Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹26.5 L+₹78,715 (3.06%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹27.2 L+₹1.5 L (5.71%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹27.6 L+₹1.9 L (7.36%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹28.0 L+₹2.2 L (8.67%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹25.0 L
EMD Value
₹50,000
Closing Date
12 Mar 2024, 4:05 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
COMPREHENSIVE REPAIR AND MAINTENANCE OF BUILDING INTERNAL WIRING/ELECTRIFICATION, REPLACEMENT OF FIXTURES AND FITTING LED LIGHT SUB MAIN WIRING CONTROL CABLES SERVICE WIRES EXHAUST FAN WITH CONNECTED ITEMS ATRUPA AREA PH ONE OF AGE E/M UNDER G
2024_MES_643360_1
8475/E8
Open Tender
Civil Works
Item Rate
180 days
BIRPUR
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹50,000
Yes
19 Apr 2024
20 Feb 2024
13 Mar 2024
20 Feb 2024
12 Mar 2024
5 Mar 2024
Amount
Material & Labour for light/fan Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly upto Ceiling rose/light point with complete all as specified and directed by Engr-in-Charge.
One light point controlled by two two-way switch 5/6 Amp complete all as specified and as directed .
One bell/buzzer point controlled by one bell push complete all as specified and as directed .
All as per item No. 1 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 1 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
All as per item No. 1 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified.
M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
S&F Socket outlet 2 in 1, 5 pin, 5 amp flush type
S&F Socket outlet 2 in 1, 5 pin, 5 and 15 amp flush type
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
Supply and fixing in replacement of ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
S&F switch piano two way, 5/6 Amp, flush type (ISI marked), single pole, complete all as specified & directed.
S&F bell/buzzer push 5/6 Amp,flush type complete all as specified & as directed.
S&F call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed.
Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F LED lamp 5 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
S&F LED lamp 9 Watt, Warm White, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
S&F LED lamp 12/13 Watt, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
S&F LED lamp 15 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
S&F in replacement LED tube mirror type with high out put diffuser 4 feet,18 watt 220 V AC decorative one side connection type with driver holder complete all asspecified & directed. Make:- Havells/Crompton/ Syska
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make:- Havells/Crompton/Syska
Supply and fixing LED light fitting mirror type with high out put diffuser 4 feet, 18 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make:- Havells/Crompton/Syska
Supply and fixing LED lights fitting, 220V, AC decorative box type with holder suitable for fixing LED tube light 18/20 Watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F Downlighter round 15 W recessmounting type & Driver incl integrated electronic driver including taking down old unsv one complete all as specified and directed of Make :- Havells /Bajaj/Crompton
S&F Downlighter round 15 W surface mounting type & Driver incl integrated electronic driver including taking down old unsv one complete all as specified and directed of Make :- Havells /Bajaj/Crompton
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at sitecomplete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in replacement of LED luminaire 600 mm x 600 mm, 30 watt, 220 V AC surface mounting type with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at site complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size with complete all as specified and directed by Engr-in-Charge.
S&F in repair Post top energy saving, environmental friendly, asthetically designed with indirect symmetrical light distribution, die-cast , aluminium IP-65 luminaire with high power MOON LED as light source of capacity 15 W, 6500 K, complete all as specified and directed.Model No RUBYMINIPT15WLED830PSYMTOPC of Havells/Crompton/Bajaj
S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site all as specified and directed.
S & F of GI brackets for fixing LED building security light fitting fabricated out of GI tubing 25 mm dia, light grade, 0.9 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron -02 Nos complete for fixing on wall including all fixing arrangements such as fastners, bilts, nuts, bolts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. Make :- Havells/L&T/Indoasian
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. Make :- Havells/L&T/Indoasian
S & F in replacement of MCCB, 04 Pole, capacity 100 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed. Make :- L&T/Havells/Indoasian
S & F in replacement of MCCB, 04 Pole, capacity 125 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed. Make :- L&T/Havells/Indoasian
Taking down of defective geyser of any capacity from different locations for repair including removing of electric connection, pipe fitting without any damage and refixing the same after repair in same/desired location complete all as specified & directed. Note :- The parts required for repair shall be measured separately under relevent item of Sch 'A'
S&F copper/SS body inner shell suitable for water storage heater (geyser) of 50 ltr capacity as per sample including taking down old unsv steel/copper tank complete all as specified and as directed
S&F outer body of water storage heater (geyser)of 50 ltr capacity as per sample including taking down old unsv outer body complete all as specified and as directed
S&F copper/SS body inner shell suitable for water storage heater (geyser) of 25 ltr capacity as per sample including taking down old unsv steel/copper tank complete all as specified and as directed
S&F outer body of water storage heater (geyser)of 25 ltr capacity as per sample including taking down old unsv outer body complete all as specified and as directed
M&L for glass wool packing required for cover the 25/50 ltrs copper inner shell to avoid the heat conduction including taking out old packing all as specified & directed.
S&F heating coil 1500 Watt in existing storage water heater(Geyser) suitable for 25 Ltrs capacity all as specified & directed.
S&F heating coil 2000 Watt in existing storage water heater(Geyser) suitable for 25 Ltrs capacity all as specified & directed.
S&F thermostat range of 30-80 degree, as per site requirement, size as per sample all as specified & directed.
S&F non return valve brass suitable of 15 mm dia including taking down all as specified & directed.
S&F indicator lamp red/green colour suitable for storage water heater any capacity all as specified & directed.
S&F steel pipe connection 45 cm long both end brass suitable for hot water supply and screw down 15 mm GI pipe complete all as specified & directed. Make :- Prayag/Supreme/SFMC
M&L for replacement of 12 x 100 MM bolts grouting in bricks masonary wall with 1:4 CM for mounting geyser all as specified & directed.
S&F geyser base plate front & rear suitable for existing geyser of capacity 25/50 ltrs complete all as specified & directed.
Taking down of defective exhaust fan any capacity/make/model/size from its original locations for repair including sealing of cable end , dismantling blades, clamps with bush, louvers & motors, refixing the same after repair & assembling complete set in same location etc including testing complete all as specified & directed
S&F in repair/replacement of exhaust fan motor suitable for exhaust fan 150 mm sweep plastic body . make :- Havells/crompton/Bajaj
S&F in repair/replacement of exhaust fan motor suitable for exhaust fan 200 mm sweep plastic body. make :- Havells/crompton/Bajaj
S&F in repair/replacement fan blade suitable for exhaust fan 150 mm sweep plastic body . make :- Havells/crompton/Bajaj
S&F in repair/replacement of fan blade suitable for exhaust fan 200 mm sweep plastic body. make :- Havells/crompton/Bajaj
S&F in repair/ replacement of old unservisable of frame made with engineering plastic complete suitable for 150 mm exhaust fan plastic body white colour all as directed
S&F in repair/ replacement of old unservisable of frame made with engineering plastic complete suitable for 200 mm exhaust fan plastic body white colour all as directed
Supply only louvers suitable for exhaust fans 150 mm sweep.make :- Havells/crompton/Bajaj
Supply only louvers suitable for exhaust fans 225/230 mm sweep.make :- Havells/crompton/Bajaj
Supply only louvers suitable for exhaust fans 300mm sweep.make :- Havells/crompton/Bajaj
Supply only louvers suitable for exhaust fans 450 mm sweep.make :- Havells/crompton/Bajaj
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 150 mm sweep. make :- Havells/crompton/Bajaj
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 225/230 mm sweep. make :- Havells/crompton/Bajaj
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 300 mm sweep. make :- Havells/crompton/Bajaj
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 450 mm sweep make :- Havells/crompton/Bajaj
S&F in replacement of old unservisable of frame with four legs suitable for 450 mm exhaust fan metal body of smoke grey colour all as directed
S&F in replacement of old unservisable of frame with three iegs suitable for 300 mm exhaust fan metal body of smoke grey colour all as directed
S&F in replacement of old unservisable of frame with four iegs suitable for 225/230 mm exhaust fan metal body of smoke grey colour all as directed
S&F in replacement of old unservisable of frame with four iegs suitable for 150 mm exhaust fan metal body of smoke grey colour all as directed
S&F in replacement of old unservisable of fan blade with split pin suitable for 150 mm exhaust fan metal body of smoke grey colour all as directed
S&F in replacement of old unservisable of fan blade with split pin suitable for 225/230 mm exhaust fan metal body of smoke grey colour all as directed
S&F in replacement of old unservisable of fan blade with split pin suitable for 300 mm exhaust fan of smoke grey colour all as directed
S&F in replacement of old unservisable of fan blade with split pin suitable for 450 mm exhaust fan of smoke grey colour all as directed
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing with complete all as specified and directed by Engr-in-Charge.
S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run.)
S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.)
S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of following sizes. Make :- Havells/ KEI/ polycab /Finolex
Description all as per item No. 78 above but one twin core cable flat or circular of size 10 sqmm
Description all as per item No. 78 above but one twin core cable flat or circular of size 6 sqmm
Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.
Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.
M/S DKT CONSTRUCTION
M/S DK TRADERS
M/S ASHOK CONSTRUCTION
M/S R N ENTERPRISES
M/S SUNRISE CONSTRUCTION AND CO
M/S NIRMAL TRADERS
M/S KUNKAPU ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .