S. rat tail helical door spring (300 mm long) including roller and roller plate ,completle all as specified and directed by by Engr-in-charge.

S&F in repairs mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work ,completle all as specified and directed by by Engr-in-charge.

Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing ,completle all as specified and directed by by Engr-in-charge.

S&F in Repair Vitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting stands incl 32mm dia waste pipe,waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair C.P. Bib taps(Fancy type) 15mm bore cast copper alloy with crutch or butter fly handle,screwed down,screwed for iron pipe or brass ferrule ,completle all as specified and directed by by Engr-in-charge.

S&F in repair C.P. Angle valve/stop valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions ,completle all as specified and directed by by Engr-in-charge.

S&F in repair C.P. pillar tap( fancy type 15mm bore)cast copper alloy with capsten head screwed down high pressure with or without letter 'Hot' or 'Cold' with long screw shank and flt nuts screwed for iron pipe ,completle all as specified and directed by by Engr-in-charge.

S&F in repairs tubular towel rail,brass chromium plated, 60cm long between flanges complete all as specified and directed

S&F in repair PVC connection 15mm size, 450mm long with PTMT nut ,completle all as specified and directed by by Engr-in-charge.

S&F in repair 10 litres Capacity PVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs of High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any ,completle all as specified and directed by by Engr-in-charge.

S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc.,completle all as specified and directed by by Engr-in-charge.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantilever brackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm ,completle all as specified and directed by by Engr-in-charge.

Disconnecting of existing water tanks exc. 250 Ltrs but not exc 500 Ltrs capacity, removing to store.

S&F Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified

Taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store ,completle all as specified and directed by by Engr-in-charge.

Taking down GI pipe 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors ,completle all as specified and directed by by Engr-in-charge.

S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors,completle all as specified and directed by by Engr-in-charge.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed.

M&L Providing, cement concrete1:2:4 Type B-1(using (20 mm graded ggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, ,completle all as specified and directed by by Engr-in-charge.

S&F in repair Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union ,completle all as specified and directed by by Engr-in-charge.

S&F in repair 15mm bore stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,,completle all as specified and directed by by Engr-in-charge.

S&F in repairs UPVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

S&F in repairs UPVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

S&F in repairs UPVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

S&F in repairs UPVC(SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

S&F in repairs, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F in repairs, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F in repairs, UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F in repairs, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F in repairs, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F in repairs UPVC (SWR) , reducers 110 mm dia complete all as specified.

S&F in repairs UPVC (SWR) vent cowl 75 mm dia complete all as specified.

S&F in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

M& L cement concrete as in sunken floor ,mass concrete type E-2 1:5:10 40 mm graded stone aggregate including demolition of existing concrete in sunken floor of any description and in any position complete all as specified

M&L Rendering 10 mm thick on fair faces of brick or concrete surface walls and floors in cement mortar 1:4 , mixed with water proofing compound , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. (WPC will be measured and paid seperetly).

M&L cement concrete type B-0 ,1:2:4 using 12.5 mm graded aggregate as in base / levelling course including demolition of existing PCC of any description complete all as specified.

Machine cut kota stone slab flooring 20-25mm thick including Screed bed (1:4) or bedding layer of mortar 20 mm thick for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified & directed

M&L Rendering 10 mm thick on fair faces of brick or concrete surface walls and floors in cement mortar 1:4 , finished even and fair to receive tiles all as specified and as directed by Engineer-in-charge.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item No. 85 ,completle all as specified and directed by by Engr-in-charge.

Dismantling of Bricks (laid flat or on edge) or brick tiles/cemented tiles in floors,roof,terrace, channels,kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar complete all as specifred and as directed.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specifred and as directed.

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster/demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof including mixing of water proofing compound as per manuacture instruction finished and laid to required slope complete all as specified and as directed. (WPC shall be measured and paid separately)

M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of roof finished fair & even and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L APP modified polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application incl Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed. Make :- IWL

Demolition of cement concrete in groun floor and pavings n. exc. 15 cm in thickness (below or above GL).

M&L for 50 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), ,completle all as specified and directed by by Engr-in-charge.

Chequered Coloured cement concrete tiles 30cm x30cm x25mm thick, , set, with grey cement and pigment , jointed and pointed in neat cement slurry in floors over and incl 15 mm thick screed bed in CM 1:4, including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc.complete all as spd & dir.

Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc all as spd.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work, complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat, hollow sections) including distance pieces, cleats, welding/rivets/nut/bolts/washer etc, complete all as specified.

S & F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coulour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/ridge fixed with self tapping screws as specified.

Providing and fixing of V-board-"Visaka"/E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall comprise of main runner made from 0.33mm thick G S sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers/suspended with 2 run of 2 mm dia of GI wire to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600 mm to be supported independently. 600x600 mm modulesto be formed by fitting 600 mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS shgeet of size 19x19mm and 300 mm long of white colour all as specified by manufacture instruction.

M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed.

M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls.

Material and labour Non skid Ceramic coloured tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors/Dedo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4.

Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. (Sample as approved & Kept in GE's sample room)

Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4.

M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete.

Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)

S&F in repair 15 mm bore Bib Cock with wall flange cast copper alloy, chromium plated fancy type ,complete all as specified.

Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. .

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over a coat of wall care putty of 3 mm thick and one coat of primer complete all as specified.

Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and asdirected by Engr-in-charge.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil bound distemper on walls, pillars,cornices surface including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F in repair Vitreous China, wash basin white, flat back , size 400mmx300 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.

S&F 15mm bore CP jet spray for Padestal pattern WC all complete and as directed.

S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement.

Material and labour for (a) repairing aluminium shutters ( Door/ Window) including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable all as specified and directed by Engr-in-charge.

S&F in repair 5mm thick Polycarboneted roof sheet of 1st quality all as spd & dir by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc all as specified and directed by Engr In Charge

M&L for point wiring using FRLS PVC insulated unsheathed /multistranded copper conductor cable 1.5 sq mm drawn through and including pvc conduit marked and of appropriate size as specified, fixed in conceeled of wall/ceiling with mild steel sunken box and bakelite sheet 3 mm thick including all fittings such as tees, bend and junction boxes etc complete for following:- Make of Cable :-Havells/Polycab or equivalent Make of Conduit:-As per IS

One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing)

All as per Srl Item No 130.00 above but for call bell point complete all as specified and directed.

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

All as per Item Srl No 130.00 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing).

S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 16 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F amp rating 240V, 10KA 'C'curve miniature circuit breaker (MCB) of SPN 63 amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F in replacement SPN 40 to 63 Amp, type 'C'10KA, 240 Volts.

S&F in replacement MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts.

S&F Switch piano, flush type 5 Amp, One Way.

Supply and fix bell push flush type with indicator 6 Amps complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin 5 Amp.

S&F Switch piano, flush type 15 Amp, .

S&F socket out let 2 in 1, 5 & 15 Amp flush type.

S&F ceiling rose 3 terminal size 50*65 mm surface type.

S&F Electronic fan regulator flush mounting step type 300-400 watts complete.

Supply and fixing electronic bell ding-dong AC 230 Volts single pole complete all as specified and directed.

S&F LED Lights fitting 1x18 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F recess mounted LED fitting 36 W of size 600mmx600mm with diffuser pre wired LED Panel and inbuilt LED driver suitable for 36W 240V 50Hz fix on false ceiling and necessary clip as specified and directed by Engineer-in-charge.

S & Replacement for angular type Lamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified '

Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion.

S& F LED Street light fitting 35 watt 230 v AC out door type with high pressure die complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete,including bracket.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation of stay assembly and laying of LT/HT cables in soft/lose soil and getting out, complete all as specified.

Removal of excavated material n.exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point.

Sand cushioning to under ground cable using fine sand (8 cm before & 15 cm after laying of cable) complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type soil complete all as spd and directed.

Brick sub class 'B' of standard size for protection of cable, brick laid across the cable all as specified.

Material and labour for sub class 'B' brick old size covering laid dry, flat transversely along the length of cable on sand cushioning with width equal to the length of the brick complete.

Supply, fixing & laying GI pipe light grade 50mm bore in trench, under floor, wall and on pole for cable protection.

S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

M & L for submain wiring with copper conductor PVC insulated FRLS of size 2 x 10 sqmm alongwith earth wire of size 1 x 10sqmm on wall surface with and including PVC casing caping of suitable size complete all as specified and as directed by Engr in Charge.

Supply and fixing including taking out and removing old unserviceable XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3.5 core in trenches, through pipe, under culvert or in air complete all as directed including using existing cable cushioning and cable protection complete as directed.

S&F Single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 20 Amp complete all as spd and directed

Supply, Laying, Testing and commissioning of LT cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 Core complete all as specified and directed.

Taking down the unserviceable/ brunt sub main wiring from wooden batten and M&L for submain wiring in and including PVC conduit 1.8mm thick, 20mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 4 sqmm (FRLS) and one run of PVC insulated unsheathed multistranded copper conductor 4 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 4 sqmm plus one run 4 sqmm of earth wire will be measured as 1RM). Note : (a) Insulation test of point wiring. (b) colour coding is to be maintained. (Ph-Red, N-Black, Earth-Green)(Make of 4 sqmm copper wire: Havells or technocommerically equivalent make of Grandlay/Finolex.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

THAKUR BUILDERS AND CO (BID ID -3495271)

M/S RAJESH SHARMA & CO. (BID ID -3489537)

Alishan Builders (BID ID -3489509)

Manminder Singh and Co (BID ID -3489250)