ADDN/ ALTN OF BLDG NO. E-50 AT JYOTI STADIUM UNDER GE (EAST ) FEROZEPUR CANTT

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, for lying cables etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and as directed.

M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified and as directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete complete all as specified and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and as directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns etc rough finished surface of concrete all as complete all as specified and as directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete complete all as specified and as directed.

M&L Reinforcement cement concrete M-20( 1:1.5:3) nominal mix using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, Plinth beam, bases of columns etc complete all as specified and as directed.

M&L Reinforcement cement concrete M-20( 1:1.5:3) nominal mix using 20mm graded stone aggregate as in in Columns, pillers, piers, post & struts complete all as specified and as directed.

M&L Reinforcement cement concrete M-20( 1:1.5:3) nominal mix using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span complete all as specified and as directed.

M&LReinforcement cement concrete M-20( 1:1.5:3) nominal mix using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per item No 13 above but 5mm dia and over upto and incl 10mm dia in stirupps,spacers and binders etc complete all as specified and as directed.

Demolition of un-reinforced cement concrete of any description and in any position complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as complete all as specified and directed

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L 75 mm thick cement concrete, type D-2, 1:4:8 (40mm graded aggregate) as in sub floors, sub bases, floors etc. complete all as specified and as directed.

Taking down cement plaster of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished faie & even complete all as specified and as directed.

M&L preparation of new plastered applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed.

M&L for Complete removal of existing treatment from walls etc and applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over old surfaces complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L Non - skid Ceramic coloured tiles heavy duty for outdoor 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm cement screed bed or bedding layers in CM 1:6 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 15 mm cement screed bed or bedding layers in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.

All as per item No 28 here in before but using old kota stone slab retrived from demolition complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for grinding and Mirror polishing on existing terrazo/ marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified & directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed

Material & labour for Glazed ceramic coloured tiles in vertical surfaces 350x 250x 7mm / 450X 350X 7 set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces complete all as specified and directed

Material & labour for Vitrified Ceramic double charged dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L Granite (of any type) in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 10 mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces complete all as specified and directed

S&F Structural steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410 -W (GdeE- 250) qualityAincluding distance pieces, cleats etc. complete all as specified and as directed.

S&F Mild steel work as in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified & directed

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, of length exc 10cm and n exc 15cm long, diametre of neck 16 to 20 mm complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified & directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed

S&F Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item No 43 herein before above but plain steel sheet 0.50mm thcik complete all as specified and as directed.

S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

M&L Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed.

DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) orminsulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F M&L solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclisive of solvent cement and fixing at site on pvc frame as per specifications and drawing as per specified in MES Sch Part -II complete all as specified and directed

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drg complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work size of grid 605x605mm for false ceiling complete all as specified and as directed.

S&F Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat forfixing etc complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Anodised aluminium door shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm single sideprelam PVC sheet rainforced with MS square tube complete all as specified and directed

S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F mild steel mortice lock verticle type size 100 mm, 4 levers complete all as specified & directed

S&F 100mm Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F 75mm Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed

S&F Aluminium handles, cast type, anodised 150 mm complete all as specified and directed

S&F Extruded brass handles, fabricated type polished 150 mm complete all as specified and directed

S&F Toilet paper holder of brass, chromium plated with flat recessed type stainless steel complete all as specified and directed

S&F in repair Fancy type stop cock 15 mm cast copper alloy cromium plate complete all as specified and directed. Make:- Jaguar Cat No- ALI-85053 or Equivalent cat part in make Marc, ESS ESS

S&F in repair 15 mm bore Bib tap cast copper alloy chomium plated complete all as specified and directed Make :-Jaguar (Cat No KUP-35037 PM) or Equivalent cat part in make Marc, ESS ESS

S&F in repairs brass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floorscomplete all as specified and directed

S&F in repair Viterous China one piece water closet with integral cistern, seat cover and twin flush fitting complete all as specified and directed. Make:- Prayag (Cat No-4375) or Equivalent cat part in make cera, perryware.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Vitreous China Urinal, with electronic sensor , white including connections to flushing pipe and outgoing pipes complete all as specified and directed Make: -Parryware(Cat No- C0584) or Equivalent cat part in make cera, Prayag

S&F in repairs counter vitreous china wash basin,white flat back,size 560x410x180mm mm including ,waste coupling 32 mm,, brass CP stove valve15 mm, low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection 15 mm dia 450 mm long, making good disturbed surface to match with existing complete all as specified and directed. Make: Prayag(Cat No 4790 )or Equivalent cat part in make cera, perryware.

S&F Fancy type Pillar taps, cast copper alloy,screwed for iron pipe and fixed complete all as specified and directed. (Make -Jagaur Cat No KUP35001PM) or Equivalent cat part in make Marc, ESS ESS

S&F Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick bedding layer in cement mortar (1:6) complete all as specified and directed

M&L for cement concrete type B-1 1:2:4 using 20mm graded stone aggergate as in Shelves for wash basin and similar articles with plain faces complete all as specified and directed

S&F 4.8 mm thick, plain sheet glass ground or obscured or frosted, on one side ordinary quality and glazing, with oil putty or with wooden beads, in squares exc 0.50 Sqm in each complete all as specified.

S&F 4.00 mm thick figured glass pin headed type, and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed

R.S.ENTERPRISES

M/s Surjit Singh and bros

S S BUILDERS

M/s Sanjiv Kumar

KAMALJIT SINGH CONTRACTOR

Karan Engineers

Manjeet Singh Contractor