Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L1 | Accepted-AOC Lowest Rate | |
| 2 | L2₹31.5 L+₹1.9 L (6.59%)Rejected-AOC | L2 | Rejected-AOC Higher Rate | |
| 3 | L3₹34.5 L+₹5.0 L (16.9%)Rejected-AOC | L3 | Rejected-AOC Higher Rate | |
| 4 | L4₹34.9 L+₹5.4 L (18.2%)Rejected-AOC A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L4 | Rejected-AOC Higher Rate | |
| 5 | L5₹38.7 L+₹9.2 L (31.2%)Rejected-AOC RZF 498 MG MARG RAJ NAGAR II PALAM DELHI CANTT 110077 | NEW DELHI | DELHI | 110077 | L5 | Rejected-AOC Higher Rate |
Tender Value
₹41.4 L
EMD Value
₹82,800
Closing Date
30 Mar 2021, 6:00 pmClosed
GE NEW DELHI
GE NEW DELHI
SPECIAL REPAIR TO ROOF TREATMENT OF MAIN BUILDING, ADDN/ALTN AND SPECIAL REPAIR IN KITCHEN IN P3 MAIN BUILDING AND PROVN OF METALLIC WIRE MESH ON TERRACE SHIFTING AREA IN A, B AND C BLOCK AT NOM VARUNA IN THE AOR OF AGE B/R NAVY UNDER GE NEW DELHI
2021_MES_427144_1
GE/ND-76/2020-21
Open Tender
Civil Works
Item Rate
210 days
GE NEW DELHI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE NEW DELHI
₹82,800
Yes
29 May 2021
2 Mar 2021
1 Apr 2021
2 Mar 2021
30 Mar 2021
16 Mar 2021
Amount
Removing / Dismantling of existing roof/chajja treatment of any type, Brick tiles or terracing tiles, like plastic felt/HP tiles including existing plastering /concrete in covering of any thickness & cleaning the slabs with wire brushes complete including removal of debris to be disposed outside of MOD premises complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removal of debris to be disposed outside of MOD premises complete all as specified and directed.
M&L for brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in levelling course over roof complete all as specified and as directed.
M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
M&L for preparation of RCC roof slab by removing dust, dirt & applying oil bound bituminous primer at 0.2 kg per Sqm & providing 4mm thick APP modified water proofing membrane weighing not less than 4kg/Sqm, reinforced with non woven polyester mat weighing not less than 160 gms per Sqm including minimum 10cm side/overlap & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm complete all as specified and as directed.
M&L for hydraulically pressed plain cement concrete tiles of size 250x250x19/20 mm laid over & including cement mortar screed 15 mm thick in CM 1:6 and joined, pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and as directed.
Taking up or down steel tubing and connections of 25mm bore dia of pipe including cleaning for refixing or removal to store complete all as specified and directed.
S&F 25mm bore dia medium grade galvanised steel tubing with all fittings and fixed to wall or laid in floor complete all as specified and directed.
All as per item no. 9.00 here-in-before but fixing only
Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete in all respect as specified and directed.
M&L for brickwork with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.
M&L for 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed. (Note: SBR latex shall be measured and paid separately)
Supply only Styrene Butadiene Rubber latex emulsion. Make of SBR emulsion/latex: Sika, Fosroc, STP, Dr Sunanada, BASF
M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and including one coat of 2 mm thick putty complete all as specified and directed.
Dismantling existing water tank and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet as specified & directed Engr-in-Charge.
S&F ball brass valves high pressure with polythene float & flynut complete, screwed for Iron pipe or brass ferrule of 25 mm dia and fixed complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F 110 mm dia PVC (SWR) pipes 5 mm thick single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Prakash/Supreme/ Vectus
S & F 110 mm PVC (SWR) bends any radius
S & F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal
S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal
S & F 110 mm PVC (SWR) Couplers
S & F 110 mm PVC (SWR) reducers
S & F 110 mm PVC (SWR) Cowl
S&F 150mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed. (Minimum weight 100gms)
S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165
Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking up or down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20mm bore dia medium grade, galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.
Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick plaster in CM (1:6) on fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screeding of 10 mm thick in CM 1:3 on wall complete all as specified and directed.
M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of old decorated surfaces of wood exceeding 10cm width or grith not otherwise provided for, complete all as specified and directed.
M&L for preparing old surfaces of steel and iron work of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over and including one coat of 1mm thick putty complete all as specified and directed.
M&L for one coat of white wash including preparation of old decorated surfaces of ceiling complete all as specified and directed.
M&L Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed. Make of SBR emulsion/latex: Sika, Fosroc, STP,Dr Sunanada, BASF
M&L for brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make: Jaquar Code : QQT-7053 or equivalent in Kohler or Hindware.
S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : KUB-35041 or equivalent in Kohler or Hindware.
Supply and fixed in repair 32mm bore dia CP finish copper alloy bottle trap heavy complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code - ALD-769B or equivalent in Kohler or Hindware.
S&F Steel rolling shutters of thickness of laths 1.25 mm, with ball bearing, safety lock of four levers incl connected items as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.
S&F Expanded metal, dia of wire not less than 2 mm with mesh size 20mm, cut to length, bent to shape required and fixed with frame with nuts and bolts washers etc, supplied and fixed complete to wood or steel members (weight exc 4 kg per square meter) complete all as specified and directed.
S&F Wire netting of stainless steel wire 1.40mm dia with mesh size 20 mm, fixed with tinned tacks of wire staples complete all as specified and directed.
S&F Framed work as in doors or gates of equal angle Fe-410-W (Gde-E-250) Quality A, 25mm x 25 mm with 4 mm thickness and hot rolled steel flats 20 mm width with 3 mm thickness or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and as directed.
RISHU CONSTRUCTION COMPANY
sony engineering works
akhil enterprises
MRITUNJYA ASSOCIATES
Shivam Firetech Engineers
GLIBS CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .