REPAIR TO PLUMBING AND SANITARY FITTINGS FOR TOILET BATH AND KITCHEN AND OTHER MISC WORKS IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR

Amount

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F for steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F for steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F for steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or backinlet and integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed

S & F in repairs Vitreous china urinal half stall type ,white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat black of size 550x 400 mm (excluding taps), waste, chain and plug including brackets complete all as specified and directed

S&f in repair vitreous China wash basin ,angle back,size 600 x 480mm white including cutting for and pinning in ends of brackets or ereccting stand,chain and plug and porcelain stopper etc complete all as specified and as directed

S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia, 450mm long etc complete all as specified and directed.

S&F in repair 15 mm dia bib taps cast copper alloy with Chromium plated cruch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F repairs 15mm bore dia concealed/ angular stop valves chromium plated fancy type , screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S&F in repairs stop valves 15mm , cast copper alloy , fancy type chromium palted screwed down , high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed.

S&F in repairs grating doom 100mm dia PTMT (Min weight 25 grms) complete all as specified and directed.

S& F in repairs brass chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S & F in repair gate / globe valves 20 mm bore cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of complete all as specified and directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm complete all as specified and directed.

S & F of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe in repair complete all as directed.

S&F in repiar CP waste fittings brass chromium plated for sink 40mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other in fixed all as specified and directed.

S&F in repiar CP waste fittings brass chromium plated for sink 32mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other in fixed all as specified and directed.

S & F in repairs for Low density polyethylene (LDPE) 40mm pipes of pressure rating 6kgf/sq cm complete all as specified and directed.

S&F in repair 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wall Mixture three in one including Provn of OH shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wash Basin Mixture for hot & cold water with long shank and fly nut complete all as specified and directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

Supply & fixed in repairs PVC connection 15 mm size , 450mm long with PTMT adopter,check nuts and washer on both sides complete all as specified.(Make : PRAYAG, SYMET’ manufactured by M/S Prayag Polymers (P) Ltd./ POLYTUF manufactured by M/S R S Industries, Delhi,/ SHAKTI brand manufactured by M/S Shakti Enterprises New Delhi.) complete all as specified and directed.

Supply & fixed in repairs PVC connection 15 mm size , 600mm long with PTMT adopter,check nuts and washer on both sides complete all as specified.(Make : PRAYAG, SYMET’ manufactured by M/S Prayag Polymers (P) Ltd./ POLYTUF manufactured by M/S R S Industries, Delhi,/ SHAKTI brand manufactured by M/S Shakti Enterprises New Delhi.) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.

S&F in repairs 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs 75mm dia Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Dismantling water tanks exc 500 and n exc 1000 ltr capacity complete all as specified and directed.

Dismantling water tanks exc250 and n exc 500 ltr capacity complete all as specified and directed.

S& F 500 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule complete all as specified and directed.

S& F 1000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including 20mm ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule complete all as specified and directed.

S&F, in repair, chromium plated glass shelf of size 550mm long complete all as specified and directed. As per Cat No AQN-7771 of Make Jaquar or equivalent Make complete all as specified and directed.

Supply & Fixed in repairs Corner Glass Shelves (code ACN-1173 of Jaquar make or equivalent make as approved by GE) complete all as specified and directed.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per Cat No. 554 of Make Prayag or equivalent Make complete all as specified and directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. As per Cat No ALE -547 of Make : Essco or equivalent complete all as specified and directed.

Supply & Fixed in repairs for 15 mm bore concealed Stop valves, (cat part No. CQT 23083 of Jaquar make or equivalent make & model as approved by GE) complete all as specified and directed.

Supply & Fixed in repairs Two way bib cock (code ARI-39041 of Jaquar make or equivalent make as approved by GE) complete as specified and as directed.

Supply & Fixed in repair for Bib taps (Continental code CON-037 of Jaquar make or equivalent make & model as approved by GE), 15 mm bore fancy type complete as specified & directed.

Supply & Fixed in repair for 15 mm bore CP angle Stop valves, (Continental code CON -053 KN of Jaquar make or equivalent make complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. As per Cat No ACN -1153S of Make : Jaquar or equivalent complete all as specified and directed.

Supply & Fixed in repair for Towel Ring of (cat part No. ACN-1121N of Jaquar make or equivalent make complete all as specified and directed.

Supply & Fixed in repairs Towel Rail 600mm long stainless steel (code AKP 35711PS of Jaquar make or equivalent make as approved by GE) complete all as specified and as directed.

Supply & fixed in repair for Towel Rack 600mm long with lower hangers (Cat Part No. AHS 1581 of Jaquar make or equivalent complete all as specified and directed.

S&F, in repair, chromium plated, Soap dish holder complete all as specified and directed. As per Cat No ACN -1131N of Make : Jaquar or equivalent complete all as specified and directed.

Supply & Fixed in repair for extended wall hung WC with PP soft close seat cover, hinges, accessories set (code CNS - WHT-353S) and flushing cistern (code CNS - WHT-203) model of Jaquar make or equivalent make complete all as specified and directed.

Supply & Fixed in repair for Flushing plates (make moon, code CIS - CHR - 31181910X of Jaquar make or equivalent make as approved by GE) cistern and flushing pipe (exclusive of brackets) complete as directed.

Supply & Fixed in repairs for over head Shower150X150mm square shape single flow, chromium plated with Gray face plate (code OHS 35495 of Jaquar make or equivalent) as approved by GE complete as specified and as directed.

Supply & Fixed in repair for central hole basin mixer (Continental code CON-167 KNB of Jaquar make or equivalent make & model as approved by GE), 15 mm bore fancy type complete as specified & directed.

