Special repair works at Kanagavallipuram PRS in Thiruvallur District for the year 2023-2024

Amount

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

21.2) Supplying and fixing of Teak Wood wrought and put up for frames a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

30) Finishing the top of flooring with cement concrete 1:3 20 mm thick Ellispattern Flooring

40) Painting the new wood work with two coats

52) Supplying and Laying of PVC ASTM pipe a.20mm Dia

b.25mm Dia

Electrical arrangement 74) Charges for Fixing Ceiling fan

112) Supplying and fixing of 300 mm dia sweep AC exhaust fan

Annexure 2.15) Supplying and filling with Stone Dust

3.1.3) C.C.1:5:10 for Foundation & Basement

6.2.3) Brick work in CM 1:5 (Wash stone) In Ground Floor

7.3) Supplying and fixing 300mm wide PVC EXPANSION JOINT in the 20mm expansion gap

8.2.3.2) Standrasied concrete grade of M20 in Second Floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") c) In Second Floor

18.1) Formwork using M.S.Sheet b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

21.5.2.2) Supplying and Fixing of UPVC solid Door

22.1) Supplying and fixing of Best Indian Teakwood panelled door shutters single leaf b. 900 x 2100 mm

23.1.8)) Supplying and fixing of Best Indian T.W. single leaf door shutters using 9mm thick phenol bonded BWR b) 1000 x 2100 mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass

23.5.6) Supplying and Fixing of Door stoper

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

31.1.2) Pointing the Terrace floor with one course of solar reflective water proof, heat proof and cool roof ceramic tiles over the roof with CM 1:3

33.2.1) Plastering in C.M. 1:5, 12 mm thick.

33.2.2) .Plastering CM 1:5 20 mm thick.

35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

50.1.3) Labour charges for removing existing precast slab CC1:3:6 50mm thick and re laying the same position

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

70.5.2) Supply and fixing of 4' 18 watts LED Tube Light

71.2.1) Supply and fixing of 63 Amps TPN Metal Clad Switch with Re-wirable Fuse Units

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletcronic Dimmer

77.5.1) Run off main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable(Open wiring)

77.7.1) Run off main with 2 wires of 2.5sqmm ( Open wiring)

82.3.1) Supply and fixing of LED Street lighting luminaries suitable for fixing of following watts LED lamp a) 30 watts LED lamp

b) 60 watts LED lamp

88.1) Laying shahabad stone grey colour of 20mm thick in C.M 1:3

88.2) Supplying and laying of polished shahabad slab /stone, 20mm thick (Gray colour) of approved qualty for florring in CM 1:3 ) 20mm thick

93.1) Plastering with CM 1:3, 12mm with WPC

112.1) Supplying and fixing of 225 mm dia sweep AC exhaust fan

144.2.2) Supplying and fixing of 100 Watts LED Flood light etc.

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 4C x 10 sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 C x 185 sqmm PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) a) 4C x 10 sq.mm. PVC LTUG aluminium armoured cable

170.7) Supplying and fixing of 100 AMPS Fuse unit

176.1.2) Supplying and fixing of Synthetic Moulded compound box

207.3.4) Painting the old walls with two coats with 1st class ready mixed plastic emulsion paint over a priming coat, including thorugh scrapping

207.6) Painting the old iron work with two coats of ready mixed first class synthetic enamel paint including thorough scrapping the old paint

209.5.1) Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry / ceiling plastering from roof

212.1) Dismantling the damaged Plain cement concrete in all floors

213)Dismantling the damaged brick works in cement mortar in all floors

217) Dismantling the damaged Pressed tiles laid over cement mortar and Weathering Cours

219.1) Supplying and fixing of Electrical materials of approved a) Supplying and fixing of Ceiling fan condenser

b) Supplying and fixing of 5 AMPS Switch flush type

c) Supplying and fixing of Calling bell heavy type

221.1) Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings

224.1) Dismantling the existing damaged RCC

235.3.2) Groove Cutting in between Roof beam bottom and Brick work top With groove cutting and filling with crack filler

235.3.3)Supplying and fixing of Stainless Steel floor Grating

242.2.2) Dismantling the damaged floor finish and dadooing walls in cement mortar with Mosaic tilex/Glazed tiles/Cuddapah slabs

243.2.1) Dismantling the Brick jelly concrete, existing floor finishing etc., without affecting the structure and removing the damaged existing IWC

254.1) Two legged scaffolding using 15cm dia casurna props 10.5m height in addition of 2.5m ht

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 15 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

344.2) Supplying & fixing of Bevelled edge mirror 500 x 400 x 5.5mm

366.2.2) Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3

383.4) Supplying and fixing of Flush tank

450.2.1) Supplying and fixing of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia

451.3.3) Supplying and fixing of the following PVC water supply fittings a) 12mm dia PVC Connection hose

b) 32mm PVC waste hose

c) 25mm dia PVC end cap

615.3.7) Supplying and fixing of Single phase 25A Motor Starter - 2 Module - Higher end

619.7) Supplying and fixing of 32mm PVC Ball valve

853.2.5) Repairing the Exting Damaged UPVC window

958.3) Supplying and Fixing of Wall mounted fan 450MM Dia

S.Sekar

Bidder Name

S.Sekar

KAVITHA BUILDERS