Supply & Fixed in repairs Bath Tub Mixer (code CON-271 KN of Jaquar make or equivalent make as approved by GE) complete as specified and as directed.

Supply & Fixed in repairs Sink Mixer (code CQT-23309 Jaquar make or equivalent make as approved by GE) complete as specified and as directed.

Supply & Fixed in repairs Wall mixer with connector for hand shower arrangementwith connecting legs, wall flannges and wall brackets for hand shower (code CQT-23267 of Jaquar make or equivalent make as approved by GE complete as specified and as directed.

Supply & Fixed in repairs Health faucet (code ALD-573 of Jaquar make or equivalent make as approved by GE complete as specified and as directed.

S&F, in repair, brass CP bottle trap ( with internal partition) 32mm bore with 250mm and 190mm long wall connection pipe complete all as specified and directed. As per Cat No ALD-769L250x190 of Make : Jaquar or equivalent complete all as specified and directed.

Supply & Fixed in repairs shower Arm (code SHA-479L300 of Jaquar make or equivalent make as approved by GE) complete as specified and directed.

Supply & Fixed in repairs hand Shower (code HSH-49537 of Jaquar make or equivalent make as approved by GE) complete as specified and as directed.

Supply & Fixed in repairs Flush Valve (code FLV-1015 of Jaquar make or equivalent make as approved by GE) complete as specified and as directed.

S&F in repairs PVC Connection (code ALD-805B of Jaquar make or equivalent as approved by GE) complete as specified and as directed.

Supply & fixed in repairs Double coat Hook (code AKP-35761P of Jaquar make or equivalent make as approved by GE) complete as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 35mm thick second class hard wood factory made panelled door shutters (any number of pannels) with panels of timber flat on both sides (feather edged) or of veneeved particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

S&F for 35mm thick second class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into squars with plain chamfered or rounded mitred and rebated sash bars any numbers and fitted to chowkats as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F for butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F for mild steel pressed handles oval type stove enameled black of size 150mm complete all as specified and directed by Engr-in-Charge.

S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

S&F for mild steel barrel tower bolts stove enameled with bright bolt length of bolt 150mm –ISI marked and fixed complete all as specified and directed.

S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F for mild steel sliding door bolts 300mm length, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

S&F factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including mild steel framed work such as grill gratings with ends of bars , spikes framed guard bars and similar workj confirming to Fe 290 Gde E-165 and applying one shop coat of red oxide primer complete all as specified and directed.

S&F, factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including mild steel framed work such as grill gratings with ends of bars , spikes framed guard bars and similar workj confirming to Fe 290 Gde E-165 and applying one shop coat of red oxide primer complete all as specified and directed.

S&F for factory made steel windows or ventilators with top hung shutter including hinges, steel peg stay, glazing bars including mild steel framed work such as grill gratings with ends of bars , spikes framed guard bars and similar workj confirming to Fe 290 Gde E-165applying one shop coat of red oxide primer complete all as specified and directed

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) including applying one shop coat of red oxide primer complete all as specified and directed

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

Supply and fixing 3 mm thick, figured glass ,pin headed type and glazing with oil putty in square n exc 0.5 sq.m each pane complete all as specified and as directed. Make of Glass : Modi Guard/Saint Gobin/Swastik

S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed.

S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 100mm –ISI marked all as specified.

S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 150mm –ISI marked and fixed complete all as specified and directed.

S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 200 mm –ISI marked and fixed complete all as specified and directed.

S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 75 mm complete all as specified and directed.

S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repair mild steel pressed handles oval type stove enameled black of size 125mm complete all as specified and directed by Engr-in-Charge.

S&F in repair mild steel pressed handles oval type stove enameled black of size 75 mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.

S&F, in repair, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F, in repairs, butt hinges, 100mm size, medium weight, cold rolled including welding where required complete all as specifed and directed.

S&F, in repair 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F in repair 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repair continuous (piano ) hinges, mild steel bright finish or electrogalvanised. Width of flape 30mm complete all as specified and directed.

S&F, in repair, 300mm long mild steel peg stay fixed with nut bolt/ screws and washers for factory made steel windows/ventilators complete all as specified and directed.

S&F, in repair, Mortice lock, brass, four lever, verticle type, size 100mm complete all as specified and directed.

S&F, in repair, double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed.

S&F in repairs 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 3 mm thick in square n exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.

Cutting chases, pinning in. through brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified and directed.

M&L for Vitriefied ceramic tiles 10mm thick DARK SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

M&L for Vitriefied ceramic tiles 10mm thick LIGHT SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

M&L for non skid ceramic tiles/ non skid tiles coloured, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Non skid ceramic joint free coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for glazed ceramic coloured tiles of size 300 x 200 x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately) complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in base finishing the surface even and smooth complete all as specified and directed.

M&L for sand cushion 50mm thick and well ramming including watering as required complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

M&L for coloured cement concrete chequered tiles 250x250x22 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

S&F, in repairs, 18mm thick ply, PVC sheet prelaminated on one side of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed.

S&F stainless steel kitchen basket in various type of basket , plaint basket height , 4" Thali basket 8" height Cup saucer 4" heigt and perforated cutlury basket 4" height all as specified and directed.

S&F hattich chennel for basket sizes 46mm wide complete all as specified and directed.

S&F stainless steel handle for basket size 6" complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L Rendering 10mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even and Smooth,without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

Supply only, integral water proofing compound. complete @ 3 % by weight cement complete all as specified and directed.

M/S CENTRAL REFRIGERATION AND ELECTRICALS

Kirti Chandeliya and Assosicates

M/s Om Infracon